SIIG AV-GM02M3-S1 Series Bedienungsanleitung

HDMI Extender over Dual Cat.X (powered at

TX)

P/N: AV-GM02M3-S1

Safety and Notice

The AV-GM02M3-S1 HDMI Extender over Dual Cat.X (powered at TX) has been tested for

conformance to safety regulations and requirements, and has been certified for international

use. However, like all electronic equipments, the AV-GM02M3-S1 should be used with care.

Please read and follow the safety instructions to protect yourself from possible injury and to

minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................3

PANEL DESCRIPTIONS ....................................................................................................4

Transmitting unit ►TX............................................................................................4

Receiving unit ► RX ...............................................................................................4

CONNECTION DIAGRAM..................................................................................................6

HARDWARE INSTALLATION.............................................................................................7

HDMI PIN DEFINITION.......................................................................................................8

CAT5 / RJ45.......................................................................................................................9

NOTICE............................................................................................................................10

WARRANTY.....................................................................................................................11

INTRODUCTION

The AV-GM02M3-S1 HDMI Extender over Dual Cat.X (powered at TX) boosts up the audio/video

transmission distance up to 60m in HDTV 1080i format, 40m in HDTV 1080p format, or 20m in

HDTV 1080p with 36-bit color depth. With two cost effective solid category cables, users can readily

extend HDTV sources from DVD player, Blu-ray Disc player, PS3, PC, and any other kinds of sources

compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC

monitors. Therefore any HDMI source device can transmit utmost high quality video and audio over

great distance at minimal cost.

The AV-GM02M3-S1 includes two units: transmitting and receiving units. The transmitting unit

is used to capture the input HDMI or DVI signals and carry the signals through two RJ45 connectors

into two cost effective Cat-5/5e/6 cables. The receiving unit is responsible for equalizing the

transmitted HDMI signal. The transmission distance between the sending and receiving units can

be up to 60m at HD (720p/1080i) or 40m at Full HD (1080p). With an 8-level equalization rotary

control on the receiving unit, users can adjust the equalization strength to the received HDMI

signals accordingly, and therefore optimize the transmission distance between source and

destination.

FEATURES

●Support HDMI Deep Color & full 3D

●Extends the transmission distance up to 60m (200ft) from the sources under 1080i or 720p

●Extends the transmission distance up to 40m (130ft) from the sources under 1080p

●Provides independent DDC channel, fully HDCP compliant

●Minimizes the cable skew by adjustable 8-level equalization rotary control switch

●Pure unaltered uncompossed HDMI including DTS-HD Master & Dolby TrueHD

●Wall mounting housing design for easy and robust installation

●Perfectly integrated with other HDMI over Cat.X series products

PACKAGE CONTENTS

●1x AV-GM02M3-S1 [TX and RX]

●1x DC 5V 4A power supply

●1x User Manual

The claimed transmission distance here is subject to the grade of installed cable(s), source

device and display.

For over Cat.X/COAX transmission, the cable(s) has to be solid, not stranded. Any keystone

jack along the transmission path will kill the transmission performance significantly!

SPECIFICATIONS

Model Name

AV-GM02M3-S1

Technical

AV-GM02M3-S1[Tx]

AV-GM02M3-S1[Rx]

Role of usage

Transmitter [TX]

Receiver [RX]

HDMI compliance

HDMI Deep Color & full 3D

HDCP compliance

Yes

Video bandwidth

Single-link 225MHz [6.75Gbps]

Video support

480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color

HDMI over UTP

transmission [24-bit]

Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6]

HD (720p/1080i)-50m (165ft) [CAT5e] / 60m (200ft) [CAT6]

Audio support

Surround sound (up to 7.1ch) or stereo digital audio

Equalization

8-level digital rotary switch for signal level control at RX

Input TMDS signal

1.2 Volts [peak-to-peak]

Input DDC signal

5 Volts [peak-to-peak, TTL]

ESD protection

[1] Human body model —19kV [air-gap discharge] & 12kV [contact

discharge]

[2] Core chipset —8kV

PCB stack-up

4-layer board [impedance control —differential 100Ω; single 50Ω]

Input

1x HDMI

2x RJ-45

Output

2x RJ-45

1x HDMI

HDMI source control

IR remote control

N/A

HDMI connector

Type A [19-pin female]

RJ-45 connector

WE/SS 8P8C with 2 LED indicators

3.5mm connector

None

Rotary control switch

None

8-level signal equalization

Mechanical

Housing

Metal enclosure

Dimension

[L x W x H]

Model

[TX/RX] 84 x 61 x 24mm [3.3" x 2.4" x 1"]

Package

270 x 175 x 80mm [10.6" x 6.9" x 3.1"]

Carton

450 x 370 x 300mm [1'6" x 1'3" x 11.8"]

Weight

Model

206g [7.3oz]

214g [7.6oz]

Package

840g [1.9 lbs]

Fixedness

Wall-mounting case with screws

Power supply

5V 4A DC

Power consumption

1.5 Watt [max]

Operation

temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Transmitting unit ►AV-GM02M3-S1-TX

Front Panel

Rear Panel

1. HDMI IN: Connect to a HDMI source device with a HDMI male-male cable.

2. +5V DC: Connect to a 5V DC power supply unit.

3. A/V SIGNAL: Link a Cat-5/5e/6 cable to the RJ45 A/V SIGNAL port on the RX unit of

AV-GM02M3-S1.

4. CTRL CHANNEL: Link a Cat-5/5e/6 cable to the RJ45 CTRL CHANNEL port on the RX unit.

Receiving unit ►AV-GM02M3-S1-RX

Front Panel

Rear Panel

5. Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI

signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from

longest possible range to short distance. Adjust the signal level from 7 to 0 and stop turning the

rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting

may cause overpowering issue that would shorten the product life significantly!

6. HDMI OUT: Connect to a HDMI display or projector with a HDMI male-male cable.

7. A/V SIGNAL: Link a Cat-5/5e/6 cable to the RJ45 A/V SIGNAL port on the TX unit of

AV-GM02M3-S1.

8. CTRL CHANNEL: Link a Cat-5/5e/6 cable to the RJ45 CTRL CHANNEL port on the TX unit.

CONNECTION DIAGRAM

HARDWARE INSTALLATION

1. Connect a HDMI source to the transmitting unit of AV-GM02M3-S1.

2. Connect a HDMI display or projector to the receiving unit of AV-GM02M3-S1.

3. Connect two Cat-5/5e/6 cables between the transmitting and receiving units via A/V SIGNAL and

CTRL CHANNEL RJ45 ports respectively.

4. Make sure these two Cat-5/5e/6 cables are tightly connected and not loose.

5. Plug in the 5V DC power supply unit to the power jack on the transmitting unit of

AV-GM02M3-S1.

6. If you see flickering or blinking image on the display, please adjust the rotary control switch to

improve the cable skew. 0 stands for the strongest HDMI signal level for longest possible

transmission length while 7 stands for the weakest HDMI signal level for short transmission

length. Please adjust the EQ signal level from 7 to 0 and stop turning the rotary switch whenever

the audio/video is playing normally. Inappropriate signal level setting may cause overpowering

issue that would shorten the product life significantly!

HDMI PIN DEFINITION

Type A (Receptacle) HDMI

Pin 1

TMDS Data2+

Pin 11

TMDS Clock Shield

Pin 2

TMDS Data2 Shield

Pin 12

TMDS Clock–

Pin 3

TMDS Data2–

Pin 13

Pin 4

TMDS Data1+

Pin 14

Reserved (N.C. on device)

Pin 5

TMDS Data1 Shield

Pin 15

SCL

Pin 6

TMDS Data1–

Pin 16

SDA

Pin 7

TMDS Data0+

Pin 17

DDC/CEC Ground

Pin 8

TMDS Data0 Shield

Pin 18

+5V Power

Pin 9

TMDS Data0–

Pin 19

Hot Plug Detect

Pin 10

TMDS Clock+

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SIIG Extender Handbücher

SIIG

SIIG AV-GM0403-S1 Series Bedienungsanleitung

SIIG

SIIG CE-H20S11-S1 Bedienungsanleitung

SIIG

SIIG CE-H21U11-S1 Bedienungsanleitung

SIIG

SIIG CE-HM0052-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02D3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02J3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03G3-S1 Bedienungsanleitung

SIIG

SIIG CE-H27611-S1 Bedienungsanleitung

SIIG

SIIG CE-H24G11-S1 Bedienungsanleitung

SIIG

SIIG CE-H23E11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03K3-S1 Bedienungsanleitung

SIIG

SIIG CE-H22N15-S1 Produktinformationsblatt

SIIG

SIIG AV-GM03T3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02R3-S1 Bedienungsanleitung

SIIG

SIIG CE-H22T11-S1 Bedienungsanleitung

SIIG

SIIG CE-H27611-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04G3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03S3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02X3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04T3-S1 Series Bedienungsanleitung

SIIG

SIIG CE-VG0711-SA Bedienungsanleitung

SIIG

SIIG JU-EX0011-S1 Bedienungsanleitung

SIIG

SIIG CE-H24B11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0463-S1 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung