SIIG CE-KV0511-S1 Bedienungsanleitung

Introduction

The USB VGA KVM Console Extender over CAT5 allows for

keyboard and mouse control over a computer system

from either the local site or up to 150 meters away.

Features and Benets

• Control your computer system from transmitter

or receiver by USB Keyboard, Mouse, and

Monitor Console

•

Supports high resolution video up to 1920 x 1080

• Transmission distance: Up to 150 meters over

standard CAT5 UTP network cable

• Supports VGA, SVGA and MultiSync monitors

• Local monitor supports DDC; DDC2; DDC2

System Requirements

• PC with an available VGA and USB port

Package Content

• USB VGA KVM Console Extender over CAT5

(Transmitter and Receiver)

• Power adapters (2)

• VGA with USB Type A cable

• Rubber pads (4)

• Quick installation guide

04-0895B

USB VGA KVM Console

Extender over CAT5

Quick Installation Guide

Application

Figure 1: Application

Transmitter

Receiver

PC with USB and

VGA port

Local console

(keyboard, mouse

and VGA display)

Remote console

(keyboard, mouse

and VGA display)

* Extension distance up to 150 meters

VGA with USB Type A cable

CATx cable

VGA cable

Layout

Figure 2: Front Panel of Transmitter

Figure 3: Rear Panel of Transmitter

• Remote LED: Blinks when activity is detected

•

Local USB (mouse): Connects to local USB mouse

• Local VGA display: Connects to local VGA display

• Local USB (keyboard): Connects to local USB

keyboard

• PC: Connects to your computer system by using

the included VGA with USB Type A Cable

• RJ45: Connects to the Receiver's RJ45 port by

using one CATx cable (cable not included)

Remote LED Local USB

(mouse)

Local USB

(keyboard)

Local VGA

display

+DC 5V

Power LED

PC RJ45

• Power LED: On when power adapter is connected

• +DC 5V: Plug the included power adapter here

Figure 4: Front Panel of Receiver

Figure 5: Rear Panel of Receiver

Remote LED

Remote USB

(mouse)

Remote USB

(keyboard)

Remote VGA

display

+DC 5V

Adjusting RJ45

• Remote LED: Blinks when activity is detected

• Remote USB (mouse): Connects to remote USB

mouse

• Remote VGA display: Connects to remote VGA

display

• Remote USB (keyboard): Connects to remote

USB keyboard

Power LED

• Adjusting: Adjustment to get the clearest

picture possible. Refer to Adjusting Switch

section on the next page

• RJ45: Connects to the Transmitter's RJ45 port by

using one CATx cable (cable not included)

•

Power LED: On when power adapter is connected

• +DC 5V: Plug the included power adapter here

Power Adapter Specications

• Round plug: 10mm (L) x 2.5mm (ID) x 5.5mm (OD)

• Input: 110-240V 50/60Hz

• Output: 5V / 1A

Hardware Installation

1. Connect the Transmitter's and Receiver's RJ45

ports by using one CATx cable (cable not

included)

2. Plug a USB keyboard and mouse (not included)

into the Transmitter's Local USB (keyboard)

and Local USB (mouse), then plug a VGA

display into the Transmitter's Local VGA output

by using a VGA cable (VGA cable not included).

OD ID

Figure 6

3. Connect your computer system to the Transmitter's

PC port by using the included VGA with USB

Type A Cable.

4. Plug a USB keyboard and mouse (not included)

into the Receiver's Local USB (keyboard) and

Local USB (mouse), then plug a VGA display

into the Receiver's Local VGA output by using a

VGA cable (VGA cable not included).

5. Plug the included power adapter into Transmitter's

and Receiver's +DC 5V power jack, then plug it

into a reliable power outlet.

6. The USB VGA KVM Console Extender over CAT5 is

ready for use.

Adjusting Switch

Match the display resolution under dierent CATx

cable lengths to get the clearest picture. Move the

switch through adjustment points, M, S or L, to nd

the best picture (see Figure 7). See Table 1 for the

recommended setting under different resolutions

and CATx cable lengths.

Figure 7: Adjusting Switch

Table 1: M / S / L Denition

M S L

Extension

distance

50-100

meters <50 meters 100-150

meters

Recommend

resolution

up to

1280x1024

up to

1920x1080

up to

1024x768

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web

site at www.siig.com and click Support. Our online support database is

updated daily with new drivers and solutions. Answers to your questions

could be just a few clicks away. You can also submit questions online and a

technical support analyst will promptly respond.

SIIG offers a 3-year manufacturer warranty with this product. This

warranty covers the original purchaser and guarantees the product to be

free of any defects in materials or workmanship for three (3) years from the

date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or

product having similar features and functionality) the product if defective

in materials or workmanship. This warranty gives you specic legal rights,

and you may also have other rights which vary from state to state. Please

see our web site for more warranty details.

If you encounter any problems with this product, please follow the

procedures below.

A) If it is within the store's return policy period, please return the product

to the store where you purchased it.

B) If your purchase has passed the store's return policy period, please

follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request. Go to www.siig.com, click Support,

then Request A Product Replacement to submit a request to SIIG RMA or

fax a request to 510-657-5962. Your RMA request will be processed, if the

product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

•

Properly pack the product for shipping. All software, cable(s) and any

other accessories that came with the original package must be included.

•Clearly write your RMA number on the top of the returned package.

SIIG will refuse to accept any shipping package, and will not be

responsible for a product returned without an RMA number posted

on the outside of the shipping carton.

•You are responsible for the cost of shipping to SIIG. Ship the

product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

•SIIG will ship the repaired or replaced product via Ground in the

U.S. and International Economy outside of the U.S. at no cost to the

customer.

USB VGA KVM Console Extender over CAT5

is a trademark of SIIG, Inc. SIIG and the SIIG

logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of

Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Inc. All other names

used in this publication are for identication only and may be trademarks of their respective owners.

PRODUCT NAME

USB VGA KVM Console Extender over CAT5

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire,

USB, and legacy I/O adapters) that bridge the connection between

Desktop/Notebook systems and external peripherals. SIIG continues to

grow by adding A/V and Digital Signage connectivity solutions to our

extensive portfolio. All centered around the distribution and switching

of A/V signals over CAT5/6, these products include matrix switches,

distribution ampliers, extenders, converters, splitters, cabling, and more.

SIIG is the premier one-stop source of upgrades and is committed

to providing high quality products while keeping economical and

competitive prices. High-quality control standards are evident by one

of the lowest defective return rates in the industry. Our products offer

comprehensive user manuals, user-friendly features, and most products

are backed by a lifetime warranty.

SIIG products can be found in many computer retail stores, mail order

catalogs, and e-commerce sites in the Americas, as well as through major

distributors, system integrators, and VARs.

Inhaltsverzeichnis

Andere SIIG Extender Handbücher

SIIG

SIIG CE-HM0051-S1 Bedienungsanleitung

SIIG

SIIG CE-HM0052-S1 Bedienungsanleitung

SIIG

SIIG CE-H24G11-S1 Bedienungsanleitung

SIIG

SIIG CE-H22N15-S1 Produktinformationsblatt

SIIG

SIIG AV-GM02X3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23411-S1 Produktinformationsblatt

SIIG

SIIG AV-GM0473-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03X3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02R3-S1 Bedienungsanleitung

SIIG

SIIG JU-EX0111-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04D3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02M3-S1 Series Bedienungsanleitung

SIIG

SIIG AV-GM03W3-S1 Bedienungsanleitung

SIIG

SIIG CE-H26411-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03T3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04A3-S1-IR Bedienungsanleitung

SIIG

SIIG CAT5e Bedienungsanleitung

SIIG

SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Produktinformationsblatt

SIIG

SIIG 04-1404A Bedienungsanleitung

SIIG

SIIG CE-H23T11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02P3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02S3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04T3-S1 Series Bedienungsanleitung

SIIG

SIIG AV-GM04Q3-S1 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung