07.20234/24 H47.WANS004EN-05
AERO
Original operating instructions
AEROLIFE
• Comply with the safety regulations for operating electrical equipment and, if necessary, for ladders, steps and work
overhead or at certain heights.
• Use the unit only when it is in a technically sound condition.
• Do not modify the unit's components in any way.
• Please do not put any objects on top of the unit.
• Do not use the device as a seat.
• Make sure that air can flow in and out at the two outer sides without impedance. Do not hang any textiles or paper or
similar items over the air inlet and outlet ports and do not place any objects directly in front of or next to the unit. Do not
insert any objects into the openings of the unit.
• Do not remove any covers or unit components that are not defined in the "Maintenance" chapter. Do not remove the
cover of the connecting clamps inside the unit.
• The unit must be checked by a specialist in the event of a fault.
Requirements for the target group
End user
The following persons may only operate the product if they have understood the dangers involved in handling the product or if they
are supervised during operation:
• children
• persons with diminished physical, sensory or mental capabilities
• Persons
Fitters and retrofitters
We assume and require that fitters and retrofitters possess the following knowledge and skills:
• knowledge of the regulations concerning occupational safety and accident prevention
• comprehension of technical correlations according to state-of-the-art science and technology
• knowledge of professional work steps
• knowledge of the applicable standards and directives
• knowledge and skills with regard to the professional use of electrical and mechanical tooling
• knowledge and skills with regard to the professional fixing of technical elements
• knowledge and skills with regard to the professional fabrication of electrical components
• knowledge and skills with regard to the work steps:
- connecting electrical components
- commissioning electrical components
- checking the function of electrical components
• knowledge of the 5 safety rules:
- enable
- secure against reactivation
- ensure that system is voltage-free
- earthing and short-circuiting
- cover or isolate proximate live parts
SIEGENIA offers training courses for the acquisition of some of the required knowledge and skills. Contact your SIEGENIA
sales consultant in case of requirement.
