Siemens POWERMOBIL Gebrauchsanweisung

POWERMOBIL/ARCOSKOP

English

Print No.: SPR2-240.814.04.02.02 Doc. Gen. Date: 07.00

Replaces: SPR2-240.814.04.01.02

The reproduction, transmission or use

of this document or its contents is not

permitted without express written

authority. Offenders will be liable for

damages. All rights, including rights

created by patent grant or registration

of a utility model _or_design,_are_

reserved.

Installation- and Setting Instructions

Area dose product measurement device

POWERMOBIL/ARCOSKOP SPR2-240.814.04 Page 2 of 10 Siemens AG

Rev. 02 07.00 TD SD 24 Medical Engineering

Area dose product measurement device1

Safety information 1

When performing service work and tests, adhere to the general safety instructions, print

number RA0-000.12.40 contained in Register 1 of the system binder, the product-specific

safety information in the POWERMOBIL respectively ARCOSKOP as well as the safety

information in the ARTD. After completing all service work and reattaching the covers,

perform the protective conductor measurement as specified in ARTD-002.731.17.

Documents required 1

POWERMOBIL respectively ARCOSKOP system binder including the general safety

information and the service instructions.

If there is a laser targeting device: Setting and adjustment instructions for the Laser

Targeting Device.

Parts required 1

Measurement and auxiliary devices required 1

Tools required 1

Standard service kit (refer to ARTD, Part 3)

1 set of Allen keys

Installation kit: Area dose product measurement device

Service PC

Service PC-Host interface cable 99 00 440 RE999

POWERMOBIL resp. ARCOSKOP

Protective conductor test meter 44 15 899 RV090

Bender Safety tester

PTW-DALI dose measurement device (no longer listed in the ARTD)

PTW-NOMEX dose measurement device 97 08 637 Y0388

PTW-DIADOS dose measurement device 97 17 612 Y0388

Center cross 96 60 051 RE999

Area dose product measurement device 3

Siemens AG SPR2-240.814.04 Page 3 of 10 POWERMOBIL/ARCOSKOP

Medical Engineering Rev. 02 07.00 TD SD 24

Installation 1

•DisconnectthePOWERMOBILrespectivelyARCOSKOPfromthemainspower.

•RemovethePOWERPHOS cover.

Without the laser targeting device: 1

•Attach the Areadose productmeasurement device tothe POWERPHOS using the

screwsincludedinthepackaging.

•ConnecttheinterfacecablealreadyintegratedinthecableharnesstotheAreadose

productmeasurementdeviceandlockitinplace.

•ReattachthePOWERPHOScover.

With the laser targeting device: 1

•RemovethelasertargetingdevicefromthePOWERPHOSbyremovingthescrews.

•MounttheAreadoseproductmeasurementdevicetothePOWERPHOS.

•Reattachthelasertargetingdevice.

•ConnecttheinterfacecablealreadyintegratedinthecableharnesstotheAreadose

productmeasurementdeviceandlockitinplace.

•Checkthelasertargetingdeviceaccordingtotheadjustmentinstructionsand,

ifnecessary,adjustit.

•Reattachthe POWERPHOS cover.

POWERMOBIL/ARCOSKOP SPR2-240.814.04 Page 4 of 10 Siemens AG

Rev. 02 07.00 TD SD 24 Medical Engineering

4 Area dose product measurement device

Memoskop Programming 1

•Turn on the POWERMOBIL/ARCOSKOP and wait for the start-up.

•Insertthe Memoskop parameter disk (seeSystem folderRegister 10)in drive A ofthe

servicePC.

•Startthe Memoskop serviceprogram.

•Clickthe"GetfromMemoskop"buttoninthemainmenu.Theparametersaretransferred

fromthe Memoskop to theServicePC.

•Selectthe "Others"menu.

•Select"Disabledose displayselection inUserSet Up". The Checkbuttonis not marked.

•Select"Storageofdose on disk".TheCheckbutton is marked.

•Click onthe "Back"button. The "Others" window closes.

•Selectthe "HardcopySetup"menu.

•Select"Dose on Hardcopyoutput".TheCheckbuttonis marked.

•Clickon the "Back" button.The"HardcopySetup" window closes.

•Clickon the "Put toMemoskop"button in themainmenu. The parametersare

transferredfromthe servicePCtothe Memoskop and saved.

•Selectthe "File"menu.

•Selectthe sub-menu"Save"and save the parameterson disk.

•Exit the Memoskop service program.

•Turn the POWERMOBIL/ARCOSKOP offand the on againto reset the serial interface.

After selecting the "Disable dose display selection in User Set Up"

parameter, the "Storage of dose on disk" and "Dose on hardcopy output"

parameters become available in the Memoskop User Setup and visible to

the customer.

NOTICE

Area dose product measurement device 5

Siemens AG SPR2-240.814.04 Page 5 of 10 POWERMOBIL/ARCOSKOP

Medical Engineering Rev. 02 07.00 TD SD 24

Calibrating the area dose product measuring device 1

CONSTANT parameters = Tw1

•Readandrecordthe Tw valueshownontheelectronicsunit of the areadoseproduct

measuringdevice.

Programming 1

•Connectthe servicePCtotheserial interfaceof the POWERMOBIL/ ARCOSKOP.

•Startthe serviceprogram.

•Selectthe "Adjustment,Parameter..."menu.

•Select"Diamentor"inthe"ParameterGroups"combo box.

•Clickon"Getfrom Unit".

•The parameter "1. Diamentor Existing" mustbe on YES.

•Selectparameter "2.ConstantTw.

•Enterthe parameterTwin the "Value Actual:"field.

•Clickon"SetValue".

•Clickon "Put toUnit".

•Clickon "Save to File".

Fig. 1

This adjustment is used to calibrate the area dose product mea-

suring device to the POWERMOBIL/ ARCOSKOP display.

You must exit the service program with "Logoff" and "Quit" in

order to save the modified parameters to diskette as a new file.

Potentiometer

NOTICE

POWERMOBIL/ARCOSKOP SPR2-240.814.04 Page 6 of 10 Siemens AG

Rev. 02 07.00 TD SD 24 Medical Engineering

6 Area dose product measurement device

Checking the programmed value 1

Prerequisites

•TheTwvalueisalreadyprogrammed (seeProgramming).

•Connectthe servicePCtothe serial interfaceofthePOWERMOBIL/ARCOSKOP.

•Startthe serviceprogram.Selectthe"Adjustment,Calibrations..."menu.

•Answerthequery with "Yes".

•Select"Diamentor"in the "FunctionGroup:"combo box.

•Inthe"AvailableFunctions" windowselectthe line"StartDiamentorTest" and clickon

"Execute".

•Pressthe >0< key(resetkey forfluoroscopytime).The currentvalue is displayedon the

monitor.

•ThetestedTw value is displayed on themonitor of the POWERMOBIL/ARCOSKOP.

•Thisvalue mustmatch theprogrammedCONSTANTparameterTw.Tolerance:±5%.

•Ifthe ->0<- keyispressed (resetkey for fluoroscopictime)the testis repeatedand is

displayedagainon the monitor.

•Thepotentiometer(Fig.2) ofthearea dose productmeasuring devicecanbeusedto

adjustthe testvalueTwto the programmedvalueTw.

•Afterthe adjustment,select "StopDiamentor Test"ontheservice PC and clickon

"Execute".

•Thetestis concluded.

•Checktheaccuracy ofthearea dose productmeasuringdevice (seenextpage).

Fig. 2

Checking the programmed values will activate the self-test in the

electronics unit of the area dose product measuring device.

This serves to recalibrate the electronics unit.

Potentiometer

NOTICE

Area dose product measurement device 7

Siemens AG SPR2-240.814.04 Page 7 of 10 POWERMOBIL/ARCOSKOP

Medical Engineering Rev. 02 07.00 TD SD 24

Checking the accuracy of the area dose product measuring

device 1

Prerequisites 1

The calibration of the measuring device must already have been performed.

The X-iris is correctly set; the collimator blades are still just visible on the monitor screen.

Preparations 1

•Attachthe centeringcross inthecenterof theI.I.(Fig.3).

•Selectzoom format.

•SelectkV-mA-curve plateauIOD.

•Releasefluoroscopybriefly,adjustingtheX-Iris on theradiationfieldto a formatof

around 15cm diameter.

•Do notmakeanyfurtheradjustmentsto the X-Iris.

•Recordtheinner diameter(keywidth,Fig.5) of the octagonalarea of theradiationfield.

•Removethe centeringcross.

•Attachthe small(1cm3)dosemeasuringchamberinthe centeroftheI.I.(Fig.4).

Dose measurement 1

•Pressthe"Next Pat" keyto reset the areadoseproductdisplayon the POWERMOBIL/

ARCOSKOP monitor to0.

•Select kV STOP and set70 kV.

•Resetthedose measuringdevice(Dali,Nomex...)to0.

•Release fluoroscopy forapprox. 20 seconds (~ 3mGy).The measured dose KEshould

behighenough that theselectedmeasurementrangeof thedose measuringdevice

(Dali,Nomex...)isfullyutilized;ifnecessary,resetthe areadoseproductdisplayon the

POWERMOBIL/ ARCOSKOP and the dose measuringdeviceand repeat the

measurementwith a differentfluoroscopictime.SelectkV-Stopagain and set 70 kV.

•Recordthemeasured dose KE.

•Recordthearea dose productdisplayedon the POWERMOBIL/ ARCOSKOP (FDPa).

Calculating the area dose product 1

•Tocalculatethe measuredareadoseproduct:(measuredarea doseproductFDPg) =

(measureddose KE)*(innerdiameterd)2 *0.829.

The radiation field must cover the entire area of the dose measur-

ing chamber. If necessary, center the dose measuring chamber on

the II again.

NOTICE

POWERMOBIL/ARCOSKOP SPR2-240.814.04 Page 8 of 10 Siemens AG

Rev. 02 07.00 TD SD 24 Medical Engineering

8 Area dose product measurement device

Evaluation 1

Calculate the deviation between the measured area dose product and the displayed area

dose product:

The deviation must be < 0.3.

Deviation = [(displayed area dose product FDPa) - (measured area dose product FDPg)] /

(measured area dose product FDPg).

Fig. 3 Fig. 4

Fig. 5

Measuring chamber

POWERPHOS

RBV / I.I.

Centering cross

POWERPHOS

RBV / I.I.

Area dose product measurement device 9

Siemens AG SPR2-240.814.04 Page 9 of 10 POWERMOBIL/ARCOSKOP

Medical Engineering Rev. 02 07.00 TD SD 24

Concluding steps 1

•Reinstall all the covers.

•Performthe protectiveconductor measurementas specifiedin ARTD-002.731.17.

•Performpartialacceptancetestsincompliancewithcountry-specificregulations.

Changes to previous version 1

Page 4 new

POWERMOBIL/ARCOSKOP SPR2-240.814.04 Page 10 of 10 Siemens AG

Rev. 02 07.00 TD SD 24 Medical Engineering

10 Area dose product measurement device

This page intentionally left blank.

Andere Handbücher für POWERMOBIL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens SOMATOM Emotion syngo CT 2007E Bedienungsanleitung

Siemens

Siemens SOMATOM Sensation 16 Bedienungsanleitung

Siemens

Siemens ARCOSKOP Bedienungs- und Wartungsanleitung

Siemens

Siemens MOBILETT Plus Betriebsanleitung

Siemens

Siemens VIDEOMED DI Einrichtungshandbuch

Siemens

Siemens syngo MR E11 Bedienungsanleitung

Siemens

Siemens ARCADIS Varic Leitfaden

Siemens

Siemens MULTIMOBIL 10 Bedienungsanleitung

Siemens

Siemens MAMMOMAT 3000 Modular Bedienungsanleitung

Siemens

Siemens ACUSON X300 Bedienungsanleitung

Siemens

Siemens SIRECUST 1280 Bedienungsanleitung

Siemens

Siemens acuson Sequoia Installationsanleitung

Siemens

Siemens ARCADIS Avantic Bedienungs- und Wartungsanleitung

Siemens

Siemens MAGNETOM Aera Bedienungsanleitung

Siemens

Siemens SIREMOBIL Compact Betriebsanleitung

Siemens

Siemens Drager medical Carina Bedienungsanleitung

Siemens

Siemens ACUSON S Series Bedienungsanleitung

Siemens

Siemens SIREMOBIL Bedienungsanleitung

Siemens

Siemens Immulite Homocysteine 2000 Bedienungsanleitung

Siemens

Siemens SOMATOM Sensation 16 Benutzerhandbuch

Siemens

Siemens SOMATOM Spirit Bedienungsanleitung

Siemens

Siemens ACUSON Freestyle Bedienungsanleitung

Siemens

Siemens ARCADIS Varic Installationshandbuch

Siemens

Siemens MAMMOMAT Balance Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung