Siemens Sonoline G20 Bedienungsanleitung

Medical G20 Quick Reference

Page 1

Medical G20 Quick Reference

Page 2

Note: The term select is used to describe the action of rolling the trackball to position the pointer (cursor) on an object and then

pressing SET on the control panel.

Beginning an Exam



Press the Power Switch on the upper left side of the keyboard. A blue light will indicate the power is on.

To enter data for a new patient:

1. Press NEW PATIENT (F1)

2. Enter the patient name and ID using the keyboard

3. Enter other pertinent information

4. Use TAB to move to next data field

5. Use TRACKBALL and cursor to select OK

6. If exam is not the Boot Up exam, press Exam to select the correct Quickset

7. Quicksets can also be recalled using EXAM key (F5) on keyboard

Optimizing the 2-D Image

To adjust… Do this:

One Touch Gain Optimization Press TGO (option) button

More Penetration Push MULTIHERTZ toggle down

Clean out noise/clutter Push MULTIHETTZ toggle up to THI

Overall Gain/brightness Rotate 2-D knob

Depth Rotate DEPTH/ZOOM knob

Focus Push FOCUS toggle up or down

Zoom Press DEPTH/ZOOM knob to select

Gain Adjust DGC sliders

Bright Light Scanning Use Gray Map D or L

To Rotate or Flip Image L/R



To change image orientation from left to right

To rotate the image 90°



Press the L/R FLIP key on the control panel

Press L/R FLIP key while pressing and holding the SHIFT

key on the keyboard.

Medical G20 Quick Reference

Page 3

Adding Text to an Image

To type text:

1. Obtain an image, press Freeze

2. Press the TEXT key

3. Place green text cursor where you would like text

displayed

4. Enter text

To Use Pre Programmed Text

1. Press TEXT

2. Press MENU

3. Use TRACKBALL to select the desired text from menu

list

4. Press SET

Removing Text from an Image



Pressing TEXT, then ESCAPE will remove text on a frozen image

Pressing DELETE TEXT on keyboard will allow all text to be deleted

Pressing DELETE LINE on Keyboard will delete text in the same line

Selecting Multiple Gestations

To Indicate Multiple Gestations:

1. Press CALIPER key

2. Roll TRACKBALL to top of Measurement menu to higlight SINGLE

3. Press SET

4. Select Single or Multiple from prompt box

5. Use TRACKBALL to select OK

6. Press SET

Medical G20 Quick Reference

Page 4

Obtaining OB Calculations

Standard Fetal Measurements:

1. Press CALIPER key

2. Use TRACKBALL to select measurement from on-screen menu

3. Press SET

4. Place first caliper

5. Press SET

6. Place subsequent caliper(s)

7. Press Set

Measurement will be displayed on screen and transferred to Worksheet

Measure Heart Rate with M- Mode:

1. Press M key and obtain M-Mode sweep. Freeze sweep

2. Roll TRACKBALL to select HR from measurement. Press SET

3. Roll TRACKBALL to place measurement marker at the beginning of the cardiac cycle. Press SET

4. Roll TRACKBALL to place second measurement marker at the end of the cardiac cycle. Press SET

5. Heart rate will be diplayed on screen and transferred to Worksheet

Measure AFI using 4B

1. Press 4B on control panel

2. Obtain first quadrant image

3. Press Freeze

4. Repeat process until 4 quadrant images have been

obtained

5. Press 4B to cycle through images as needed

6. Press CALIPER

7. Roll TRACKBALL to select AFI from measurement

8. Press SET

9. Place first measurement marker and press SET

10. Place second measurement marker and press SET

11. Repeat this process in each quandrant

12. AFI will be displayed on screen and transferred to

Worskheet

Editing Measurements in the Worksheet

1. Display Worksheet by highlighting Worksheet in the Measurement Menu and press SET

2. Roll trackball to value to be deleted/edited and press SET

3. Use the keyboard to delete or edit value

4. Press ENTER. The system updates the value

Medical G20 Quick Reference

Page 5

Reviewing and Selecting Images/Studies on DIMAQ

Press REVIEW on the control panel

To Select

An image on Image Screen

A study on Study Screen

Multiple non-consecutive studies

Multiple consecutive studies

Do this:

Using TRACKBALL position cursor on image and press

SET key

Position cursor on study and press SET

Position cursor and hold Ctrl key for additional studies.

Press SET key

Select a single study. Place cursor on last desired study.

Press SHIFT key and SET

Transfer Cases to CD

Press REVIEW on the Control panel to activate Study Screen

1. Trackball to desired study and highlight (will appear blue)

2. Insert Blank CD or rewriteable with your cases on it

3. Press EXPORT to CD

4. Wait until highlighted case turns “ blue”

5. CD will pop out briefly and reinsert prior to turning “Blue”

6. Press CD on the study screen to check if case has successfully loaded

7. Press EJECT on Study Screen or at the CD loader to eject

8. Press SELECT or Live Screen to Resume Scanning

Powering off system

Turn off system by pressing blue power switch located on the

1. Turn off system by pressing blue power button on the left front of the control panel

2. Wait under monitor goes black before removing power cord from wall

Andere Handbücher für Sonoline G20

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Siemens

Siemens MODULARIS Uro Plus Montageanleitung

Siemens

Siemens MAMMOMAT 300 Anleitungen und Rezepte

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens AXIOM Iconos R200 Bedienungsanleitung

Siemens

Siemens ARCADIS Orbic Bedienungsanleitung

Siemens

Siemens Drager medical Carina Bedienungsanleitung

Siemens

Siemens ARCOSKOP Bedienungs- und Wartungsanleitung

Siemens

Siemens SOMATOM Scope Bedienungsanleitung

Siemens

Siemens MAGNETOM syngo MR D11 Bedienungsanleitung

Siemens

Siemens MOBILETT Plus Betriebsanleitung

Siemens

Siemens MOMMOMAT 1000 Anleitungen und Rezepte

Siemens

Siemens Servo i Bedienungsanleitung

Siemens

Siemens syngo MR E11 Bedienungsanleitung

Siemens

Siemens SOMATOM Emotion Bedienungsanleitung

Siemens

Siemens SOMATOM Bedienungsanleitung

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens MAMMOMAT Inspiration Gebrauchs- und Wartungshandbuch

Siemens

Siemens MULTIMOBIL 10 Bedienungsanleitung

Siemens

Siemens ARCADIS Varic Installationshandbuch

Siemens

Siemens MOBILETT XP Bedienungsanleitung

Siemens

Siemens ACUSON Sequoia Gebrauchs- und Pflegehandbuch

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens Prisma 3T Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung