SIIG AV-GM0783-S1 Bedienungsanleitung

4x4 HDMI & Full 3D support over CAT5

Matrix with IR Pass-through

To avoid EMI issue, complete STP Cat6 cable is strongly recommended!

P/N: AV-GM0783-S1

Safety and Notice

The AV-GM0783-S1 4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through has

been tested for conformance to safety regulations and requirements, and has been certified

for international use. However, like all electronic equipments, the AV-GM0783-S1 should be

used with care. Please read and follow the safety instructions to protect yourself from possible

injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

SPECIFICATIONS..............................................................................................................2

PACKAGE CONTENTS......................................................................................................4

PANEL DESCRIPTIONS.....................................................................................................4

Transmitting unit......................................................................................................4

Receiving unit..........................................................................................................5

DIP SWITCH.......................................................................................................................7

IR PASS-THROUGH...........................................................................................................9

HARDWARE INSTALLATION...........................................................................................10

CONNECTION DIAGRAM ................................................................................................11

OPERATION AND IR CONTROL......................................................................................12

Source Side...........................................................................................................12

Display Side ..........................................................................................................19

EDID LEARNING..............................................................................................................21

IR DISCRETE CODE........................................................................................................22

FAQ ..................................................................................................................................24

NOTICE............................................................................................................................26

WARRANTY .....................................................................................................................27

INTRODUCTION

The AV-GM0783-S1 4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through

provides the most flexible and cost effective solution in the market to route high definition video

sources plus multi-channel (up to 7.1-channel) digital audio from any of the four HDMI sources to

the remote displays at the same time. Through low cost Cat-5/5e/6 LAN cables, not only high quality

video and audio can be transmitted to the display sites, but also users can switch among four HDMI

sources using the push-in button or remote control. With single power design at the source site,

each remote module is easily installed without power supply. Furthermore, the built-in IR extension

function makes users at display site access the DVD player, PS3 or any HDMI supported devices

directly!

FEATURES

●Support HDMI Deep Color & full 3D

●HDCP compliant

●Allows any source to be displayed on multiple displays at the same time

●Allows any HDMI display to view any HDMI source at any time

●Supports 7.1 channel digital audio

●Supports default HDMI EDID and learns the EDID of displays

●The matrix master can switch every output channels to any HDMI inputs by push-in button, IR

remote control, or RS-232 control

●Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from

remote receiver to matrix master

●Allows to control matrix master through IR remote control at remote receiver’s site

●Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI

source device (such as PS3), better grade HDMI display (such as Sony X-series HDTV), and better

quality solid CAT6 cable

●Easy installation with rack-mounting and wall-mounting designs for master and receiver

respectively

●Fast response time –2~5 seconds for channel switch

SPECIFICATIONS

Model Name

AV-GM0783-S1

Technical

MA-5144

MA-5144RX

Role of usage

True 4x4 matrix switcher

Transmitter [TX]

Receiver [RX]

HDMI compliance

HDMI Deep Color & full 3D

HDCP compliance

Yes

Video bandwidth

Single-link 225MHz [6.75Gbps]

Video support

480i / 480p / 720p / 1080i / 1080p60 36-bit color

Audio support

Surround sound (up to 7.1ch) or stereo digital audio

HDMI over CAT5

transmission range

Full HD (1080p): 35m (115ft) [CAT5e] / 40m (130ft) [CAT6]

HD (720p/1080i): 50m (165ft) [CAT5e] / 55m (180ft) [CAT6]

HDMI equalization

N/A

8-level digital rotary control

Input TMDS signal

1.2 Volts [peak-to-peak]

Input DDC signal

5 Volts [peak-to-peak, TTL]

ESD protection

[1] Human body model —±19kV [air-gap discharge] & ±12kV [contact

discharge]

[2] Core chipset —±8kV

PCB stack-up

4-layer board [impedance control —differential 100Ω; single 50Ω]

Input

4x HDMI

1x RS-232

1x RJ-45 TMDS

1x RJ-45 DDC

1x IR socket for IR receiver

Output

4x RJ-45 TMDS

4x RJ-45 DDC

5x IR socket for IR blaster

1x HDMI

HDMI Input

selection

Push-in button / IR remote control /

RS-232 control

Push-in button / IR remote control

HDMI source

control

Controllable via IR pass-through from IR receiver at RX to IR blaster at TX

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 20-60kHz

HDMI connector

Type A [19-pin female]

RJ-45 connector

WE/SS 8P8C with 2 LED indicators

RS-232 connector

DE-9 [9-pin D-sub female]

3.5mm connector

Earphone jack for IR blaster

Earphone jack for IR receiver

[IR Main] IR control on all source

devices

[IR1~IR4] IR control on individual

source device

[IR] Receives IR commands from

remote control

DIP switch

[MA-5144 only]

[SW1~SW4] 2-pin for EDID and audio setting modes

[SW Main] 4-pin operation mode & firmware update

Mechanical

MA-5144

MA-5144RX

Enclosure

Metal case

Dimensions

(L x W x H)

Model

340 x 110 x 44mm [1'1" x 4.3" x

1.7"]

84 x 61 x 24mm [3.3" x 2.4" x 1"]

Package

545 x 230 x 110mm [1'10" x 9.1" x 4.3"]

Carton

580 x 570 x 260mm [1'11" x 1'11" x 10.2"]

Weight

Model

1220g [2.7 lbs]

185g [6.5 oz]

Package

3250g [7.2 lbs]

Fixedness

1U rack-mount with ears

Wall hanging holes

Wall-mount with screws

Power supply

5V 6A DC

Not necessarily required*

Power consumption

20 Watts [max]

1 Watt [max] (provided by MA-5144)

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

* The MA-5144RX has been tested extensively and found that it doesn’t require external

power supply. If in rare situation you find it cannot work with the MA-5144, please use any

+5V power adapter to plug in the power jack and see if it can work. If not, please contact

your technical support for further service.

PACKAGE CONTENTS

●1x MA-5144 ●4x MA-5144RX

●4x IR receiver ●1x IR blaster*

●1x UL AC C13 power cord ●1x DC 5V 6A in-line with C5 power cord

●1x Rack-mounting ear set ●1x IR Remote control*

●1x Installation software CD ●1x User Manual

PANEL DESCRIPTIONS

Transmitting unit ►AV-GM0783-S1-TX

Front Panel

1.Port 1-4 Select: Push-in button for selecting input channel

2.Port 1-4: Input source channels mapping LED for each output channel

3.HP 1-4: Connection status indicator LED for each output channel

4.Input: Input source indicator LED

5.IR: IR receiver

6.Power: Power indicator LED

Rear Panel

* Additional IR remote controllers and IR blasters can be purchased as optional accessories to

control the HDMI sources located separately.

7.ON-OFF: Power ON/OFF

8.RS-232: RS-232 control port

9.+5V DC: 5V DC power jack

10.SW Main: DIP switches

(see DIP Switch section)

11.SW 1-4: DIP switch

(see DIP Switch section)

12.IN 1-4: HDMI inputs

13.IR 1-4: IR extender jacks for individual HDMI source control with IR blasters

14.OUT 1-4: RJ-45 TMDS/DDC outputs for each output channel

15.IR Main: IR extender jack for all HDMI source control [default socket for IR blaster]

Receiving unit ►AV-GM0783-S1-RX

Front Panel

Rear Panel

1.INPUT SELECT: Push button for switching input source channel in sequential order

2.Signal Level 0-7: Adjust the 8-level equalization control to the received HDMI signals. The HDMI

signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from

longest possible range to short distance. Please adjust the signal level from 7 to 0 and stop

turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal

level setting may cause overpowering issue that would shorten the product life significantly!

3.HDMI Output: Connect to HDTV with a HDMI cable

4.+5V DC: Spare power jack for over 60m transmission when the RX may need external power to

work*.

5.A/V SIGNAL: Plug in the CAT5 connected to the respective A/V SIGNAL port on the MA-5144

6.CHANNEL CONTROL: Plug in the CAT5 connected to the respective CHANNEL CONTROL port on

the MA-5144

7.IR RECEIVER: Plug in IR receiver

8.INPUT CHANNEL: Display the current showing HDMI source channel

* The MA-5144RX has been tested extensively and found that it doesn’t require external

power supply. If in rare situation you find it cannot work with the MA-5144, please use any

+5V power adapter to plug in the power jack and see if it can work. If not, please contact

your technical support for further service.

DIP SWITCH

SW1-SW4 for EDID/Audio

DIP Switch Position

Video

Audio

Description

Pin#1

Pin#2

OFF [ ]

Up to 1080p

Surround

Default Mode 1 1–

EDID up to 1080p video & surround sound

audio output up to 7.1ch (DTS-HD Master &

Dolby TrueHD)

OFF [ ]

ON [ ]

Up to 1080p

Stereo 2

Default Mode 2 –

EDID up to 1080p video and stereo audio for

basic compatibility among HDTVs

ON [ ]

OFF [ ]

Up to

720p/1080i

Stereo

Safe Mode 3–

EDID up to 720p/1080i video and stereo audio

for basic compatibility among HDTVs

ON [ ]

Bypass 4

EDID Learning Mode 5–

for learning EDID from the display while

playing any received HDMI audio format

Note

1Factory default setting of [SW1]-[SW4] is pin-1 at OFF []& pin-2 at OFF []for 1080p video

and surround sound audio.

2If the HDTV shows video but without audio, please try to set audio mode to stereo.

3If you encounter any unsolved audio/video output problem during system installation, please

turn any [SW1]-[SW4] to pin-1 at ON []& pin-2 at OFF []for safe mode to select the system

EDID up to 720p(1080i) video and stereo audio for system check. However, the safe mode

cannot be initiated if your HDMI source is set to enforce 1080p output. In this case, please

reconfigure your HDMI source to all resolution output for troubleshooting.

4Bypass means the matrix will maintain playing the original format of HDMI signals in video and

perhaps audio. By setting at this mode, the users may encounter compatibility issue among

different kinds of HDMI sources and displays. If you cannot get the audio and/or video output

normally at the system installation, please changethe DIP switch setting to defaultmode or even

safe mode to verify the functionality of the device.

5To learn the EDID of HDMI display for respective HDMI source devices, please see the [EDID

Learning] section in the next page for more information.

SW MAIN for firmware update (for technical support only)

DIP Switch Position

Pin#1

Pin#2

Pin#3

Pin#4

Normal Operation Mode 6

OFF [ ]

ON [ ]

OFF [ ]

Firmware Update Mode 7

ON [ ]

OFF [ ]

Note

6Factory default for SW Main is pin#1-OFF [], pin#2-OFF [], pin#3-ON [], & pin#4-OFF [].

PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE!

7Sequence for firmware update

[1]. Power off the MA-5144.

[2]. Set the DIP switch position to Firmware Update Mode.

[3]. Power on the MA-5144.

[4]. Power off the MA-5144.

[5]. Set the DIP switch position to Normal Operation Mode.

[6]. Power on the MA-5144.

Inhaltsverzeichnis

Andere SIIG Matrix-Umschalter Handbücher

SIIG

SIIG MA-1088D Bedienungsanleitung

SIIG

SIIG AV-GM0803-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07C3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0743-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0733-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07X3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07U3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07J3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM08F3-S1 Bedienungsanleitung

SIIG

SIIG CE-H23H11-S1 Bedienungsanleitung

SIIG

SIIG CE-H27Q11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM06Y3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM08G3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07A3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0823-S1 Bedienungsanleitung

SIIG

SIIG AV-GM0703-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07G3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07R3-S12 Bedienungsanleitung

SIIG

SIIG AV-GM07P3-S1 Bedienungsanleitung

SIIG

SIIG CE-H21F11-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07M3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM07U3-S1-V2 Bedienungsanleitung

SIIG

SIIG AV-GM07N3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM06X3-S1 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung