SIIG CE-DV0061-S1 Bedienungsanleitung

Mini DVI Extender

CE-DV0061-S1

Quick Installation Guide

Safety and Notice

The Mini DVI Extender has been tested for conformance to safety regulations and

requirements. However, like all electronic equipment, the Mini DVI Extender should be

used with care. Please read and follow the safety instructions to protect yourself from

possible injury and to minimize the risk of damage to the unit.

 Follow all instructions and warnings marked on this unit

 Do not attempt to service this unit yourself, except where explained in this manual

 Provide proper ventilation and air circulation and do not use near water

 Keep objects that might damage the device at a safe distance and assure that the

placement of this unit is on a stable surface

 Use only the power adapter and power cords and connection cables designed for this

unit

 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning

The Mini DVI Extender extends your PC DVI transmission distance up to 30 meters

with maximum resolution of 1024x768x60. With this extender, you can transmit high

quality digital video of PC applications thru one cost effective CAT-5/5e/6 to a remote

monitor or projector, instead of using short and expensive DVI cables. With

embedded EDID inside the adaptor, your PC will continue to send the digital video

signal even when the monitor is not connected. The user can then disconnect the

monitor, place it in a remote location and reconnect it without rebooting the operating

system.

The Mini DVI Extender includes two adapters: one transmitting and one receiving

unit. The transmitting unit is connected to your PC DVI output and the receiving unit

is connected to the monitor. While successfully connected, the two LED lights on

RJ-45 connector will blink. The transmission distance between the sending and

receiving units can be up to 30 meters at XGA and 10 meters at UXGA. With it’s

compact size and requiring no power, the Mini DVI Extender is the best cost effective

choice for bringing your digital video to a remote display.

Introduction

DVI PC DVI monitor

CAT5e cable

Features

Package Contents

 DVI 1.1 compliant

 Extend transmission distance up to 30 meters from the source at XGA

 Extend transmission distance up to 10 meters from the source at UXGA

 Activity LED lights

 Compact size

 Mini DVI Extender (1 transmitter + 1 receiver)

 Quick Installation Guide

Technical Specifications

 Video Bandwidth: 1.65 Gbps (DVI 1.1)

 Input TMDS signal: 1.2 volts (peak-to-peak)

 Input DDC signal: 5 volts (peak-to-peak)

 DVI-D Connector

 RJ-45 Connector: 2 indication LEDs

 Dimensions: 50x 40x 20mm (Lx W x H)

 Weight: 20g

1. Connect your transmitting DVI extender to your PC source.

2. Connect your receiving DVI extender to your remote DVI equipped monitor.

3. Make sure your CAT-5/5e/6 cable is securely connected with no loose wires.

4. Enjoy your high quality PC video on the extended screen.

Hardware Installation

1. All the transmission distances are measured using Belden CAT-5e 125MHz.

2. To reduce the interference among the unshielded twisted pairs of wires in

CAT-5/5e/6 cable, you can use shielded CAT-5/5e/6 cables to improve EMI

problems, which is worsen in the long transmission.

3. The quality of the CAT-5/5e/6 cables is the major factor effecting transmission

distance and signal quality, actual transmission distance depends on the quality of

your CAT-5/5e/6 cable. For resolution greater than 1280x1024, CAT-6 is

recommended.

Notice

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at

www.siig.com and click Support. Our online support database is updated daily with

new drivers and solutions. Answers to your questions could be just a few clicks away.

You can also submit questions online and a technical support analysts will promptly

respond.

SIIG offers a 2-year manufacturer warranty with this product. Please see our web site for

more warranty details. If you encounter any problems with this product, please follow the

procedures below.

A) If it is within the store's return policy period, please return the product to the store where

you purchased from.

B) If your purchase has passed the store's return policy period, please follow these steps

to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If

the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All software, cable(s) and any other

accessories that came with the original package must be included.

• Clearly write your RMA number on the top of the returned package. SIIG will refuse

to accept any shipping package, and will not be responsible for a product returned

without an RMA number posted on the outside of the shipping carton.

• You are responsible for the cost of shipping. Ship the product to the following

address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #: __________________

• SIIG will ship the repaired or replaced product via Ground in the U.S. and

International Economy outside of the U.S. at no cost to the customer.

Inhaltsverzeichnis

Andere SIIG Extender Handbücher

SIIG

SIIG CE-H24911-S1 Bedienungsanleitung

SIIG

SIIG CE-H20S11-S1 Bedienungsanleitung

SIIG

SIIG CE-KV0511-S1 Bedienungsanleitung

SIIG

SIIG CE-DV0061-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02P3-S1 Bedienungsanleitung

SIIG

SIIG CE-H22N15-S1 Produktinformationsblatt

SIIG

SIIG AV-GM0403-S1 Series Bedienungsanleitung

SIIG

SIIG AV-GM03W3-S1 Bedienungsanleitung

SIIG

SIIG CE-H27611-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04D3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03G3-S1 Bedienungsanleitung

SIIG

SIIG 04-1404A Bedienungsanleitung

SIIG

SIIG AV-GM04T3-S1 Series Bedienungsanleitung

SIIG

SIIG JU-EX0111-S1 Bedienungsanleitung

SIIG

SIIG CE-H24G11-S1 Bedienungsanleitung

SIIG

SIIG CE-H23E11-S1 Bedienungsanleitung

SIIG

SIIG CE-H27611-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04S3-S1 Series Bedienungsanleitung

SIIG

SIIG AV-GM0413-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02X3-S1 Bedienungsanleitung

SIIG

SIIG CE-D20111-S1 Bedienungsanleitung

SIIG

SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Produktinformationsblatt

SIIG

SIIG AV-GM04G3-S1-U Bedienungsanleitung

SIIG

SIIG CAT5e Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung