Siemens SIMATIC ET 200SP Bedienungsanleitung

IM 155-6 PN BA interface module

(6ES7155-6AR00-0AN0)

___________________

___________

___________________

SIMATIC

ET 200SP

IM 155-6 PN BA interface module

(6ES7155-6AR00-0AN0)

Manual

03/2015

A5E34934425

-AA

Preface

Documentation guide

Product overview

Wiring

Parameters/address space

Interrupts, error messages,

diagnostics and system

alarms

Compatibility

Technical specifications

Dimension drawing

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E34934425-AA

Ⓟ

03/2015 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

4Manual, 03/2015, A5E34934425-AA

Preface

Purpose of the documentation

This manual supplements the ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/58649293) system manual.

Functions that generally relate to the system are described in this manual.

The information provided in this manual and in the system/function manuals supports you in

commissioning the ET 200SP distributed I/O system.

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product or on the section of the documentation to which particular attention

should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

Manual, 03/2015, A5E34934425-AA 5

Table of contents

Preface ................................................................................................................................................... 4

1 Documentation guide .............................................................................................................................. 6

2 Product overview .................................................................................................................................... 8

2.1 Properties..................................................................................................................................8

2.2 Functions ................................................................................................................................10

2.2.1 Configuration control (option handling)...................................................................................12

3 Wiring ................................................................................................................................................... 13

3.1 Terminal assignment...............................................................................................................13

3.2 Block diagram .........................................................................................................................15

4 Parameters/address space ................................................................................................................... 16

4.1 Parameters .............................................................................................................................16

4.2 Explanation of the parameters................................................................................................16

4.2.1 Enabling configuration control ................................................................................................16

4.3 Substitute value behavior .......................................................................................................17

4.4 Status of the supply voltage L+ of the I/O modules................................................................17

5 Interrupts, error messages, diagnostics and system alarms................................................................... 18

5.1 Status and error displays ........................................................................................................18

5.2 Interrupts.................................................................................................................................23

5.2.1 Triggering a diagnostics interrupt ...........................................................................................23

5.2.2 Triggering a hardware interrupt ..............................................................................................24

5.2.3 Triggering a pull/plug interrupt ................................................................................................24

5.3 Alarms.....................................................................................................................................25

5.3.1 Channel diagnostics................................................................................................................26

5.3.2 Invalid configuration states of the ET 200SP on PROFINET IO ............................................27

5.3.3 Failure of supply voltage L+ at BaseUnit BU...D ....................................................................27

5.3.4 STOP of the IO controller and recovery of the IO device .......................................................28

6 Compatibility ......................................................................................................................................... 29

7 Technical specifications ........................................................................................................................ 30

A Dimension drawing ............................................................................................................................... 33

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

6Manual, 03/2015, A5E34934425-AA

Documentation guide

The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The system manual describes in detail the configuration, installation, wiring and

commissioning of the SIMATIC ET 200SP. distributed I/O system. The STEP 7 online help

supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, designing

interference-free controllers.

You can download the documentation free of charge from the Internet

(http://www.automation.siemens.com/mcms/industrial-automation-systems-

simatic/en/manual-overview/tech-doc-controllers/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

Documentation guide

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

Manual, 03/2015, A5E34934425-AA 7

Manual Collection ET 200SP

The Manual Collection contains the complete documentation on the SIMATIC ET 200SP

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/84133942).

My Documentation Manager

The My Documentation Manager is used to combine entire manuals or only parts of these to

your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find the My Documentation Manager on the Internet

(http://support.industry.siemens.com/My/ww/en/documentation).

Application examples

Applications examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus in individual products.

You can find application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

CAx Download Manager

The CAx Download Manager is used to access the current product data for your CAx or CAe

systems.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find the CAx Download Manager on the Internet

(http://support.industry.siemens.com/my/ww/en/CAxOnline).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally

Integrated Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

8Manual, 03/2015, A5E34934425-AA

Product overview

2.1

Properties

Article number

6ES7155-6AR00-0AN0 (IM 155-6 PN BA interface module and server module)

View of the module

Figure 2-1 View of the IM 155-6 PN BA interface module and the server module

Properties

The module has the following properties:

●Technical properties

–Connects the ET 200SP distributed I/O system with PROFINET IO

–Supply voltage 1L+ 24 V DC (SELV/PELV). The connection plug is included in the

scope of delivery of the interface module.

●Supported functions (Page 10)

Maximum configuration

●12 I/O modules

Product overview

2.1 Properties

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

Manual, 03/2015, A5E34934425-AA 9

Maximum amount of I/O data

The maximum amount of I/O data is 32 bytes input/output data.

Accessories

The following accessories must be ordered separately:

●Labeling strips

●Reference identification label

A detailed list of the available accessories can be found in the system manual ET 200SP

distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).

Server module

The server module (V1.1.1 and higher) is included in the scope of delivery of the interface

module and also available separately as an accessory. The server module has the following

properties:

●Terminates the backplane bus of the ET 200SP distributed I/O system

●Features a support for 3 spare fuses (5 × 20 mm)

●Identification data I&M 0 to 3

●Retentive storage of the device name for device replacement without topological

configuration

Note

You need to configure and assign parameters to the server module in the configuration

software.

To do this, place the server module in the last configuration slot and enable the parameter

Group diagnostics: No supply voltage L+. If there are 12 I/O modules, the server module is

plugged in slot 13.

You can find more information in the Server module

(http://support.automation.siemens.com/WW/view/en/63257531) manual.

Product overview

2.2 Functions

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

10 Manual, 03/2015, A5E34934425-AA

2.2

Functions

Introduction

The interface module supports the following PROFINET IO functions:

●Integrated switch with 2 ports

●Supported Ethernet services: ping, arp, network diagnostics (SNMP: MIB2, LLDP-MIP

and MRP-MIB)

●Port diagnostics

●Deactivating of ports

●Minimum update time 1 ms

●Media redundancy MRP

●Device replacement without programming device

●Reset to factory settings via PROFINET IO

●Firmware update via PROFINET IO

The interface module supports additional functions:

●Identification data I&M 0 to 3

●Device replacement with and without topological configuration

●Configuration control (option handling)

Requirements

Configuration takes place with GSDML or STEP 7 V13/HSPxyz.

Cabling with fixed connection setting

If you set a fixed connection setting of the port in STEP 7, you must also disable

"Autonegotiation/Autocrossover".

You can find more information on this topic in the STEP 7 online help and

●As of STEP 7 V12, in the function manual PROFINET with STEP 7 V13

(http://support.automation.siemens.com/WW/view/de/49948856/0/en)

●As of STEP 7 V5.5, in the system manual PROFINET System Description

(http://support.automation.siemens.com/WW/view/en/19292127).

Andere Handbücher für SIMATIC ET 200SP

101

Inhaltsverzeichnis

Andere Siemens Aufnahmegeräte Handbücher

Siemens

Siemens XTRI-S Bedienungsanleitung

Siemens

Siemens 3RX9501-1BA00 Bedienungsanleitung

Siemens

Siemens Albatros2 RVA78.690 Bedienungsanleitung

Siemens

Siemens SINAMICS V90 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RMC30 Bedienungsanleitung

Siemens

Siemens 6AT8000-1BB00-0XA0 Bedienungsanleitung

Siemens

Siemens N148/22 Service-Handbuch

Siemens

Siemens VDO DTCO 1381 Stücklistenhandbuch

Siemens

Siemens SIMATIC Distributed I/O System DP/ASi Link Bedienungsanleitung

Siemens

Siemens AS-i Master CM 1243-2 a Bedienungsanleitung

Siemens

Siemens 5WG1 220-2DB31 Service-Handbuch

Siemens

Siemens NCC-1F Bedienungsanleitung

Siemens

Siemens CERBETUS PYROTRONICS VDT Technisches Datenblatt

Siemens

Siemens SIMATIC HMI KP400 Comfort Bedienungsanleitung

Siemens

Siemens CIM Bedienungsanleitung

Siemens

Siemens N148/23 Bedienungsanleitung

Siemens

Siemens Netzteil 3 A Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 5613 Bedienungsanleitung

Siemens

Siemens SIPLUS CMS4000 ION BINARYINPUT T001 Bedienungsanleitung

Siemens

Siemens SIMATIC RTLS4040T Bedienungsanleitung

Siemens

Siemens CM 1542-5 Bedienungsanleitung

Siemens

Siemens ASM 456 Bedienungsanleitung

Siemens

Siemens RNI Bedienungsanleitung

Siemens

Siemens SIMATIC HMI Mobile Panel 277 RO Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch