Siemens PPM-1U32.BPR Bedienungsanleitung

125-5065T

Building Technologies

2012-08-06

MS/TP Point Pickup Module

Owner's Manual

Siemens Industry, Inc. 125-5065T

2012-08-06

Notice

Document information is subject to change without notice by Siemens Industry, Inc.

Companies, names, and various data used in examples are fictitious unless otherwise

noted. No part of this document may be reproduced or transmitted in any form or by

any means, electronic or mechanical, for any purpose, without the express written

permission of Siemens Industry, Inc.

Warning

This equipment generates, uses, and can radiate radio frequency energy. If equipment

is not installed and used in accordance with the instructions manual, it may cause

interference to radio communications. Equipment has been tested and found to comply

within the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential

area is likely to cause interference. Residential area equipment users are required to

take whatever measures necessary to correct the interference at their own expense.

Service Statement

Control devices are combined to make a system. Each control device is mechanical in

nature and all mechanical components must be regularly serviced to optimize their

operation. Siemens Industry, Inc. branch offices and authorized distributors offer

Technical Support Programs that will ensure continuous, trouble-free system

performance.

For further information, contact your nearest Siemens Industry, Inc. representative.

FCC Regulations

The manual for an intentional or unintentional radiator shall caution the user that

changes or modifications not expressly approved by the party responsible could void

the user’s authority to operate the equipment.

For a Class B digital device or peripheral, the instructions furnished the user shall

include the following or similar statement, placed in a prominent location in the text of

the manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.

Siemens Industry, Inc. 125-5065T

2012-08-06



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



To the Reader

Consult the dealer or an experienced radio/TV technician for help.

Your feedback is important to us. If you have comments about this manual, please

submit them to: mailto:Sbt_technical.editor.us.sbt@siemens.com

Credits

Staefa and TALON are registered trademarks of Siemens Industry, Inc.

Other product or company names mentioned herein may be the trademarks of their

respective owners.

Printed in USA

Siemens Industry, Inc. 125-5065T

2012-08-06

Table of Contents

Product Overview ...................................................................................................6

Compatibility with Siemens Native BACnet and Third-party Automation Systems....7

Board Diagrams .....................................................................................................8

Supported Sensor Types ........................................................................................9

Specifications .......................................................................................................10

Communication (RS-485 Port)..............................................................................11

HOA (Hand-Off-Auto) ...........................................................................................12

DIP Switch Settings..............................................................................................13

Baud Rate Settings .................................................................................................. 13

Status LEDs .........................................................................................................14

Change of Value Implementation..........................................................................15

Accuracy/Resolution.............................................................................................15

Wiring...................................................................................................................16

I/O Configuration Diagrams ..................................................................................17

Service Information ..............................................................................................18

Electrostatic Discharge ............................................................................................ 18

Ordering Replacement Parts ................................................................................... 18

Reinstalling the Mounting Tabs ............................................................................... 18

Glossary...............................................................................................................20

Index ....................................................................................................................21

Product Overview

Siemens Industry, Inc. 125-5065T

2012-08-06

Product Overview

The Siemens MS/TP Point Pickup Module (PPM) are expansion I/O devices that

communicate on a BACnet MS/TP network, allowing for the incorporation of a cluster

of remote points into the Building Automation Station over the MS/TP

The PPM family leverages the MS/TP network to extend the reach of any BTL-listed

BACnet Building Controllers application program.

network.

Each Universal Input can be configured for analog or digital input. Input/Output type is

configured by writing to BACnet object properties

MS/TP

Point Pickup Module (PPM).

Compatibility with Siemens Native BACnet and Third-party Automation Systems

Siemens Industry, Inc. 125-5065T

2012-08-06

Compatibility with Siemens Native BACnet and

Third-party Automation Systems

MS/TP PPM devices are BTL listed as application specific controllers (ASC) and are

compatible with other BTL-listed devices, including all Siemens BACnet building

controllers and operator workstations. All firmware revisions of Siemens Compact and

Modular BACnet building controllers support the MS/TP PPM family, and Firmware

Revision 3.2.2 and later also adds support for U-COV (unsolicited change of value).

Siemens operator workstation Revision 3.11 and later provide System Profile icons

representing MS/TP PPM devices. Siemens BACnet operator workstations with BOB

(BACnet Object Browser , available with Rev 3.7 and later) provide the ability to modify

the MS/TP PPM’s custom default device ID, device name and COV increment.

NOTE:

BACnet systems consist of devices that communicate using the BACnet protocol, and

are therefore interoperable with other BACnet products to a certain extent. Note that

interoperability is always dependent on the implementation by the manufacturer in

addition to how the device is actually applied in the field. Only commonly

implemented features will work correctly. Carefully study PICS and BTL for

interoperability when evaluating for use in a mixed manufacturer BACnet system.

Board Diagrams

Siemens Industry, Inc. 125-5065T

2012-08-06

Board Diagrams

Figure 1:

6 Point Analog controller board.

Figure 2:

6 Point Digital controller board.

Figure 3:

12 Point Combination controller board.

Supported Sensor Types

Siemens Industry, Inc. 125-5065T

2012-08-06

Supported Sensor Types

PPM Type

Digital

Analog

Combo

I/O function

Description

Maximum number of

functions per module

Digital inputs

Binary Inputs Status indication, voltage-free/dry contact 4 2 5

Counter Count/accumulator, voltage-free/dry pulse

contact

Analog inputs w/ 12-bit A/D resolution

Temperature Ni 1000 4 4

Temperature Pt 1000 385 4 4

Temperature NTC 10K Type II 1

Voltage, DC 0 to 10V 4 4

Current DC 4 to 20 mA 2

Digital outputs

BO OnOff NO Contact, 240 Vac, 5A Resistive/2 A

General Purpose

2 3

Analog outputs

DC 0 to 10V 2 2

Communication (RS-485 Port)

Siemens Industry, Inc. 125-5065T

2012-08-06

Specifications

Dimensions

Dimensions and Weight

6.1 in. x 4.5 x 1.5 in. (154 mm x 114.4 mm x 40 mm)

Weight 0.85 lb max. including box

Communication

Communications Remote Local BACnet MS/TP master or slave

9600 to 76800 baud set using DIP switch

Power Requirements Operating Range

Power Consumption

Electrical

Input power range of 19.2 Vac to 28.8 Vac (50 or 60 Hz) 4 VA to 7 VA

Universal Inputs

6 Point Digital PPMs (

PPM-1U32.BPR and PPM-1U32.BPF

1- 10KΩType II NTC Thermistor or dry contact

)

6 Point Analog PPMs (

PPM-2U22.BPF and PPM-2U22.BPR

2- 1000 Nickel RTD, 1000 Pt RTD, 0-10V, or dry contact

)

12 Point Combination PPMs (

PPM-2U3322.BPFand PPM-2U3322.BPR

2- 1000 Nickel RTD, 1000 Pt RTD, 0-10V, or dry contact

)

Digital Outputs

6 Point Digital PPMs (

PPM-1U32.BPR and PPM-1U32.BPF

2- Form A NO (Normally Open) Relays. 24 to 240 Vac, 5A resistive, 2A General

Purpose, 5(2)

)

2- Hand-Off-Auto switches provide manual operation of the relays for

commissioning

6 Point Digital PPM (PPM-1U32.BPR)

12 Point Combination PPMs (

PPM-2U3322.BPFand PPM-2U3322.BPR

3- Form A NO (Normall

y Open) Relays. 24 to 240 Vac, 5A resistive, 2A General

Purpose, 5(2)

)

Analog Inputs

6 Point Analog PPMs (

PPM-2U22.BPF and PPM-2U22.BPR

2- 1000 Nickel RTD, 1000 Pt RTD, 0-10 Vdc, or 4-20 mA

)

12 Point Combination PPMs (

PPM-2U3322.BPFand PPM-2U3322.BPR

2- 1000 Nickel RTD, 1000 Pt RTD, 0-10 Vdc

)

Analog Outputs

6 Point Analog PPM (

PPM-2U22.BPF and PPM-2U22.BPR

2- 0-10 Vdc

)

12 Point Combination PPM (

PPM-2U3322.BPFand PPM-2U3322.BPR

2- 0-10 Vdc

)

Digital Inputs

6 Point Digital PPMs (

PPM-1U32.BPR and PPM-1U32.BPF

)

3- Dry contact or Pulse accumulator

12 Point Combination PPMs (

PPM-2U3322.BPFand PPM-2U3322.BPR

3- Dry contact

)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200SP DI 8x24VDC ST Bedienungsanleitung

Siemens

Siemens Simantic ET200SP Benutzerhandbuch

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens 262E01 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200L Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC RQ 4x120VDC-230VAC/5A CO HA Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic 6DL2804-1 Series Montageanleitung

Siemens

Siemens FDCIO181-1 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Technisches Dokument

Siemens

Siemens Simatic 6DL2804-0 Series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200R Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200M Bedienungsanleitung

Siemens

Siemens UP 220 Service-Handbuch

Siemens

Siemens FDCIO422 Service-Handbuch

Siemens

Siemens SIMATIC S7 EIP-200S Benutzerhandbuch

Siemens

Siemens SIMATIC 505 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200iSP Bedienungsanleitung

Siemens

Siemens 6ES7134-4NB01-0AB0 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung