Siemens SIMATIC ET 200SP Bedienungsanleitung

SIMATIC

ET 200SP HA

Digital Input Module DI 16x24VDC

HA (6DL1131-6BH00-0PH1)

Manual

05/2017

A5E39265608-AA

Security information 1

Product overview 2

Wiring 3

Parameters 4

Displays and interrupts 5

Technical specifications 6

Drivers, parameters,

diagnostics messages and

address space A

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be

used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property

damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified

personnel are those who, based on their training and experience, are capable of identifying risks and avoiding

potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described.

Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in

this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E39265608-AA

Ⓟ 05/2017 Subject to change

Table of contents

1 Security information......................................................................................................................................5

2Product overview..........................................................................................................................................7

2.1 Properties of the I/O module DI 16x24VDC HA.......................................................................7

3Wiring.........................................................................................................................................................11

3.1 Terminal assignment of the I/O module DI 16x24VDC HA....................................................11

3.2 Schematic circuit diagram......................................................................................................13

4 Parameters.................................................................................................................................................15

4.1 Parameters of the I/O module DI 16x24VDC HA...................................................................15

4.2 Module/channel parameters...................................................................................................16

4.3 Explanation of the module/channel parameters.....................................................................18

5 Displays and interrupts...............................................................................................................................21

5.1 Status and error displays of the I/O module DI 16x24VDC HA..............................................21

5.2 Interrupts................................................................................................................................24

6 Technical specifications..............................................................................................................................25

A Drivers, parameters, diagnostics messages and address space...............................................................31

A.1 Concept of the driver and diagnostics blocks.........................................................................31

A.2 Parameter assignment...........................................................................................................33

A.3 Parameter assignment and structure of the module/channel parameters.............................35

A.4 Diagnostics messages and maintenance events...................................................................38

A.5 Hardware interrupts................................................................................................................40

A.6 Address space.......................................................................................................................41

A.7 Address space of the time stamping (accuracy 1 ms)...........................................................42

Index...........................................................................................................................................................43

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

Manual, 05/2017, A5E39265608-AA 3

Table of contents

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

4Manual, 05/2017, A5E39265608-AA

Security information 1

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines, and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines and

networks. Systems, machines and components should only be connected to the enterprise

network or the internet if and to the extent necessary and with appropriate security measures

(e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit:

http://www.siemens.com/industrialsecurity.

Siemens’ products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends to apply product updates as soon as available and to always

use the latest product versions. Use of product versions that are no longer supported, and

failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

http://www.siemens.com/industrialsecurity.

Validity of the documentation

This device manual describes the DI 16×24VDC HA I/O module with the article number

6DL1131-6BH00-0PH1.

It complements the system manual of the ET 200SP HA Distributed I/O System.

Functions that generally relate to the system are described in this manual.

The information in this device manual and the system/function manuals enables you to put the

ET 200SP HA into operation.

Appendices

The appendices provide information that is relevant for using the ET 200SP HA outside the

PCS 7 environment.

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

Manual, 05/2017, A5E39265608-AA 5

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product or on the section of the documentation to which particular attention

should be paid.

Security information

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

6Manual, 05/2017, A5E39265608-AA

Product overview 2

2.1 Properties of the I/O module DI 16x24VDC HA

View of the module

DIAG MT

8



UV b

DI b DI a

UV6

UV0

UV2

UV4

U V 7

UV1

UV3

UV5

UV a

UV6

UV0

UV2

UV4

U V 7

UV1

UV3

UV5 4

16x24 V DC

DI . 6

DI . 0

DI . 2

DI . 4

1P1

L+

24 VD C

1P2

2P1

L+

24 VD C

2P 2

MA X .10 A

.0 .1

V 1.0 .0

CC 01

PW R

6DL1131-6BH0 0-0PH1

X 2

DI .7

DI .1

DI . 3

DI . 5

DI a

DI.6

DI . 0

DI . 2

DI.4

DI .7

DI .1

DI . 3

DI . 5

DI b

2324

17 18

19 2 0

21 22

F0 F1

.2 . 3

F2 F3

.4 . 5

F4 F 5

.6 .7

F6 F 7

.0 .1

F0 F 1

.2 . 3

F2F3

.4 .5

F4 F5

.6 .7

F6 F 7

①Module type and designation ⑧Output disable switch

②LED for diagnostics ⑨Module type color coding

③LED for maintenance ⑩Product version

④2D matrix code ⑪Function status and firmware version

⑤Wiring diagram ⑫Color code for selection of the color-coded labels

⑥LEDs for channel status/channel

fault

⑬Serial number

⑦LED for supply voltage ⑭Article number

Figure 2-1 View of the DI 16×24VDC HA

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

Manual, 05/2017, A5E39265608-AA 7

Properties

The I/O module has the following technical properties:

● 16 digital inputs with the following properties that can be individually configured for each

channel

– Pulse stretching

– Diagnostics

– Input delay

– Hardware interrupts for positive and negative edges

● Sink input (PNP, active high)

● Module-specific configurable diagnostics for missing supply voltage L+

● Suitable for connecting switches and 2-wire sensors according to IEC 61131-2, types 1 and

The I/O module supports the following functions:

● Firmware update

● I&M identification data

● Parameter reassignment in RUN

● Value status QI

● IO redundancy

● Time stamping with 1 ms accuracy

● Output disable switch

You can configure the I/O module with HW Config and integrate it into your system.

Output disable switch

If you want to pull the I/O module in runtime, you have to press the output disable switch for

3 seconds for the I/O module to be deenergized.

When the output disable switch has been pressed for 3 seconds, the LED DIAG flashes red,

the LED MT lights up yellow and the I/O module generates a diagnostics message. See section

Status and error displays of the I/O module DI 16x24VDC HA (Page 21).

Note

Pressing the output disable switch interrupts any ongoing firmware update. A firmware update

cannot be performed when the device is deenergized.

Accessories

The following accessories must be ordered separately:

● Labeling strips

● Color-coded labels

Product overview

2.1 Properties of the I/O module DI 16x24VDC HA

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

8Manual, 05/2017, A5E39265608-AA

● Reference identification labels

● Shield connector

Product overview

2.1 Properties of the I/O module DI 16x24VDC HA

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

Manual, 05/2017, A5E39265608-AA 9

Product overview

2.1 Properties of the I/O module DI 16x24VDC HA

Digital Input Module DI 16x24VDC HA (6DL1131-6BH00-0PH1)

10 Manual, 05/2017, A5E39265608-AA

Andere Handbücher für SIMATIC ET 200SP

101

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMOTICS CONNECT 400 Bedienungsanleitung

Siemens

Siemens RXM21.1 Bedienungsanleitung

Siemens

Siemens 6ES7134-4NB01-0AB0 Bedienungsanleitung

Siemens

Siemens Simatic ET200pro Bedienungsanleitung

Siemens

Siemens SICAM A8000 Series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens APACS+ Handbuch

Siemens

Siemens Simatic ET200pro Bedienungsanleitung

Siemens

Siemens FDCI222 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens Simantic ET200SP Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200C Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200eco Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200eco Bedienungsanleitung

Siemens

Siemens SIMATIC TI505 Bedienungsanleitung

Siemens

Siemens TX-I/O Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200M Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens FDCI222 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung