SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Produktinformationsblatt

• Bi-directional IR sensors allow you to remotely

control the HDMI source device from the

remote display side or control the remote

display from the source device side

• High quality metal housing with ventilation

panels better promote the heat dissipation and

system stability during long hours of operation

Package Contents

• HDMI 4K HDBaseT Extender Over Single Cat5e/6

Cable with IR Control - 70m (TX & RX)

• Power adapter

• IR Blaster extension cable & IR Receiver

extension cable

• Mounting ears & screw kits

• User Reference Guide

Important Note: Incorrect placement of IR

Receiverand IR Blaster cables may result in

cable failures. Please check carefully before

plugging in the IR cables to proper IR sockets.

The IR Receiver cable always plugs into an IR

In port & IR Blaster cable always plugs into an

IR Out port.

• IR Blaster cable: Plug into the Transmitter's or

Receiver's IR Out to emit IR signals

• IR Receiver cable: Plug into the Receiver's or

Transmitter's IR In to receive IR signals

Control your media player (such as DVD) at the TV

side using the media player's remote controller

• Plug the IR Receiver cable to the Receiver's

IR In port

• Plug the IR Blaster cable to the Transmitter's

IR Out port.

Control your TV at the media player side using the

TV's remote controller

• Plug the IR Receiver cable to the Transmitter's

IR In port.

• Plug the IR Blaster cable to the Receiver's

IR Out port.

Hardware Installation

Note: To achieve optimal performance, a CAT6 cable

is recommended.

1. Power off all devices including your HDMI source

and display.

2. Connect your HDMI source to the Transmitter's

HDMI IN connector with an HDMI cable (not

included).

3. Optional: Connect the IR Receiver or Blaster

extension able according to the instructions on

page 6-7.

4. Connect your HDMI display to the Receiver's HDMI

OUT connector with an HDMI cable (not included).

5. Optional:Connect the IR Receiver or Blaster

extension cable according to the instructions on

page 6-7.

6. Connect and link the Transmitter and Receiver by

a CAT5e/6 cable.

7. Plug the included power adapter into the

Transmitter's or Receiver's Power Jack, then plug

the power adapter into a reliable power outlet.

(Note: It's recommended to connect it to the

Transmitter)

8. Power on your HDMI device and HDMI display.

9. The HDMI Extender is ready for use.

Application

Extends HDMI signals such as game consoles,

DVD players or computers up to 70m (230ft) and

supports bi-directional IR.

Figure 7: Application

DVD

IR OUT IR OUT

IR IN IR IN

ReceiverTransmitter TV

* When using the remote control, please make sure its distance to the IR

Receiver extension cable is within 5 meters (16.4 ft) and without obstructions.

FAQ & Solutions

Q: The HDMI display doesn't display images:

A: Check the LED indicators' status to make sure all

connections are connected properly.

If the status is abnormal, check the followings:

1) Whether the power adapter is connected to

theTransmitter (TX) or Receiver (RX) securely.

2) Make sure the Network cable (CAT5e/6) is

rmlyconnected between TX and RX.

3) Make sure the HDMI cables are securely

connected.

- Between the HDMI source and the TX.

- Between the HDMI display and the RX.

Q: The LED Indicator (3) is ashing and there is no

image on the HDMI display:

A: Check if the HDMI display has been switched to

the right HDMI input channel.

Q: The Link LED (2) is flashing and LED Indicator (3) is

off:

A: 1) Check whether there is HDMI signal from HDMI

source.

2) Check whether the HDMI cable is securely

connected between the RX and HDMI display.

Q: The HDMI display is ashing and having

disturbance.

A: Try other HDMI cables to connect the HDMI source

to the TX.

Inhaltsverzeichnis

Andere SIIG Extender Handbücher

SIIG

SIIG AV-GM04Q3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03X3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23T11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04A3-S1-IR Bedienungsanleitung

SIIG

SIIG CE-H20S11-S1 Bedienungsanleitung

SIIG

SIIG CE-H23E11-S1 Bedienungsanleitung

SIIG

SIIG CE-H22N15-S1 Produktinformationsblatt

SIIG

SIIG AV-GM0413-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04G3-S1-U Bedienungsanleitung

SIIG

SIIG AV-GM03G3-S1 Bedienungsanleitung

SIIG

SIIG CE-HM0052-S1 Bedienungsanleitung

SIIG

SIIG CE-H24911-S1 Bedienungsanleitung

SIIG

SIIG CE-H20011-S1 Bedienungsanleitung

SIIG

SIIG CE-DP0511-S1 Bedienungsanleitung

SIIG

SIIG CE-KV0511-S1 Bedienungsanleitung

SIIG

SIIG AV-GM03W3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02S3-S1 Bedienungsanleitung

SIIG

SIIG CE-DV0061-S1 Bedienungsanleitung

SIIG

SIIG CE-H26411-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0463-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02R3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM02J3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0473-S1 Bedienungsanleitung

SIIG

SIIG CE-H24B11-S1 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung