Siemens Landis & Staefa RAV12 Series Bedienungsanleitung

Operating instructions Landis & Staefa RAV12…

RAV12 - the temperature controller that allows you to set the ideal room temperature at the time you want.

You can either rely on the factory settings or make settings tailored to your personal needs.

Getting started

15 20 25

10 15 20

°C

2226Z03E

°C

AUTO

Position for 24-hour

time switch AUZ3.1

or weekly time switch

AUZ3.7

Tappet positions

on time switch

Tappet tilted

outward for

normal temperature

Tappet tilted

inward for

economy temperature

Setting knob for

normal temperature

Setting knob for

economy temperature

LED

Operating mode

selector

Heating periods

according to

tappet settings

on time switch

Continuous

normal temperature

Continuous

economy temperature

Standby with

frost protection

The controller is supplied with factory-set switching patterns, switching times and temperatures.

To commission it, proceed as follows:

• As soon as connected, the controller switches itself on. Caution: 230 V!

• Set the correct time of day

(with the weekly time switch check the weekday!)

. Make readjustments if

necessary.

• Set the operating mode selector to the required position (e.g. AUTO ).

• Fold up operating instructions again, place them back into position and close the cover again.

Do you want to use automatic operation?

Move the operating mode selector to

the position automatic mode. This

ensures heating according to the

patterns set on the time switch.

Do you require normal temperature?

Move the operating mode selector to

«Normal temperature». This ensures

continuous heating to the normal

temperature.

Do you require economy temperature?

Move the operating mode selector to

«Economy temperature». This ensures

continuous heating to the economy

temperature.

Do you require standby with frost

protection?

Move the operating mode selector to

«Standby». In that case, heating is

provided only when the room

temperature falls below the preset frost

protection limit (5 °C).

Do you feel too warm or too cold?

15 20 25

°C

With the upper setting knob the normal

temperature can be adjusted from 5

to 30 °C in steps of approx. ±1 °C.

10 15 20

°C

With the lower setting knob the

economy temperature can be

adjusted from 5 to 30 °C in steps of

approx. ±1 °C.

CE1B2226E / 02.02.1999 Subject to alteration Siemens Building Technologies / Landis & Staefa Division

Do you want to enter your own heating

periods?

The switching dial is equipped with tappets that can

be tilted. The heating periods are entered by tilting

the tappets within the required period of time:

• Tappets tilted

outward

Normal

temperatur

• Tappets tilted inward:

Economy

temperatur

The factory settings are as follows:

6:00 to 22:00

22:00 to 6:00

To set the heating periods accrding to your needs,

proceed as follows:

⇒ The 24-hour time switch AUZ3.1 has a 24-hour

switching dial. It carries 96 tappets, which

means four tappets per hour, giving a

resolution of 15 minutes. The shortest possible

heating period also is 15 minutes.

⇒ The weekly time switch AUZ3.7 has a 7-day

switching dial. It carries 84 pairs of tappets,

which means 12 pairs of tappets or 24

individual tappets per day. The resolution is

thus one hour. However, since - for mechanical

reasons - at least two tappets need to be tilted

together to set one heating period, the shortest

possible heating period is two hours.

2462Z07

1 Time indicator

2 Switching dial

3 Setting aid

4 Hand

5 Tappet tilted

outward

6 Tappet tilted

inward

Do you want to set the clock?

The switching dial can only be turned in clockwise

direction.

1. First, make a coarse setting:

Turn the switching dial slowly in clockwise

direction until the current time of day reaches

the time indicator (with the weekly dial, also

observe the weekday).

2. Now make the correct setting:

Turn the large hand until the time of day is

correct.

The change from wintertime to summertime, and

vice versa, must be made manually.

Does the LED light up?

• If a remote control is connected and the LED

lights up, the controller indicates that the

override function (e.g. with a telephone remote

control) is activated.

• If no remote control is connected and the LED

lights up, the controller indicates an activated

relays (e.g. heater is switched on).

Energy saving tips without sacrificing

comfort

• Never allow room temperatures to exceed

21 °C.

• Air out the rooms for short periods of time only,

but properly, with the windows wide open.

Andere Siemens Temperaturregler Handbücher

Siemens

Siemens RDF110 Bedienungsanleitung

Siemens

Siemens Free Energy Band RCU61U Betriebsanleitung

Siemens

Siemens SITRANS TS100 Administratorhandbuch

Siemens

Siemens REV23 Bedienungsanleitung

Siemens

Siemens UP 237K Bedienungsanleitung

Siemens

Siemens RVL470 Bedienerhandbuch

Siemens

Siemens 5TC9774-4 Series Bedienungsanleitung

Siemens

Siemens RDU20U Bedienungsanleitung

Siemens

Siemens SITRANS T Series Administratorhandbuch

Siemens

Siemens RDD310 Bedienungsanleitung

Siemens

Siemens RDF300 Series Bedienerhandbuch

Siemens

Siemens RDE10.1DHW Bedienungsanleitung

Siemens

Siemens RCU50U Betriebsanleitung

Siemens

Siemens KIT911 Gebrauchsanweisung

Siemens

Siemens REV24RF Montageanleitung

Siemens

Siemens POS8.4420/109 Bedienungsanleitung

Siemens

Siemens HZ39050 Bedienungsanleitung

Siemens

Siemens Polygyr-Compact Betriebsanleitung

Siemens

Siemens REV15 series Bedienungsanleitung

Siemens

Siemens RLE132 Bedienungsanleitung

Siemens

Siemens RDH10RF/SET Bedienungsanleitung

Siemens

Siemens SITRANS TS100 Administratorhandbuch

Siemens

Siemens RDD10.1DHW Bedienungsanleitung

Siemens

Siemens RCC10U Betriebsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema

Opt Lasers

Opt Lasers TEC-8A-24V-PID-HC Bedienungsanleitung

Vaillant

Vaillant VR 92/3 Bedienungsanleitung