Siemens ACVATIX SQV..P Series Bedienungsanleitung

CE1N4833en

2017-11-15 Building Technologies

833

ACVATIX™

Electromotive actuators for

combi valves SQV..P..

For combi valves VPF43.. and VPF53..

∂SQV91.. Operating voltage AC/DC 24 V,

Positioning signal 3-position, DC 0-10 V, DC 4-20 mA

∂Position feedback and selection of flow characteristic

∂Manual adjuster, position and status indication (LED)

∂Selectable positioning times 40-240 seconds

∂Fail-safe function (combi valve open/closed)

∂Selection of acting direction

∂Optional functional extension: Auxiliary switch, potentiometer, and

AC 230 V module

∂Direct mounting on combi valves

∂UL approved

Use

Electromotive actuators to operate Siemens combi valves for type series VPF43..

and VPF53.. with 20/40/43 mm stroke, as control valves for ventilation, air

conditioning, district heating and refrigeration plants.

2 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Type summary

Type Stock No. Stroke Pos.

force Operating

voltage Positioning

signal

Spring

return

time

Pos. time

Fail-safe

function

20mm 40mm

SQV91P30 S55150-A130

20/40/43 mm 1100 N AC/DC 24 V

AC 230 V 1)

3-position

DC 0…10 V

DC 4…20 mA

30 sec

40 sec

60 sec

90 sec

120 sec

80 s

120 s

180 s

240 s

Stem retracts

SQV91P40 S55150-A131 Stem

extends

1) AC 230 V requires accessory ASP1.1.

2) The positioning time can be selected using the DIL switch, see page 7.

Type Auxiliary switch

pair

ASC10.42

Potentiometer

ASZ7.6/1000 AC 230 V module

ASP1.1

Stock number S55845-Z137 S55845-Z136 S55845-Z138

Max. 2

SQV91P30 Max. 1 Max. 1

SQV91P40 Max. 1 Max. 1

No spare parts available.

Revision numbers, see page 13.

Ordering

Type Stock number Designation Quantity

SQV91P40 S55150-A131 Actuator 1

ASZ7.6/1000 S55845-Z136 Potentiometer 1

Actuator, combi valve, and accessories are individually packed for delivery.

Equipment combination

Valve type DN PN class Flow V100

[m3/h] Data sheet

Combi valves

VPF43.. Flange

2,3…25

N4315

65 4,4…35

80 5,3…43

100 12,1…90

125 18,5…135

150 25,6…195

VPF53.. Flange

2,3…25

N4316

65 4,4…35

80 5,3…43

100 12,1…90

125 18,5…135

150 25,6…195

Electrical accessories

Spare parts, rev.

number

Example

Delivery

3 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Technology/Mechanical design

4833Z01

1 Status and acting direction

indication (LED)

2 Housing cover

3 Entry points for cable glands

4 Manual adjuster

5 Indication of upper end

position

6 Valve stem coupling

7 Indication of lower end

position

8 Valve neck coupling

The actuator can be operated as a 3-position or modulating actuator in two acting

directions depending on the type of connection. It is suitable for both combi valves

VPF.. with 20 mm stroke as well as for valves with a 40 mm and 43 mm stroke. The

stroke is calibrated automatically during initialization.

The actuator includes a position feedback.

The actuator travels to the end position in the event of power loss, see "Fail-safe

function", page 5. Up to 45 seconds pass until the actuator is available again following

a restart or start after the fail-safe function is triggered.

The positioning time (40 to 240 seconds) and the flow characteristic (lin/log) can be set

via the DIL switches.

The manual adjuster is disengaged.

The manual adjuster allows for manually setting the position. The motor is switched off

when the manual adjuster is engaged. The fail-safe function (spring return) is

reactivated after the manual adjuster is disengaged, and the actuator travels again to

the set position without calibration.

The actuator remains in this position without active operating voltage for as long as the

manual adjustor is engaged.

The actuator independently calibrates itself for each type of connection. Initialization

occurs as soon as operating voltage is supplied for the first time and the waiting period

ends. The actuator travels to the lower stop of the combi valve, thus enabling automatic

coupling with the valve stem. It then travels to the upper stop, records and stores it.

Recalibration can be manually triggered any time, see "Recalibration", page 5.

The combi valve can travel to any position by supplying voltage to terminal G1 or G2 as

well as L11) or L21).

∂Voltage on G2, L2: Actuator stem retracts, combi valve opens.

∂Voltage on G1, L1: Actuator stem extends, combi valve closes.

∂No voltage on G1 and G2: Actuator stem stays at the applicable

or L1 and L2: position.

1) When using the AC 230 V module ASP1.1.

Auto mode

Manual mode

Initialization, automatic

coupling, calibration

3-position control signal

4 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

The acting direction of the stroke direction can be reversed by exchanging

connections G1 and G2 or L1 and L2.

Positioning signal OPEN on G2, L2. Positioning signal CLOSED on G1, L1.

Positioning signal OPEN on G1, L1. Positioning signal CLOSED on G2, L2.

∂Do not use connection Yu (DC 0-10 V) and Yi (DC 4-20 mA).

∂Positioning times can be selected, see "Positioning times“, page 7".

∂Valve characteristic curves "lin" or "log" cannot be selected.

∂Position feedback U is activated after initialization/calibration.

Electronic motor shutdown is triggered in the end positions (valve stop or upon

reaching maximum stroke) or by overload (no end switch).

The combi valve can be driven to any position by connecting a continuous positioning

signal Yu or Yi. The acting direction can be reserved (direct/reverse acting) by

connecting operating voltage to G1 or G2:

Operating voltage AC/DC 24 V on G1 or AC 230 V on L1

∂Pos. signal to Yu, Yi increasing: Actuator stem retracts, combi valve opens.

∂Pos. signal to Yu, Yi decreasing: Actuator stem extends, valve closes.

∂Pos. signal to Yu, Yi continuous: Actuator stem remains in the respective pos.

Operating voltage AC/DC 24 V on G2 or AC 230 V on L2

∂Pos. signal to Yu, Yi increasing: Actuator stem extends, combi valve closes.

∂Pos. signal to Yu, Yi decreasing: Actuator stem retracts, combi valve opens.

∂Pos. signal to Yu, Yi continuous: Actuator stem remains in the respective pos.

Position signal Operating voltage Actuator stem Combi valve

Yu, Yi increasing G1 to AC/DC 24 V

L1 to AC 230 V

Retracts Opens

Yu, Yi increasing G2 to AC/DC 24 V

L2 to AC 230 V

Extends Closes

∂The input with the higher value has priority when a positioning signal is available

at both Yu and Yi.

∂When using the AC 230 V module ASP1.1, the SQV..P can also be

operated with a DC 0…10 V or DC 4…20 mA positioning signal.

∂The actuator travels to the applicable end position depending on the selected

acting direction if Yu or Yi are interrupted:

Operating voltage to G1 or L1 Actuator stem extends.

Operating voltage to G2 or L2 Actuator stem retracts.

∂Positioning times can be selected, see "Positioning times“, page 7".

∂Valve characteristic curves "lin" or "log" can be selected.

∂Position feedback U is activated after initialization/calibration.

∂Parallel operation with up to 5 actuators possible, see "Technical data", page 10.

Changeover of acting

direction

Direct acting

Reverse acting

Notes

Positioning signals Yu

and Yi

DC 0-10 V (Yu)

DC4-20 mA (Yi)

Direct acting

Reverse acting

Acting direction

Direct acting

Reverse acting

Notes

5 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Position feedback U (DC 0…10 V) is always proportional to stroke H for the actuator. It

is also active when using the AC 230 V module ASP1.1.

DIL switch Flow characteristics Position feedback U

lin = linear 1)

log = equal percentage, ngl = 3

(logarithmic normal)

log = equal percentage, ngl = 3

(exponential normal)

1) Factory setting

The actuator travels to the applicable end position (the stem retracts or extends

depending on the model) using the preloaded spring if operating voltage to terminal G

or L is lost or shut down. In this case, the actuator's control function is locked for 45

seconds (both LEDs are green) to reach the end position at any rate. There is no

recalibration. The reset positioning speed ensures that no pressure surges occur in the

piping.

SQV91P30 Actuator stem retracted Combi valve opened (V = 100%).

SQV91P40 Actuator stem extended Combi valve closed (V = 0%).

Recalibration can be manually triggered any time.

1. Operating voltage is supplied.

2. Engage and disengage the manual adjuster twice within 4 seconds.

3. Both LEDs flash green.

4. Recalibration is successful when both LEDs are lit green.

5. Return to normal control function.

∂Position feedback U is inactive or corresponds to value "0".

∂The shortest possible runtime is initialized.

∂Recalibration is valid only after the entire process is completed.

∂Additional engaging the manual adjuster interrupts the process.

The valve actuator indicates detected blockage by setting the feedback signal to 0 V

after ca. 90 seconds. The actuator, however, tries to overcome the blockage during this

period. Normal control function is reactivated if the blockage is overcome and position

feedback U is once again available.

Position feedback U

Fail-safe function

End position

Recalibration

Notes

Blockade detection

6 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Blockade detection is always operational. In other words, the actuator

demonstrates the following response at end positions H100 and H0not only during

initialization and calibration, but also during normal control operation:

1. The actuator travels to the end position; the LED is lit in the direction of travel.

2. It detects the end position; both LEDs are lit green.

3. It then briefly travels in the opposite direction; the LED is lit in the direction of travel.

4. It then returns to the end position; LED is lit in the direction of travel

5. It detects the end position; both LEDs are lit green.

This response is repeated with time intervals between travels increasing

exponentially. The intervals are:

25 seconds

1 min 40 seconds

6 min 40 seconds

26 min

1 h 46 min 40 seconds

7 h 6 min 40 seconds

1 day 4 h 26 min 40 seconds

for the previous interval.

The status and acting direction indication consists of two green, lit LEDs.

Indication Function

ƒLED flashes

green

ƒLED flashes

green

ƒInitialization.

ƒManual mode.

ƒDelay after operating voltage is supplied, or the

fail-safe function is triggered.

ƒSteady green

ƒ--

Actuator stem retracts.

ƒ--

ƒSteady green

Actuator stem extends.

ƒSteady green

End position reached.

ƒLED flashes

green

ƒ--

Blockage or foreign object detected during retraction.

ƒ--

ƒLED flashes

green

Blockage or foreign object detected during extension.

ƒ--

No operating voltage

The actuators can be operated using a frost protection thermostat or temperature

detector, see "Connection diagrams", page 11.

Response at the end

positions

Status and acting

direction indication (LED)

Frost protection

thermostat.

7 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

4833Z15

1 Status and acting

direction indication

(LED)

2 DIL switch

3 Connection

terminals

DIL switch Speed Positioning time

20 mm 40 mm

1234

2 sec/mm 40 sec 2) 80 sec 2)

1234

3 sec/mm 60 sec 120 sec

1234

4,5 sec/mm 90 sec 180 sec

1234

6 sec/mm 120 sec 240 sec

1) Tolerance: ± 1 sec

2) Factory setting

The flow characteristics can be used only for connections with constant positioning

signals DC 0…10 V and DC 4…20 mA.

DIL switch Flow characteristics

1234

lin = linear 1)

1234

log = equal percentage, ngl =

(logarithmic normal)

1234

log = equal percentage, ngl =

(exponential normal)

1) Factory setting

Positioning times

DIL switch

Flow characteristics

8 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Accessories

Type

Stock no. ASC10.42

S55845-Z137

ASZ7.6/1000

S55845-Z136

ASP1.1

S55845-Z138

Auxiliary switch pair Potentiometer AC 230 V module

4833Z18

4833Z17

4833Z16

Switching points can be

continuously adjusted

between 0 and 100%

0…1000 ΩAC 230 V to AC 24 V

converter

Installatio

Max. 1 Max. 1

Max. 2

See section "Technical data" (page 10) for more information.

Notes

Install electrical connections in accordance with local regulations on electric

installations as well as internal or connecting diagrams as of page 10.

Observe safety regulations and restrictions designed to ensure the safety of people

and property at all times!

∂An internal controller controls the actuator for 3-position or DC 4…20 mA

positioning signal connection types, see "Connection diagrams", page 11.

∂For DC 0…10 V connections (input impedance Ri= 100 kΩ), up to 5 actuators

can be controlled in parallel by a controller with a rating of 1 mA.

∂The switching points must be entered on the plant diagram when using the

double auxiliary switch ASC10.42.

∂Do not insulate the actuator console and valve stem, as air circulation must be

ensured.

∂Non-observance of the above may result in accidents and fires!

∂Do not touch the hot parts without prior protective measures to avoid

burns!

∂For permitted temperatures, see "Technical data", page 10.

Mounting instructions 74 319 0821 0 on mounting combi valves are included in the

actuator's packaging. Mounting instructions for accessories are located in the

respective packaging.

Accessories Mounting instructions

ASC10.42 S55845-Z137 M4833.1 74 319 0860 0

ASZ7.6/1000 S55845-Z136 M4833.2 74 319 0861 0

ASP1.1 S55845-Z138 M4833.3 74 319 0862 0

Engineering

Mounting

9 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

90°

∂Check the wiring and carry out a functional check as part of commissioning.

∂Make or check the settings as per the plant diagram for auxiliary switches and

potentiometers.

The actuators are maintenance-free.

∂Regularly check functioning (trial) of actuators with safety functions.

When servicing the actuating device:

∂Switch off both pump and operating voltage.

∂Close the main shutoff valve in the piping.

∂Release pressure in the pipes and allow them to cool down completely.

∂Disconnect electrical connections from the terminals as needed.

∂The actuator must be properly installed prior to recommissioning the valve.

Trigger stroke calibration after servicing.

∂There are no spare parts available; the entire actuator must be replaced.

∂Removing the spring on the actuator is prohibited due to the high risk of

injury.

Disposal

The device is considered an electronics device for disposal in terms of

European Directive 2012/19/EU and may not be disposed of as

domestic garbage.

●Dispose of the device through channels provided for this

purpose.

●Comply with all local and currently applicable laws and

regulations.

Warranty

The engineering data specified in section "Equipment combination" (page 2) are

only guaranteed in connection with the Siemens valves listed.

When using the actuators together with third-party valves, correct

functioning must be ensured by the user, and Siemens will assume no

responsibility.

Mounting positions

Commissioning

Maintenance

Recommendation

Repair

Note

10 / 14

Siemens Electromotive actuators for combi valves CE1N4833en

Building Technologies 2017-11-15

Technical data

SQV..P..

Power supply Operating voltage AC 24 V ± 20%

DC 24 V ± 15%

With ASP1.1 AC 230 V module AC 230 V ± 15%

Frequency 50…60 Hz

Fusing ac.DIN 57100 part 430 (supply lines)6 A…10 A slow

Power consumption 20 VA / 7,5 W

With ASP1.1 AC 230 V module 22 VA

Function data Positioning times 20 mm

40 mm

40 1) / 60 / 90 / 180 sec

80 1) / 120 / 180 / 240 sec

The positioning time depends on the DIL switch setting,

"Positioning times“(page 7)

Positioning force 1100 N

Nominal stroke 20 mm / 40 mm / 43 mm

Permissible medium temperature (valve fitted) 1…120 °C

Signal inputs Position signal Terminal G1, G2 3-position

Voltage AC 24 V ± 20%

DC 24 V ± 15%

AC 230 V ± 15%

Terminal Yu Voltage DC 0…10 V

Input impedance ≥100 kΩ

Terminal Yi Power DC 4…20 mA

Input impedance 50 Ω

Fail-safe function

Terminal G SQV91P30 Loss of operating voltage

Actuator stem retracted, combi valve fully open (100%).

SQV91P40 Loss of operating voltage

Actuator stem extended, combi valve fully closed (0%).

Spring return time 20 mm 15 sec

40 mm 30 sec

Position feedback Position feedback U DC 0...10 V

Load impedance >2.5 kΩres.

Load Max. 4 mA

Connecting cable Wire cross-sectional areas 0.75…1.5 mm2, AWG 20…16 4)

Cable entry 2 entry points M20 x 1.

1 entry points M16 x 1.5

Degree of protection Housing from vertical to horizontal IP 66 as per EN 60529

Insulation class As per EN 60730

AC / DC 24 V III

With ASP1.1 AC 230 V module II

Environmental

conditions Operation IEC 60721-3-3

Climatic conditions Class 3K5

Mounting location Indoors (weather-protected)

Temperature General 0…55 °C

Humidity (non-condensing) <95% r.h.

Transport IEC 60721-3-2

Climatic conditions Class 2K3

Temperature -30…70 °C

Humidity <95% r.h.

Storage IEC 60721-3-1

Climatic conditions Class 1K3

Temperature -30…65 °C

Humidity 5…95% r.h.

Max. media temperature when mounted on

combi valve

130 °C

Norms and directives Electromagnetic compatibility (Application) For residential, commercial and industrial environments

Product standard EN60730-x

EU Conformity (CE) CE1T4833xx01 5)

RCM Conformity CE1T4833xx02 5)

UL conformity AC / DC 24 V UL 873

AC 230 V -

Environmental

compatibility The product environmental declaration CE1E4833en

contains data on environmentally compatible product

design and assessments (RoHS compliance,

materials composition, packaging, environmental benefit,

disposal).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens G3344 Series Bedienungsanleitung

Siemens

Siemens GDA Series Bedienungsanleitung

Siemens

Siemens Acvatix G B111.9E/MO Series Bedienungsanleitung

Siemens

Siemens RVA47.320 Bedienungsanleitung

Siemens

Siemens SSC Series Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW44 Bedienungsanleitung

Siemens

Siemens OpenAir GCA Series Betriebsanleitung

Siemens

Siemens BACnet PTEC Dual Duct 2 AVS Bedienungsanleitung

Siemens

Siemens GNA 1E Series Bedienungsanleitung

Siemens

Siemens OpenAir GDE131.1U Bedienungsanleitung

Siemens

Siemens SIMATIC S7 Benutzerhandbuch

Siemens

Siemens REV200 Series Bedienungsanleitung

Siemens

Siemens GD Series Bedienungsanleitung

Siemens

Siemens N 526E02 Service-Handbuch

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens Simatic S7-400 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Benutzerhandbuch

Siemens

Siemens SIMATIC Mobile Client900WXN Bedienungsanleitung

Siemens

Siemens Powermite 599 Series Betriebsanleitung

Siemens

Siemens RWB27 Timeswitch Bedienungsanleitung

Siemens

Siemens OpenAir GIB Series Betriebsanleitung

Siemens

Siemens SIMOTION D410-2DP/PN Bedienungsanleitung

Siemens

Siemens 3RA2220 Bedienungsanleitung

Siemens

Siemens Climatix POL822 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung