Schwinn Evolution Assembly Bedienungsanleitung

PN001-7190 Rev A (12/11/2007)

Nautilus®Bowflex®Schwinn®Fitness Pearl Izumi®StairMaster®Universal®Nautilus Institute®

Owner’s Manual

Evolution®, Evolution®SR

Schwinn®IC Bikes

Nautilus®Bowflex®Schwinn®Fitness Pearl Izumi®StairMaster®Universal®Nautilus Institute®

Introduction

Thank you for making the Schwinn®Evolution®Bike a part of your exercise and ﬁtness activities. For years to come, you’ll

be able to rely on Schwinn®craftsmanship and durability as you pursue your personal ﬁtness goals.

The Schwinn®Evolution®Bike is designed to closely simulate the feel and aerobic qualities of road cycling without the

associated distractions. Its unique design, with ﬁxed gearing and a high-inertia ﬂywheel, produces a smooth, intense

workout. By combining true road-racing geometry with high quality cycling componentry, you can cycle at far higher RPMs

(revolutions per minute). Cycling at higher cadences and at varying resistance levels develops cardiovascular ﬁtness, leg

strength, concentration and balance. The Schwinn®Evolution®Bike should enable you to:

 Increase your energy level

 Increase cardiovascular and aerobic ﬁtness

 Increase lower body muscle strength

 Decrease your overall percentage of body fat

Whether you are just getting started in an exercise program or are already in good shape, the Schwinn®Evolution®Bike is

designed to be an efﬁcient, challenging, yet enjoyable way to achieve an enhanced level of ﬁtness. You can cycle your way

to a slimmer and healthier body.

This Owner’s Manual contains all the information you need to operate and enjoy your Schwinn®Evolution®Bike. Please

read the Owner’s Manual in its entirety before getting onto the Schwinn®Evolution®Bike.

Let’s get started. Take your time and have fun.

Owner’s Manual

Table of Contents

Safety Warnings 4

Safety Warning Labels 5

Product Speciﬁcations 6

Features 7

Operation 8

How to use the Schwinn®Evolution®Bike 8

Maintenance 11

Moving your Schwinn®Evolution®Bike 11

Leveling your Schwinn®Evolution®Bike 11

Maintenance schedule 12

Chain adjustment 13

Limited Warranty 14

Contact Numbers 15

Owner’s Manual

Safety Warnings

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Read and understand the complete Owner’s Manual.

Read and understand all Warnings on this machine.

Before using this equipment, obey the following warnings:

• Keep children away from this machine. Watch them closely when near the machine. Moving parts that appear dangerous to adults

may not appear so to children.

• Consult a physician before starting an exercise program. Stop exercising if you feel pain or tightness in your chest, become

short of breath, or feel faint. Contact your doctor before using the machine again.

• The flywheel momentum of the Schwinn®IC Bike will keep the pedals turning even after the rider stops pedaling or the rider’s

feet slip off. DO NOT ATTEMPT TO DISMOUNT THE BIKE OR REMOVE YOUR FEET FROM THE PEDALS UNTIL BOTH THE

PEDALS AND THE FLYWHEEL HAVE COMPLETELY STOPPED. Failure to follow these instructions may lead to loss of control

and serious personal injury.

• Examine this machine for loose parts or signs of wear. Contact Nautilus Customer Service for repair information. Use only

genuine Schwinn®IC replacement parts supplied by Nautilus.

• Do not wear loose clothing or jewelry. This machine contains moving parts.

• Do not place fingers or any other objects into moving parts of the exercise equipment.

• Maximum user weight limit: 300 lb. (136 kg). Do not use if you are over this weight.

• Stabilize the pedals before stepping on them and use caution when stepping off the machine.

• Keep at least 19.7 inches (0.5 m) on each side of the machine clear. This is the recommended safe distance for access and

passage around and emergency dismounts from the machine.

• Warn bystanders to keep a safe distance, at least 3 feet (1 m). Do not allow anyone to touch the operator while the machine is

in motion.

• Keep the foot pedals clean and dry.

• Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

Owner’s Manual

Safety Warning Labels

BEFORE USING YOUR PRODUCT: Find and read all warning labels. Replace any warning label if damaged, illegible or

missing. Call 1-800-864-1270 if you need to replace warning label(s).

Serial Number

Label 1

Label 2

Label 1: General warning label.

Location: On water bottle holder

on main frame.

Label 2: Chain warning label.

Location: Inside the chain guard.

Owner’s Manual

Product Specifications

Dimensions 50” L x 22.5” W x 40” H (127cm x 57cm x 102cm)

Assembled Unit Weight 119 lbs (54 kg)

Packaged Shipping weight 124 lbs (56 kg)

Workout Area 89” L x 61.5” W (227cm x 156cm)

Maximum User Weight 300 lbs (136 kg)

Owner’s Manual

Features

Seat Adjustment

Anatomically designed seat adjusts for height and fore/aft position with locking pop pins. Adjustments accommodate

various body types and allow for workout of different muscle groups.

Multi-position Handlebars

Specially designed for in and out-of-the-saddle riding. The PVC-coated bar provides a variety of hand and arm position

for comfort and stability. Features a locking pop pin for height adjustments.

Resistance Control Knob & Emergency Brake

Turning knob increases or decreases resistance on the ﬂywheel. Pressing down on the red emergency brake lever will

stop the ﬂywheel and pedals.

Perimeter Weighted Flywheel

Concentrated mass on the outer edge combined with large gear ratio creates high inertia that best replicates the real

world cycling experience.

Schwinn®Smart Release™System (Evolution®SR model only)

Patented design offers all the beneﬁts of a ﬁxed gear, essential to the Schwinn®Cycling workout, while adding a unique

“coasting feature”.

Zinc Plated Frame

Stainless Steel Hardware

High tech, monococque (one-piece) heavy gauge steel frame. Frame is completely zinc plated prior to application of

powder coat ﬁnish for maximum corrosion resistance. Stainless steel fasteners throughout also resist corrosion.

Stainless Steel Pop-Pin

Positive-lock pop pins are constructed from corrosion resistant stainless steel with plastic T-handles. Pip pins can be

quickly threaded tight for a secure hold on the sliding tubes.

Position Numbering

Numbers are permanently stamped into the stainless steel material allowing the user to easily replicate their most

comfortable riding position.

Owner’s Manual

HOW TO USE THE SCHWINN®EVOLUTION®BIKE

You have full control over the levels of resistance integrated into your workout. Typically, lower resistance levels enable you to move

at a faster pace, placing increased demand on your cardiovascular system. Higher resistance levels will typically deliver more of a

muscle/endurance workout at lower RPMs. But everyone is different! Experiment and ﬁnd the beginning level of resistance that is

comfortable for you.

Resistance adjustment

Pedaling resistance is controlled by the resistance control knob conveniently located underneath the handlebars. To

increase resistance, turn the resistance control knob clockwise (+). To decrease resistance, turn the resistance control

knob counterclockwise (–). Resistance adjustments can be easily made at any time.

Emergency Brake Activation

Your Evolution®bike features an emergency brake. If you wish to stop the ﬂywheel rotation (and therefore the pedal rota-

tion) quickly, simply press DOWN ﬁrmly on the brake lever that extends from the resistance adjustment knob. Continue

applying pressure until the wheel has come to a complete stop.

Seat adjustment

Proper seat height helps ensure maximum exercise efﬁciency and comfort, while reducing the risk of injury.

Adjusting the seat forward or backward allows you to work different lower body muscle groups.

1. Place one pedal in the upward position, then place your foot in the toe clip and center the ball of your foot over the

center of the pedal. Your leg should be slightly bent at the knee.

2. If your leg is too straight or your foot cannot touch the pedal, you will need to move the seat down. If your leg is bent

too much, you will need to move the seat up.

3. Dismount the bike and loosen the locking pop pin by turning the handle counterclockwise. Pull out the spring-loaded

knob to release the locking pin from the preset seat position hole.

4. Raise or lower the seat to the desired position.

Do not raise the seat above the STOP mark.

5. When the seat is in the desired position, release the spring-loaded knob, re-positioning the locking pin in the desired,

preset hole. Turn the handle clockwise to tighten the knob.

6. Try several seat heights to ﬁnd the most comfortable position.

7. Note the position number on the side of the tube for future reference.

8. To adjust the forward or backward seat position, dismount the bike and loosen the locking pop pin by turning

counterclockwise. Pull out the spring-loaded release knob, releasing the locking pin from the preset position hole.

9. Slide the seat forward or backward to the desired position.

10. When the seat is in the desired position, release the spring-loaded mechanism to re-position the locking pin into the

desired, preset hole. Turn the handle clockwise to tighten the knob.

Operation

Owner’s Manual

Operation

11. Note the position number on the side of the tube for future reference.

Handlebar adjustment

The handlebars may be adjusted to more accurately simulate the upper body position of road cycling. Raise or lower the

handlebars for a more efﬁcient, comfortable ride.

1. To raise or lower the handlebars, loosen the locking pop pin. Pull out the spring-loaded release knob. This releases the

locking pin from the preset handlebar position hole.

2. Raise or lower the handlebars to the desired position.

Do not raise the handlebar above the STOP mark.

3. When the handlebars are in the desired position, release the spring-loaded knob, re-positioning the locking pin in the

desired, preset hole. Turn the handle clockwise to tighten the knob.

4. Try several handlebar settings to ﬁnd the most comfortable position. Note the position number on the side of the tube

for future reference.

Foot positioning/pedal strap adjustment

Place the ball of each foot in the toe clip until the front of the shoe ﬁts snugly in the toe clip cage. Rotate one foot to within

arm’s reach, then tighten the webbed cloth strap of the toe clip around your shoe by pulling up on the strap. Pull up on the

strap until the cage of the toe clip ﬁts snugly around the shoe. Repeat for the other foot. Point your toes and knees directly

forward to ensure maximum pedal efﬁciency.

Lower body workout

Once you are in position and sitting comfortably, slowly begin pedaling, with your hands resting comfortably on the handle-

bars. Pedal casually and rhythmically at a low resistance level until you feel secure and comfortable. As you feel more and

more comfortable, experiment with seat positions and resistance levels.

Upper body positioning

For added enjoyment, comfort and variety during your workout, experiment with moving your hands to various positions on

the handlebars.

• Do not attempt to ride this bike at high RPMs or in a standing position until you have practiced and are comfortable riding at

slower RPMs.

• After exercising, turn the adjustment control knob clockwise (+) to increase tension so the pedals will not rotate freely and

possibly hurt someone.

Owner’s Manual

Operation

Dismounting the unit

There are four ways to stop the Schwinn®Evolution®Bike pedals.

1. Pedal slower until you come to a complete stop.

2. Increase the resistance by turning the resistance adjustment control clockwise until you come to a complete stop.

3. Engage the emergency brake by pushing DOWN ﬁrmly on the emergency brake lever that extends from the resistance

adjustment knob. Continue applying pressure until the wheel has come to a complete stop.

NOTE: The Schwinn®Smart Release™system feature is standard on the Schwinn®Evolution®SR. Please verify that your

exercise bike has this feature before utilizing stopping method #4.

4. Apply back pressure to the pedals and the Smart Release™system will activate. Continue applying pressure until both

the pedals and the ﬂywheel come to a complete stop.

WARNING! The ﬂywheel momentum of the Schwinn®Evolution®Bike will keep the pedals turning even after the

rider stops pedaling or the rider’s feet slip off. DO NOT ATTEMPT TO DISMOUNT THE BIKE OR REMOVE YOUR FEET

FROM THE PEDALS UNTIL BOTH THE PEDALS AND THE FLYWHEEL HAVE COMPLETELY STOPPED. Failure to follow

these instructions may lead to loss of control and serious personal injury.

Owner’s Manual

Andere Handbücher für Evolution Assembly

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Schwinn Heimtrainer Handbücher

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn SR23 Bedienungsanleitung

Schwinn

Schwinn 131 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 150 Upright Bike Bedienungsanleitung

Schwinn

Schwinn IC2i Bedienungsanleitung

Schwinn

Schwinn 213 Bedienungsanleitung

Schwinn

Schwinn 207P Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn U130i Bedienungsanleitung

Schwinn

Schwinn 113/213 Bedienungsanleitung

Schwinn

Schwinn Airdyne Backdraft Bedienungsanleitung

Schwinn

Schwinn 190 Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 230 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 145 Bedienungsanleitung

Schwinn

Schwinn 250 Bedienungsanleitung

Schwinn

Schwinn NAUTILUS A10 Bedienungsanleitung

Schwinn

Schwinn 220 Recumbent Bike 2012 model Bedienungsanleitung

Schwinn

Schwinn 120 Upright Bike 2010 model Bedienungsanleitung

Schwinn

Schwinn 10 Series Bike Bedienungsanleitung

Schwinn

Schwinn Fitness 122 Bedienungsanleitung

Schwinn

Schwinn S.C. 5 Bedienungsanleitung

Schwinn

Schwinn 230i Bedienungsanleitung

Schwinn

Schwinn Fitness 212 Bedienungsanleitung

Schwinn

Schwinn IC Pro Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

Weslo

Weslo Vector 302 Kurzanleitung

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Pro-Form

Pro-Form 345 Zlx Bike Benutzerhandbuch

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung