SICK WS24-2 Series Bedienungsanleitung
OPERATING INSTRUCTIONS
WS/WE24-2
Compact photoelectric sensors
en, de, fr, pt, it, es, zh, ja, ru
Described product
W24-2
WS/WE24-2
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is only
permissible within the limits of the legal determination of Copyright Law. Any modifica‐
tion, abridgment or translation of this document is prohibited without the express writ‐
ten permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
2006/42/EC
NO
SAFETY
8008782.14BT | SICK
Subject to change without notice 3
Contents
1 General safety notes......................................................................... 5
1.1 Safety notes.............................................................................................. 5
2 Notes on UL approval........................................................................ 5
3 Correct use......................................................................................... 5
4 Operating elements and status indicators.................................... 5
5 Mounting............................................................................................. 6
6 Electrical installation........................................................................ 6
6.1 WS/WE24-2Bxxx, WS/WE24-2Vxxx......................................................... 7
6.2 WS/WE24-2Rxxx....................................................................................... 8
7 Additional functions.......................................................................... 9
8 Commissioning.................................................................................. 10
9 Devices with special features.......................................................... 12
10 Troubleshooting................................................................................. 12
11 Disassembly and disposal............................................................... 13
12 Maintenance...................................................................................... 13
13 Technical data.................................................................................... 13
13.1 Dimensional drawing................................................................................ 15
CONTENTS
48008782.14BT | SICK
Subject to change without notice
1 General safety notes
1.1 Safety notes
■Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by skilled per‐
son.
■
2006/42/EC
NO
SAFETY
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■These operating instructions contain information required during the life cycle of
the sensor.
2 Notes on UL approval
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
3 Correct use
The WSE24-2 is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (WS) and a receiver (WE) are required for operation. If the product is
used for any other purpose or modified in any way, any warranty claim against SICK AG
shall become void.
4 Operating elements and status indicators
Table 1: Display and operating elements
WE-2Bx4x
t2
t2
t1
t1
t1+ t2
t0
PNP
NPN
D
H
1
2
3
6
4
5
7
1Yellow LED indicator
2Potentiometer: adjust‐
ment of sensitivity
WE24-2Xx3x
PNP
NPN
D
H
1
2
3
4
1Yellow LED indicator
2Potentiometer: adjust‐
ment of sensitivity
WE-2Rx4x
t2
t2
t1
t1
t1+ t2
t0
D
H
1
2
3
5
4
6
1Yellow LED indicator
2Potentiometer: adjust‐
ment of sensitivity
WE-2Rx3x
D
H
1
2
3
1Yellow LED indicator
2Potentiometer: adjust‐
ment of sensitivity
GENERAL SAFETY NOTES 1
8008782.14BT | SICK
Subject to change without notice 5
3Switch: light (L) / dark
(D)
4Switch: NPN/PNP
5Potentiometer: adjust‐
ment of time delay t2
6Potentiometer: adjust‐
ment of time delay t1
7Potentiometer: adjust‐
ment of time stage
3Switch: light (L) / dark
(D)
4Switch: NPN/PNP
3Switch: light (L) / dark
(D)
4Potentiometer: adjust‐
ment of time delay t2
5Potentiometer: adjust‐
ment of time delay t1
6Potentiometer: adjust‐
ment of time stage
3Switch: light (L) / dark
(D)
5 Mounting
Mount sensors (sender and receiver) using suitable mounting brackets (see the SICK
range of accessories). Align the sender and receiver with each other.
NOTE
Swap the sender and receiver arrangement at every second through-beam photoelec‐
tric sensor and ensure that there is sufficient distance between the through-beam pho‐
toelectric sensors.
Receiver (WE)
Receiver (WE)
Sender (WS)
Sender (WS)
Sender (WS)
Receiver (WE)
Figure 1: Arrangement of several through-beam photoelectric sensors
Note the sensor’s maximum permissible tightening torque of 2 Nm.
6 Electrical installation
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Plug connection: note pin assignment: when the lid is open, the male connector
can be swiveled horizontally and vertically.
– Terminal connection: Note the permissible cable diameter of 5 to 10 mm. When
the lid is open, the M16 connector can be swiveled horizontally and vertically.
Unscrew the M16 connector and remove sealing plug. Lead voltage-free supply
cable through and connect sensor in accordance with table 2 and table 5.
Retighten M16 connector with seal so that the IP enclosure rating of the device is
ensured.
5 MOUNTING
68008782.14BT | SICK
Subject to change without notice
Figure 2: Opening the sensor Figure 3: Electrical connection
Only apply voltage/switch on the power supply once all electrical connections have
been established.
Explanation of the connection diagram (Tables 2-8) which are divided up into DC and
AC/DC devices:
Alarm = alarm output (see table 2 and Additional functions)
n. c. = not connected
NC = normally closed
NO = normally open
Q / Q = switching outputs
TE/Test = test input (see table 2 and table 8)
6.1 WS/WE24-2Bxxx, WS/WE24-2Vxxx
UB: 10 . 30 V DC, see "Technical data", page 13
Table 2: DC, WS
WS24-2 D3x3 D2x0 D4x0 D5x0
1+ (L+) + (L+) + (L+) + (L+)
2- (M) - (M) Test Test
3Test - - (M) - (M)
4- - n.c. n.c.
5- Test - n.c.
IN = 4 A
1 2 3 4 5
0.14 ... 1.5 mm2
IN = 4 A
12
4 3
12
5
4 3
ELECTRICAL INSTALLATION 6
8008782.14BT | SICK
Subject to change without notice 7
Table 3: DC, WE
WE24-2 B3x3 B2x0 B4x0 V5x0
1+ (L+) + (L+) + (L+) + (L+)
2- (M) - (M) n.c. n.c.
3Q/Q- - (M) - (M)
4-Q/QQ/QQ/Q
5- - - Alarm
IN = 4 A
1 2 3 4 5
0.14 ... 1.5 mm2
IN = 4 A
12
4 3
12
5
4 3
Table 4: DC
H
D
3
NPN
PNP
4
H, PNP: Q/Q (≤ 100 mA)
+ (L+)
Q/Q
– (M)
+ (L+)
Q/Q
– (M)
D, PNP: Q/Q (≤ 100 mA)
+ (L+)
Q/Q
– (M)
+ (L+)
Q/Q
– (M)
H, NPN: Q/Q (≤ 100 mA)
+ (L+)
Q/Q
– (M)
+ (L+)
Q/Q
– (M)
D, NPN: Q/Q (≤ 100 mA)
+ (L+)
Q/Q
– (M)
+ (L+)
Q/Q
– (M)
6.2 WS/WE24-2Rxxx
UB 20 V ... 250 V AC/DC, see "Technical data", page 13
6 ELECTRICAL INSTALLATION
88008782.14BT | SICK
Subject to change without notice
Table 5: AC/DC
WS24-2U2x0 WE24-2R2x0
1L1 / + L1 / +
2N / - N / -
3- Relay
4- Relay
5- Relay
1 2 3 4 5
0.14 ... 1.5 mm2
IN = 4 A
1 2 3 4 5
0.14 ... 1.5 mm2
IN = 4 A
Table 6: AC/DC relay
Relay
H
D
3WE24-2R2x0
H
3
4
5
3
4
5
Imax. = 4A@250V AC
4A@24V DC
0.125A@250 V DC
UL: 4A @ 250 V AC, general
use
4A @ 250 V AC, resistive
(NO)
3A @ 250 V AC, resistive
(NC)
4A @ 24 V DC, NO, general
use
3A @ 24 V DC, NC, general
use
R300
B300 (NO contacts only)
D
3
4
5
3
4
5
WE24-2R5x8, WE24-2R5x9: Imax. = 2.5 A @ 250 V AC, 2.5 A @ 24 V DC, 0.125 A @250
VDC
7Additional functions
Alarm
Alarm output: the sensor (WE24-2Vxxx) features a pre-failure notification output
(“Alarm” in connection diagram [see "WS/WE24-2Bxxx, WS/WE24-2Vxxx", page 7]),
which issues a notification if the sensor is only ready for operation to a limited extent.
ADDITIONAL FUNCTIONS 7
8008782.14BT | SICK
Subject to change without notice 9
Possible causes: sensor is contaminated, sensor is out of alignment. PNP: alarm → M
signal reserve > 50% LOW, NPN: alarm → L+ signal reserve > 50% HIGH. The LED indi‐
cator flashes in this case.
Table 7: Alarm
Alarm (≤ 100 mA)
+ (L+)
Alarm
– (M)
+ (L+)
Alarm
– (M)
Test input
Test input: the WS24-2B / -V sensors feature a test input (“TI” or “Test” on the connec‐
tion diagram [see "WS/WE24-2Bxxx, WS/WE24-2Vxxx", page 7 and see table 8]), which
can be used to switch the sender off and, therefore, check that the sensor is function‐
ing correctly: if female cable connectors with LED indicators are used, you have to
ensure that the TI is assigned accordingly.
There must be no object between the sender and receiver; activate the test input (see
the connection diagram [see "WS/WE24-2Bxxx, WS/WE24-2Vxxx", page 7 and see
table 8], TE at 0 V). The send LED is shut down or the detection of an object is simu‐
lated. Use the following table to check the function. If the switching output fails to
behave in accordance with the following table, check the application conditions. See
section Fault diagnosis.
Table 8: Test
Test
+ (L+)
Test
– (M)
+ (L+)
Test
– (M)
8 Commissioning
1Alignment
Align the sender with the receiver. Select the position so that the red emitted light beam
hits the receiver. Tip: use white paper or a reflector as an alignment aid. The sender must
have a clear view of the receiver with no object in the path of the beam [see figure 4]. You
must ensure that the optical openings (front screen) of the sensors are completely clear.
7 ADDITIONAL FUNCTIONS
10 8008782.14BT | SICK
Subject to change without notice
Andere Handbücher für WS24-2 Series
1
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Sprachen:
Andere SICK Zubehör Handbücher
SICK
SICK LBV 321 NAMUR Bedienungsanleitung
SICK
SICK D 35 Series Bedienungsanleitung
SICK
SICK AS30 Prime Edge Bedienungsanleitung
SICK
SICK MultiPulse WTB4-3P2100S13 Bedienungsanleitung
SICK
SICK GRSE18V Bedienungsanleitung
SICK
SICK GLS611 Bedienungsanleitung
SICK
SICK RAY26 Bedienungsanleitung
SICK
SICK LFV 200 Bedienungsanleitung
SICK
SICK ML20 Bedienungsanleitung
SICK
SICK UM12 Series Bedienungsanleitung
SICK
SICK WT24-2 Series Bedienungsanleitung
SICK
SICK LFC Bedienungsanleitung
SICK
SICK GSE2 Flat Side Bedienungsanleitung
SICK
SICK WTB4FT DoubleLine Bedienungsanleitung
SICK
SICK GRTE18 Bedienungsanleitung
SICK
SICK MPB10 Bedienungsanleitung
SICK
SICK DT1000 Bedienungsanleitung
SICK
SICK Bluetooth WLA16 Bedienungsanleitung
SICK
SICK KTL180 Bedienungsanleitung
SICK
SICK DME4000 Bedienungsanleitung
