Siemens SICAM A8000 Series Bedienungsanleitung

DC8-012-2.06 Unrestricted

SICAM A8000 Series

SICAM I/O Modules

Manual

Preface

Table of Contents

Open Source Software

Introduction

Standard I/O Modules

Siemens AG Unrestricted Order no.: DC8-012-2.06

Energy Automation

Humboldtstraße 59

90459 Nürnberg

Germany

Note

Please observe Notes and Warnings for your own safety in the Preface.

Disclaimer of Liability

Although we have carefully checked the contents of this publication

for conformity with the hardware and software described, we cannot

guarantee complete conformity s

ince errors cannot be excluded.

The information provided in

this manual is checked at regular

intervals and any corrections that might become necessary are

included in the next releases. Any suggestions for improvement are

welcome.

Subject to change without prior notice.

Document Label:

SICRTUs-HBSICAMIOMODULE-ENG_V2.06

Issuing date:

2019-09-13

2019

The reproduction, transmission or use of this document or its

contents is not permitt

ed without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design,

are reserved.

SICAM A8000 Series, SICAM I/O Modules Unrestricted 3

DC8-012-2.06, Edition 09.2019

Preface

This document is applicable to the following product(s):

•CP-8000

•CP-8021

•CP-8022

Purpose of this manual

This manual describes the characteristics and functions of all SICAM input/output modules.

It contains:

•Functional Overviews

•Technical Data

•Interface Descriptions

•External Circuit Elements

Target Group

The document you are reading right now is addressed to sales engineers and users who are

in charge of the following engineering tasks:

•Evaluation of the module specifications

•Evaluation of quotation criteria, such as technical specifications

•Conceptual activities, as for example design and configuration

•Electrical installation

•Technical system maintenance and service, module handling

Recommendations for Third-Party Products

Siemens does neither receive liability nor warranty for recommendations which are given or

implied by this manual. For the correct and intended use of the respective product the

associated technical descriptions must be paid attention to in any case.

References to Third-Party Web Sites

Siemens is not responsible for the contents of third-party websites mentioned in this

document, as well as the correctness of the publications and links. For all product information

the respective manufacturer is responsible.

Preface

4Unrestricted SICAM A8000 Series, SICAM I/O Modules

DC8-012-2.06, Edition 09.2019

Placement in the Information Landscape

Document Item number

Common Functions Peripheral Elementes according to IEC 60870-5-101/104 DC0-011-2

SICAM A8000 Series – CP-8000, CP-8021, CP-8022 Manual DC8-023-2

You find current product information on our website: www.siemens.com/sicam.

Further Support

For more information, please contact our Customer Support Center:

Phone: +49 (0)180 524 70 00

Fax: +49 (0)180 524 24 71

(charges depending on provider)

e-mail: support.energy@siemens.com

The Siemens Power Academy offers a comprehensive program of professional training events

in the fields of power generation, distribution and transmission.

Main training centers are:

Nuremberg, Germany (Head Office)

Phone: +49 911 433 7415

Fax: +49 911 433 5482

power-academy.ptd@siemens.com

Vienna, Austria

Phone: +43 51707 31143

Fax: +43 51707 55243

power-academy.at@siemens.com

Schenectady, NY, USA

Phone: +1 518 395 5005

Fax: +1 518 346 2777

pti-edpro.ptd@siemens.com

Hebburn, United Kingdom

Phone: +44 1914 953449

Fax: +44 1914 953693

pti-training.stdl.uk@siemens.com

Preface

SICAM A8000 Series, SICAM I/O Modules Unrestricted 5

DC8-012-2.06, Edition 09.2019

Notes on Safety

This manual does not constitute a complete catalog of all safety measures required for

operating the equipment (module, device) in question because special operating conditions

might require additional measures. However, it does contain notes that must be adhered to for

your own personal safety and to avoid damage to property. These notes are highlighted with a

warning triangle and different keywords indicating different degrees of danger.

Danger

means that death, serious bodily injury or considerable property damage

will occur, if the appropriate

precautionary measures are not carried out.

Warning

means that death, serious bodily injury or considerable property damage

can occur, if the appropriate

precautionary measures are not carried out.

Caution

means that minor bodily injury or property damage could occur, if the appropriate precautionary measures

are not carried out.

Note

is important information about the product, the

handling of the product or the respective part of the

documentation, to which special attention is to be given.

Preface

6Unrestricted SICAM A8000 Series, SICAM I/O Modules

DC8-012-2.06, Edition 09.2019

Qualified Electrical Engineering Personnel

Qualified electrical engineering personnel may commission and operate the device described

in this document. Qualified electrical engineering personnel in the sense of this document are

people who can demonstrate up to date technical qualifications as electrical technicians

including safety and first aid training. These person may commission, isolate, ground and

label devices, systems and circuits according to the standards of safety engineering.

Use as Prescribed

The device may only be used for such applications as set out in the catalogs and the technical

description, and only in combination with third-party equipment recommended and approved

by Siemens.

Correct and safe operation of the product requires adequate transportation, storage,

installation and mounting in a control cabinet, as well as appropriate use and maintenance.

During operation of electrical equipment, it is unavoidable that certain parts of this equipment

will carry dangerous voltages. Severe injury or damage to property can occur if the

appropriate measures are not taken:

•Before making any connections, ground the equipment at the grounding terminal.

•Hazardous voltages can be present on all switching components connected to the power

supply.

•The device does not represent a safety-oriented application; it does not provide fault

protection. Any fault protection must be provided by protection relays or other suitable

means.

•Even after the supply voltage has been disconnected, hazardous voltages can still be

present in the equipment (capacitor storage).

•LED display does not ensure that the connectors are free of voltage.

•Equipment with current transformer circuits must not be operated while open.

•The limit values indicated in the manual must not be exceeded; that also applies to testing

and commissioning.

Danger

Consider obligatory the safety rules for the accomplishment of works at electrical plants:

1. Switch off electricity all

-pole and on all sides!

2. Ensure that electricity cannot be switched on again!

3. Double check that no

electrical current is flowing!

4. Discharge, ground, short circuit!

5. Cover or otherwise isolate components

that are still electrically active!

Preface

SICAM A8000 Series, SICAM I/O Modules Unrestricted 7

DC8-012-2.06, Edition 09.2019

Statement of Conformity

The product described conforms to the regulations of the following European Directives:

•

2014/30/EU

Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization

of the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU

L96, 29/03/2014, p. 79–106

•

2014/35/EU

Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization

of the laws of the Member States relating to the making available on the market of electrical

equipment designed for use within certain voltage

limits; Official Journal of the EU L96, 29/03/2014,

p. 357–374

•

2011/65/EU

Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use

of certain hazardous substances in electrical and electronic equipment; Official Journal of the EU

L174, 01/07/2011, p. 88-110

The conformity of the product with the above mentioned regulations is proven through the observance

of the following harmonized standards:

•

EN 60870-2-1:1996 for 2014/30/EU

•

EN 61010-1:2010 and EN 61010-2-201:2013 for 2014/35/EU; EN 61010-2-030:2010 (only AI-8510,

AI-8511, CM-8820)

•

EN 50581:2012 for 2011/65/EU

This declaration certifies the conformity with the specified directives, but is not an assurance of

characteristics in the sense of the product liability law.

The product is intended exclusively for use in an industrial environment.

Other Standards

UL 61010

-2-201 including UL 61010-1; UL 61010-2-030

CAN/CSA

-C22.2 No.61010-1, CAN/CSA-C22.2 No.61010-2-030 and

CAN/CSA

-C22.2 No.61010-2-201

The technical data of the product is approved in accordance with UL.

For more information

about the UL database, see: www.ul.com.

Select

Online Certifications Directory and enter E496940 as UL File Number.

IND. CONT. EQ.

E496940

Preface

8Unrestricted SICAM A8000 Series, SICAM I/O Modules

DC8-012-2.06, Edition 09.2019

Symbols used on the I/O Modules

Symbol

Description

Warning, risk of electric shock

Caution, risk of danger. The documentation

must be observed.

WEEE marking

Protection class II / protective insulation

Protection class III / extra-low voltage

CE conformity

UL conformity

Symbols used in Connection Diagrams

Symbol Description Symbol Description

Functional earth (FE)

Protective earth (PE)

SICAM A8000 Series, SICAM I/O Modules Unrestricted 9

DC8-012-2.06, Edition 09.2019

Open Source Software

This product contains, among other things, Open Source Software developed by third parties.

The Open Source Software used in this product and the license agreements concerning this

software can be found in the Readme_OSS. These Open Source Software files are protected

by copyright.

Your compliance with those license conditions will entitle you to use the Open Source

Software as foreseen in the relevant license. In the event of conflicts between Siemens

license conditions and the Open Source Software license conditions, the Open Source

Software conditions shall prevail with respect to the Open Source Software portions of the

software. The Open Source Software is licensed royalty-free.

Insofar as the applicable Open Source Software License Conditions provide for it you can

order the source code of the Open Source Software from your Siemens sales contact -

against payment of the shipping and handling charges - for a period of at least 3 years since

purchase of the Product.

We are liable for this product including the Open Source Software contained in it pursuant to

the license conditions applicable to the Product. Any liability for the Open Source Software

beyond the program flow intended for this product is explicitly excluded. Furthermore any

liability for defects resulting from modifications to the Open Source Software by you or third

parties is excluded. We do not provide any technical support for this Product if it has been

modified.

Open Source Software

10 Unrestricted SICAM A8000 Series, SICAM I/O Modules

DC8-012-2.06, Edition 09.2019

Andere Handbücher für SICAM A8000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens ION PROFIBUS DP SPY T001 Bedienungsanleitung

Siemens

Siemens Simantic ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens Binary Input N 260 Bedienungsanleitung

Siemens

Siemens N 262E11 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC TI505 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Technisches Dokument

Siemens

Siemens SIMATIC PM-E Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens FDCI181-1 Bedienungsanleitung

Siemens

Siemens SIMATIC IM151-1 STANDARD Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200iSP Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA2711-1CA00 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung