SIIG AV-GM03K3-S1 Bedienungsanleitung

RS-232 over CAT5 Extender

P/N: AV-GM03K3-S1

~ 1 ~

Safety and Notice

The AV-GM03K3-S1 has been tested for conformance to safety regulations and requirements,

and has been certified for international use. However, like all electronic equipments, the

AV-GM03K3-S1 should be used with care. Please read and follow the safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Follow all instructions and warnings marked on this unit.

Do not attempt to service this unit yourself, except where explained in this manual.

Provide proper ventilation and air circulation and do not use near water.

Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

Use only the power adapter and power cords and connection cables designed for this unit.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

~ 2 ~

INTRODUCTION

With only one CAT-5e cable, the CV-87 series lets you extend RS-232 signal to cover the

distance up to 1,000m (1,100 yards). The devices are composed of a transmitter and a receiver. The

transmitter is installed near the serial signal source, and the receiver is placed near the destined

device. For AV-GM03K3-S1, the RX and TX relationship between source and destination units are

adjustable through the settings of DIP switches. After finishing the setup, the serial connection has a

fixed communication channel between local and remote sites. For the receiver, the same source unit

as transmitter, but on the receiving side, the receivers can be cascadable up to 32 units. This

structure allows users to control tens of remote units through single Cat-5 cable. Typical applications

include security alarm system, POS system, dumb terminal, etc.

FEATURES

Sends RS-232 data up to 1,000m (1,100 yds)

Real time pure hardware solution

Extra RJ-45 for cascading

Compact size

Transmitter offers cascading ability; the remote units can be cascaded up to 32 devices

PACKAGE CONTENTS

1x AV-GM03K3-S1 [TX & RX]

2x 5V power adapter

1x User Manual

~ 3 ~

SPECIFICATIONS

Model Name

AV-GM03K3-S1 (TX)

AV-GM03K3-S1 (RX)

Technical

Role of usage

Transmitter [TX]

Receiver [RX]

Transmitter [TX]

Receiver [RX]

Transmission length

Up to 1,000m (1,100yds) [CAT5e]

Baud rate

Up to 57.6kbps in cascade mode

Input

1x RS-232

1x RJ-45

1x RS-232

1x RJ-45

Output

1x RJ-45

1x RS-232

1x RJ-45

1x RS-232

1x RJ-45

RS-232 connector

DE-9 [9-pin D-sub female]

RJ-45 connector

WE/SS 8P8C with 2 LED indicators

DIP switch

1-pin DIP switch for master/slave connection mode

Rotary control switch

None

8-level rotary switch

Mechanical

Housing

Metal case

Dimensio

[L x W x

Model

64 x 48 x 26mm [2.5" x 1.9" x 1" ]

64 x 48 x 35mm [2.5" x 1.9" x 1.4"]

Packag

270 x 175 x 80mm [10.6" x 6.9" x 3.1"]

Carton

450 x 370 x 300mm [1'6" x 1'3" x 11.8"]

Weight

Model

174g [6.1oz]

Packag

750g [26.4oz]

Fixedness

Wall-mounting case upon request

Power supply

5V 2A DC

Power consumption

1 Watt [max]

Operation

temperature

0~40C [32~104F]

Storage temperature

-20~60C [-4~140F]

Relative humidity

20~90% RH [no condensation]

~ 4 ~

1. Connect your serial RS-232 source to the transmitting unit.

2. Connect your serial receiver to the receiving unit.

3. Connect your CAT-5/5e/6 cable between the transmitting and receiving units.

4. Make sure your CAT-5/5e/6 cable is tightly connected and not loose.

5. Plug in 5V DC power cord to the power jack of the receiving unit(s).

6. Plug in 5V DC power cord to the power jack of the transmitting unit.

Hardware Installation

~ 5 ~

DIP SWITCH

DIP SWITCH Position

AV-GM03K3-S1; point-to-point connection

Master

Slave

~ 6 ~

1.) Move pin to “ON”position.

1.) Move pin to “OFF”position.

Master

MASTER

1.) Move pin to “ON”position.

Point-to-multipoint connection

Master

Slave

1.) Move pin to “ON”position.

1.) Move pin to “OFF”position.

Slave

1.) Move pin to “OFF”position.

~ 7 ~

Serial Command

In order to control the remote units, AV-GM03K3-S1 offers a set of serial command to setup the

baud rate, ID, and enable of the feedback from the remote units.

Table 1 —Serial Command Protocol

Byte #

Content

Description

Byte 0

0x7E

Header

Byte 1

0xB9

Header

Byte 2

0X5D

Header

Byte 3

“assigned ID shown as hex

number”

Defined by rotary dial

NOTICE

1. AV-GM03K3-S1 is initially with the baud rate 9600 bps. Therefore, if users would like to

establish a successful communication channel or change the baud rate correctly, the initial

communication rate should be 9600 bps.Turning off and on receiving units will bring the baud

rate back to 9600Kbps! While cascade bit is set to OFF, the baud rate of communication is

solely dependent upon the capability of RS-232 sender and receiver on both sides.

Performance Guide for HDMI over LAN Cable Transmission

Performance rating

Type of LAN cable

Wiring

Shielding

CAT5

CAT5e

CAT6

Solid

Unshielded

(UTP)







Shielded (STP)





Stranded

Unshielded

(UTP)





Shielded (STP)





Termination

Please use EIA/TIA-568-B termination (T568B) at any time

~ 8 ~

WARRANTY

The SELLER warrants the AV-GM03K3-S1 to be free from defects in the material and

workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer.

Should this product fail to be in good working order within 3 years warranty period, The SELLER, at

its option, repair or replace the unit, provided that the unit has not been subjected to accident,

disaster, abuse or any unauthorized modifications including static discharge and power surges.

Unit that fails under conditions other than those covered will be repaired at the current price of

parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of

reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or

assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without

a return authorization number.

The warranty is in lieu of all other warranties expressed or implied, including without limitations,

any other implied warranty or fitness or merchantability for any particular purpose, all of which are

expressly disclaimed.

Proof of sale may be required in order to claim warranty. Customers outside Taiwan are

responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty

and cable must be free from any markings, scratches, and neatly coiled.

The content of this manual has been carefully checked and is believed to be accurate. However,

The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.

The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages

resulting from any defect or omission in this manual, even if advised of the possibility of such

damages. Also, the technical information contained herein regarding the CV-87P/CV-87C features

and specifications is subject to change without further notice.

April, 2018

Support

For more info or tech support

http://www.siig.com/support

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SIIG Extender Handbücher

SIIG

SIIG JU-EX0011-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03T3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23T11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0473-S1 Bedienungsanleitung

SIIG

SIIG CE-H26411-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0413-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03G3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23811-S1 Bedienungsanleitung

SIIG

SIIG CE-H22N15-S1 Produktinformationsblatt

SIIG

SIIG CE-D20012-S1 Bedienungsanleitung

SIIG

SIIG CAT5e Bedienungsanleitung

SIIG

SIIG CE-DV0061-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04D3-S1 Bedienungsanleitung

SIIG

SIIG CE-DV0061-S1 Bedienungsanleitung

SIIG

SIIG CE-H27611-S1 Bedienungsanleitung

SIIG

SIIG CE-H23E11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04T3-S1 Series Bedienungsanleitung

SIIG

SIIG CE-HM0051-S1 Bedienungsanleitung

SIIG

SIIG 04-1404A Bedienungsanleitung

SIIG

SIIG AV-GM02S3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03X3-S1 Bedienungsanleitung

SIIG

SIIG CE-DP0511-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0463-S1 Bedienungsanleitung

SIIG

SIIG CE-H24G11-S1 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung