Siemens MAMMOMAT 1000 Nova Bedienungsanleitung

MAMMOMAT 1000/3000 Nova - Opdimar

English

Print No.: SPB7-230.812.06.01.02 Doc. Gen. Date: 03.03

Replaces: n.a. 66 53 914

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

Installation

Settings for LCD monitor (SCD 1897 TFT)

Installation Instructions

Opdima® SPB7-230.812.06 Page 2 of 4 Siemens-Elema AB

Installation Rev. 01 03.03 SPS-UD Solna, Sweden

0 - 2 Revision

Document revision level

The document corresponds to the version/revision level effective at the time of system delivery. Revi-

sions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified personnel

who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or

one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho-

rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or

one of its affiliates before attempting installation or service procedures.

Chapter Page Revision

All All 01

Contents 0 - 3

Siemens-Elema AB SPB7-230.812.06 Page 3 of 4 Opdima®

Solna, Sweden Rev. 01 03.03 SPS-UD Installation

1 _______General_______________________________________________________1 - 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 1

Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

2 _______ASW 2.1 ______________________________________________________2 - 1

Adjusting resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Adjusting image geometry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

3 _______ASW 3.1 ______________________________________________________3 - 1

Adjusting resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Adjusting image geometry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Page

0 - 4 Contents

Opdima® SPB7-230.812.06 Page 4 of 4 Siemens-Elema AB

Installation Rev. 01 03.03 SPS-UD Solna, Sweden

This page intentionally left blank.

1 - 1

Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima®

Solna, Sweden Rev. 01 03.03 SPS-UD Installation

General 1

Introduction 1

These instructions describe how to adjust the resolution and the image geometry of

LCD monitor SCD 1897 TFT.

For acquisition workstation software version ASW 2.1, follow the instructions in chapter 2.

For software version ASW 3.1, follow the instructions in chapter 3.

Prerequisites 1

The monitor should be installed according to chapter "Installation of monitor" in document

Installation and Start-Up Instructions (SPB7-230.033.13...).

Time required 1

Approximately 1/2 hour for one CSE.

Opdima® SPB7-230.812.06 Page 2 of 2 Siemens-Elema AB

Installation Rev. 01 03.03 SPS-UD Solna, Sweden

1 - 2 General

This page intentionally left blank.

2 - 1

Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima®

Solna, Sweden Rev. 01 03.03 SPS-UD Installation

ASW 2.1 2

Adjusting resolution 2

1. Loginas Service.

2. PressCtrl+Alt+Shift+!

3. Themessage"Switchtodefaultbehaviour?"appears,clickon OK.

4. Rightclick on thescreen backgroundandselect"Newwindow".

5. Dependingon which computer isused,type the followingin thextermwindow:

Ultra1: type/usr/sbin/ffbconfig -res 1280x1024x67 andpressenter.

Ultra10: type/usr/sbin/ffbconfig -res 1280x1024x85 andpressenter.

6. Ifthemessage"Cannotverifythatthisisasupportedresolution..."appears,typey

andpressenter.

7. Typeexit and pressenter toclose thexterm window.

8. Logout.

Adjusting image geometry 2

1. Loginas Service.

2. Maximizethe Mode Selectionwindow by clickingon the upperrightcorner.

3. Press theMenu button on theright side ofthe monitor.A menu forscreensettings

isopened.

4. SelectAuto (usethe menu buttontomoveinthe menu).

5. OpentheAutosub menu by pressing thebuttonwith an"up"arrow on the right

sideof the monitor.

6. SelectAuto choosesource(usethemenubuttonto move in the menu)and then

pressthe "up"arrowbutton to activate.

7. Checkthatthe size ofthe Mode Selectionwindowcorrespondswiththe active

areaofthe screen.

8. PresstheMenubuttononthe rightsideofthemonitor toopen themenuforscreen

settings.

9. SelectOthers (usethemenu button tomovein the menu) and then pressthe "up"

arrowbutton toactivate.

10. SelectStatus(usethemenu button tomoveinthe menu) and thenpressthe "up"

arrowbutton toactivate.

11. Checkthatthe settingsareaccordingtothe table below:

*anyvalue

12. Minimizethe Mode Selectionwindow by clickingthe upper rightcorneragain.

Horisontal Vertical

Resolution 1280 1024

Frequency * 85 Hz

Opdima® SPB7-230.812.06 Page 2 of 2 Siemens-Elema AB

Installation Rev. 01 03.03 SPS-UD Solna, Sweden

2 - 2 ASW 2.1

13. Logout.

3 - 1

Siemens-Elema AB SPB7-230.812.06 Page 1 of 2 Opdima®

Solna, Sweden Rev. 01 03.03 SPS-UD Installation

ASW 3.1 3

Adjusting resolution 3

1. Loginas Service.

2. InModeSelectionwindow,clickonService.

3. InServicewindow, clickon Advanced Service.

4. Select 3(SoftwareUpgrade) from the SERVICESmenu and pressenter.

5. Select6 (Miscellaneous)from theSOFTWAREUPGRADE menu and pressenter.

6. Select5 (Selectmonitor type)fromthe MISCELLANEOUS menu and press enter.

7. EnterRefresh rate:85

8. SelectApply and pressenter.

9. Amessagethatthe refreshrate has beenset appears.Close theAdvanced

Servicewindow.

10. Closethe MISCELLANEOUS menu.

11. Closethe SOFTWAREUPGRADEmenu.

12. Closethe SERVICES menu.

13. Closethe Service window.

14. Logout.

Adjusting image geometry 3

1. Loginas Service.

2. Maximizethe Mode Selectionwindow by clickingon the upperrightcorner.

3. Press theMenu button on theright side ofthe monitor.A menu forscreensettings

isopened.

4. SelectAuto (usethe menu buttontomoveinthe menu).

5. OpentheAutosub menu by pressing thebuttonwith an"up"arrow on the right

sideof the monitor.

6. SelectAuto choosesource(usethemenubuttonto move in the menu)and then

pressthe "up"arrowbutton to activate.

7. Checkthatthe size ofthe Mode Selectionwindowcorrespondswiththe active

areaofthe screen.

8. PresstheMenubuttononthe rightsideofthemonitor toopen themenuforscreen

settings.

9. SelectOthers (usethemenu button tomovein the menu) and then pressthe "up"

arrowbutton toactivate.

10. SelectStatus(usethemenu button tomoveinthe menu) and thenpressthe "up"

arrowbutton toactivate.

Opdima® SPB7-230.812.06 Page 2 of 2 Siemens-Elema AB

Installation Rev. 01 03.03 SPS-UD Solna, Sweden

3 - 2 ASW 3.1

11. Checkthat thesettingsare accordingto the tablebelow:

*anyvalue

12. Minimizethe Mode Selectionwindowby clickingtheupper rightcorner again.

13. Logout.

Horisontal Vertical

Resolution 1280 1024

Frequency * 85 Hz

Andere Handbücher für MAMMOMAT 1000 Nova

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens MULTIMOBIL 5C Bedienungsanleitung

Siemens

Siemens POWERMOBIL Gebrauchsanweisung

Siemens

Siemens SIREMOBIL Compact Gebrauchsanweisung

Siemens

Siemens ADVIA 2400 Handbuch

Siemens

Siemens Drager medical Apollo SW 4.n Betriebsanleitung

Siemens

Siemens MAMMOMAT 300 Gebrauchs- und Pflegehandbuch

Siemens

Siemens MULTI-ECHO EPI 4A21 Bedienungsanleitung

Siemens

Siemens Healthineers UniPOC RAPIDPoint 500 Bedienungsanleitung

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens 25 Bedienungsanleitung

Siemens

Siemens ARCADIS Orbic Bedienungsanleitung

Siemens

Siemens MTCO 1324 Bedienungsanleitung

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens ACUSON P10 Stücklistenhandbuch

Siemens

Siemens ACUSON Sequoia Gebrauchs- und Pflegehandbuch

Siemens

Siemens HearCheck Screener Bedienungsanleitung

Siemens

Siemens MAGNETOM syngo MR D11 Bedienungsanleitung

Siemens

Siemens SOMATOM Sensation 16 Benutzerhandbuch

Siemens

Siemens MAMMOMAT Balance Bedienungsanleitung

Siemens

Siemens ACUSON Cypress Bedienungsanleitung

Siemens

Siemens MAGNETOM Aera Bedienungsanleitung

Siemens

Siemens MAMMOMAT Novation SP Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung