SIIG AV-GM08F3-S1 Bedienungsanleitung

5x5 VGA/Component/S-Video/Composite Matrix

with Audio

P/N: AV-GM08F3-S1

Safety and Notice

The AV-GM08F3-S1 5x5 VGA/Component/S-Video/Composite Matrix with Audio has been

tested for conformance to safety regulations and requirements, and has been certified for

international use. However, like all electronic equipments, the AV-GM08F3-S1 should be used

with care. Please read and follow the safety instructions to protect yourself from possible

injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................3

PANEL DESCRIPTIONS.....................................................................................................4

CHANNEL CONTROL ........................................................................................................5

CONNECTION DIAGRAM ................................................................................................12

HARDWARE INSTALLATION...........................................................................................13

WARRANTY .....................................................................................................................13

INTRODUCTION

The AV-GM08F3-S1 5x5 VGA/Component/S-Video/Composite Matrix with Audio receives and

amplifies up to 5 VGA inputs, perfectly switches the desired input to the VGA equipped monitor or

receiver. This matrix enables the broadcast of multiple computers’ audio and video outputs to

multiple displays. Any one of the inputs can be broadcasted to any or all of the outputs without

introducing noticeable video quality distortion. The matrix supports VGA video bandwidth up to

400MHz and also supports YPbPr component, S-Video, and Composite signals. The re-transmitted

video quality is guaranteed and the longest transmission is up to 65 meters (210 feet). Therefore,

AV-GM08F3-S1 offers the most convenient and cost effective means for swift switch of high quality

PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio matrix,

AV-GM08F3-S1 is ready to be as YPbPr matrix with stereo audio and ideally for boardroom,

showroom, and exhibition. Through IR remote, RS-232, Ethenet or front panel push button, the

control of AV-GM08F3-S1 becomes versatile and easier.

FEATURES

●Broadcasts the audio and video outputs from five computers to five monitors and speakers

●Up to 5 Graphics/Video Inputs*

●Supports video bandwidth up to 400 MHz

●Any one of the inputs can be broadcasted to any or all of the outputs

●Built-in video signal amplifier for up to 65m (210-ft) long transmission for each video output

●3.5mm audio outputs to drive either speakers or earphones

●Multiple control by IR remote, push button, Ethernet, and RS-232 control

●1RU rack mountable

PACKAGE CONTENTS

* Appropriate adapters are necessary for video inputs, such as component, composite

and S-Video.

●1x AV-GM08F3-S1 ●1x DC 5V 4A in-line with C7 power cord

●1x Rack-mounting ear set ●1x IR remote control

●1x Installation CD ●1x User Manual

SPECIFICATIONS

Model Name

AV-GM08F3-S1

Technical

Role of usage

5x5 true matrix switcher

Supported

input/output

VGA / Component / S-video / Composite*

Video bandwidth

400MHz

Video support

1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60]

or even higher

Transmission

UXGA [1600x1200] –65m [210ft]

Audio support

Analog stereo

Input

5x VGA [component/s-video/composite through adapters]

5x 3.5mm analog stereo audio

1x RS-232

Output

5x VGA [component/s-video/composite through adapters]

5x 3.5mm analog stereo audio

VGA connector

HD-15 [15-pin D-sub female]

RS-232 connector

DE-9 [9-pin D-sub female]

3.5mm connector

Earphone jack for analog stereo audio

RJ-45 connector

WE/SS 8P8C

Input selection

IR remote / push button / RS-232 control / Ethernet

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 36-40kHz

Mechanical

Dimensions

[L x W x H]

Model

1RU –440 x 96 x 44mm [1'5" x 3.8" x 1.7"]

Package

510 x 230 x 70mm [1'8" x 9.1" x 2.8"]

Carton

510 x 410 x 252mm [1'8" x 1'4" x 10"]

Weight

Model

1341g [3 lbs]

Package

2100g [4.6 lbs]

Fixedness

1RU rack-mount with ears

Power supply

5V 4A DC

Power consumption

13 Watt [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

1. Output Display LED 4. Select input

2. Input Display LED 5. Receive IR signal

3. Select output 6. Powe indication LED

Rear Panel

7. Analog audio input 11. Ethernet control input

8. Analog audio output 12. Serial channel control

9. VGA input 13. +5V DC

10. VGA output

* Component and composite input/output can be done by using the optional accessory VGA-

to-Component adapter to connect to the VGA socket. However, for S-Video input/output,

please find a VGA-to-S-video adapter available in the market to fulfill you need.

CHANNEL CONTROL

IR Remote Control

Please push one of the INPUT buttons to choose which VGA input source you are going to

setup. After that, you can have multiple outputs playing the same content from the selected INPUT

1 –INPUT 5 by pushing the corresponding OUTPUT buttons. The setting will be effective in a couple

of seconds.

INPUT & OUTPUT MAPPING

INPUT 1

VGA input port #1

INPUT 2

VGA input port #2

INPUT 3

VGA input port #3

INPUT 4

VGA input port #4

INPUT 5

VGA input port #5

OUTPUT 1

VGA output port #1

OUTPUT 2

VGA output port #2

OUTPUT 3

VGA output port #3

OUTPUT 4

VGA output port #4

OUTPUT 5

VGA output port #5

Software Control via the RS-232 or Ethernet port

Software Control Menu

1. Setting button:

Click Get button to read back device ID.

Click Set button to write device ID.

Click Rename button to open the String Table.

For Ethernet 1group, users have to define

Ethernet properties through RS-232 for the

matrix. All the parameters for Ethernet have to

be saved into the matrix by clicking on Write To

Device button.

In the Communication 2group, users can choose

the control interface between matrix and PC

host.

Channel Control

VGA input source selection area

VGA output port selection area

Status indicator

Note

1Initial or any change to Ethernet settings,

users MUST power cycle VGA matrix in

order to get the network settings effective!

2Please notice that Ethernet control has a

higher priority than RS-232. If RS-232 and

Ethernet controls come from 2 different

hosts, commands may coincide and in this

case, commands from Ethernet will be

effective immediately no matter whether

commands from RS-232 are accurately

In the GUI String Table group, click on “Rename” button and assign the captions for

each input and output port for easy recognition.

For example

Rename the Input1 to “Main PC”, Input2 to “Sub PC,” input3 to “PC-3,” … etc., and rename

output1 to “Conf. RM1,” output2 to “Main monitor,” output3 to “Lobby,” output4 to “Main

projector,” … etc.

2. Scan button:

Serial Port Scan

Click Scan button, the machine will scan the all

com port and show them.

Select the RS232 serial port connected to the

machine. And set device ID 255 is for all device.

Only the same device id or 255 can get the

command you sent.

Click OK. Get the new status from the machine

you select.

3. Linkage button:

Click Linkage button to read back all status.

4. Open/Close button:

Click this button to close or open COM port.

Inhaltsverzeichnis

Andere SIIG Matrix-Umschalter Handbücher

SIIG

SIIG AV-GM07U3-S1-V2 Bedienungsanleitung

SIIG

SIIG AV-GM07P3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07J3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07L3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM06Y3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0783-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0823-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07A3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07C3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM06X3-S1 Bedienungsanleitung

SIIG

SIIG MA-1088D Bedienungsanleitung

SIIG

SIIG AV-GM07G3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0843-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0803-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0733-S1 Bedienungsanleitung

SIIG

SIIG AV-GM08G3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07R3-S12 Bedienungsanleitung

SIIG

SIIG AV-GM07M3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07N3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0703-S1 Bedienungsanleitung

SIIG

SIIG CE-H21F11-S1 Bedienungsanleitung

SIIG

SIIG CE-H27Q11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07X3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0743-S1 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung