Siemens MAMMOMAT 1000 Bedienungs- und Wartungsanleitung

MAMMOMAT 1000/3000/3000 Nova - Opdimar

Print No.: SPB7-230.101.03.04.02 Doc. Gen. Date: 07.03

Replaces: SPB7-230.101.03.03.02

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

The maintenance protocol

SPB7-230.105.03.04.02

is required for this instruction

Maintenance Instructions

(66 47 460)

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 4 Siemens AG

Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions

0 - 2 Revision

Document revision level 0

The document corresponds to the version/revision level effective at the time of system delivery. Revi-

sions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer 0

The installation and service of equipment described herein is to be performed by qualified personnel

who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or

one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho-

rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or

one of its affiliates before attempting installation or service procedures.

Chapter Page Revision

All All 04

Contents 0 - 3

Siemens AG Register 8 SPB7-230.101.03 Page 3 of 4 Opdimar

Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions

Document revision level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1 _______General information ____________________________________________ 1 - 1

Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

Required documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Required tools, measurement and auxiliary devices . . . . . . . . . . . . . . . . . 1 - 1

Text emphasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Safety Information and Preventive Measures . . . . . . . . . . . . . . . . . . . . . 1 - 2

2 _______System Status _________________________________________________ 2 - 1

Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

3 _______System _______________________________________________________ 3 - 1

Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

4 _______Testing _______________________________________________________ 4 - 1

Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Calibrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

5 _______Miscellaneous _________________________________________________ 5 - 1

Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Final tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Page

0 - 4 Contents

OpdimarRegister 8 SPB7-230.101.03 Page 4 of 4 Siemens AG

Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions

This page intentionally left blank.

General information 1 - 1

Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar

Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions

1 General information

1.1 Training

•Training workshop or at least 1 installation

1.2 Required documents

1.3 Required tools, measurement and auxiliary devices

•Protective ground wire tester (44 15 899 RV090)

•Stereo calibration phantom (included in the Opdimardelivery) (part No. 64 30 701)

•Acrylic plastic (PMMA = Poly-methyl-met-acrylate) plates:

3 plates of AEC calibration plexiglas 150 mm x 150 mm x19 mm (part No. 65 61 232) and

one plate calibration plexiglas, 150 mm x 150 mm x 9,7 mm (part No. 65 61 224)

•Grid object table

•Mammography bar pattern (5-20 lp/mm),

for instance Nuclear Associates Resolution Test Pattern (07-555), http://www.nucl.com

•Cleaning agents* specified in

Instructions for Use MAMMOMAT 1000/3000 Nova

chapter

Cleaning, Disinfection

•Standard service tools*

•Instructions for Use MAMMOMAT 1000/3000 Nova SPB7-230.201...

•Supplement to the Instructions for Use MAMMOMAT 3000-

Opdimar

(Included in the Opdimardelivery)

SPB7-230.203.13...

•MAMMOMAT 1000/ 3000/ 3000 Nova - Opdimar

Service Instructions

(Included in the Opdimardelivery)

SPB7-230.061.11 ...

All tools, measurement and auxiliary devices listed, with the

exception of those marked with " * ", are specified in the STC

(Service Tools Catalogue).

NOTICE

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG

Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions

1 - 2 General information

1.4 Text emphasis

1.5 Safety Information and Preventive Measures

"WARNINGS" are information provided with special emphasis

when there is the potential for personal injury to the operator or

patient.

"CAUTIONs"

are information provided with special emphasis

when there is the potential for damage to the equipment.

"NOTICEs" are information provided with special emphasis to

facilitate proper use of the equipment or proper execution of a

procedure

•When completing repair work and tests, please note:

-the product-specific safety information in the document

-the safety information in RA0-000.012.40...

•Tests or adjustments that must be made with radiation are

identified with the radiation warning symbol .

During these types of adjustments, radiation protective clothing

must be worn.

WARNING

CAUTION

NOTICE

CAUTION

System Status 2 - 1

Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar

Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions

2 System Status

2.1 Checks

Check the system status and fill in the Maintenance Protocol.

•Check the serial No. and the part No. for the workstation, the CCD camera and the

biopsy controller.

•Check the licence key (Dicom option).

•For instructions how to check the hostname/hostid see

Service Instructions for

Opdima

, chapter

Instruction for obtaining the systems host ID and hostname

•Document country settings in the Maintenance Protocol.

•If applicable, document network and printer parameters in the Maintenance Protocol.

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG

Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions

2 - 2 System Status

This page intentionally left blank.

System 3 - 1

Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar

Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions

3System

3.1 Checks

PMP MO storage media and MO unit

The MO disks shall be handled with care. They shall never be forced into or out of the

drive. They shall not be exposed to heat or fluids. Never put heavy objects on an MO disk.

The MO drive unit is relatively sensitive to dust.

•Check that the unit is installed in a clean environment and is not exposed to dust.

•Check that right MO media is used. Only Sony standard media

(Siemens part No. 66 33 734, Sony RMO-S561, 9.1 GB rewritable)

shall be used as MO media.

•Check that the MO disks are stored in a clean and safe place.

•Check that the local disks and backup disks are properly labeled.

•Check that backup disks are stored separately.

•The MO disks used in the Opdimarsystem are equipped with an mechanical write

protection lock. This lock shall NEVER be used since the Opdimarsystem always

attempts to mount the MO disk as a read/write device.

OPD00609

Fig. 1 Write protection lock not activated

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG

Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions

3 - 2 System

PMP Scsi cables, cd-rom

It is important to check that the SCSI cables are properly connected and the hardware is

right terminated. If not, this might generate a lot of problems e.g. failure to write images to

MO disk, corrupted MO disk, corrupted hard disk.

•Make sure the SCSI cabling is properly connected, and fixed, to the units and that the

cable is not bent too much just behind the MO.

•The MO drive shall be terminated with the external termination plug.

If the system not have been able to store images on the MO disk due to above problem, it

will take longer to save images when the system can save.

PMP Cables general

•Check connectors and cables between biopsy controller and CCD camera.

•Check connectors and cables between biopsy controller and workstation.

•Check that all cables are free from damages, especially monitor cables.

•Check that connectors are properly fixed.

SW Disk cache settings

For instructions how to check the disk cache settings see

Service Instructions for

Opdima

, chapter

Disk cache settings

SI Biopsy unit

This unit contains the following safety-relevant parts, which should be checked every year

and, if required, replaced:

•Biopsy unit connectors (25 pin DSUB connector and 9-pin object table connector). Visual

inspection.

•Sliding pads on the underside of the biopsy unit object table. Check that the sliding pads

are free from visual damages and that the biopsy unit object table runs smoothly on the

base plate.

•Check that the biopsy unit is safely locked to the MAMMOMAT.

It is important not to interrupt the system when it is saving

images on the MO disk, the MO disk can be destroyed.

CAUTION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens SONOLINE G40 Bedienungsanleitung

Siemens

Siemens MULTIMOBIL 10 Bedienungsanleitung

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens Sonoline G20 Bedienungs- und Wartungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Bedienungsanleitung

Siemens

Siemens MULTIMOBIL 10 Bedienungsanleitung

Siemens

Siemens POWERMOBIL Gebrauchsanweisung

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens MAMMOMAT Inspiration Gebrauchs- und Wartungshandbuch

Siemens

Siemens MOBILETT Plus Betriebsanleitung

Siemens

Siemens ACUSON NX3 series Bedienungsanleitung

Siemens

Siemens MOBILETT XP Bedienungsanleitung

Siemens

Siemens MAMMOMAT 1000 Nova Benutzerhandbuch

Siemens

Siemens SOMATOM Spirit Bedienungsanleitung

Siemens

Siemens ACUSON Freestyle Bedienungsanleitung

Siemens

Siemens Servo Screen 390 Bedienungsanleitung

Siemens

Siemens ACUSON P300 Bedienungsanleitung

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Siemens

Siemens ADVIA 2120 Handbuch

Siemens

Siemens MODULARIS Uro Plus Montageanleitung

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens ACUSON S Series Bedienungsanleitung

Siemens

Siemens ACUSON Sequoia Gebrauchs- und Pflegehandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung