Sitecom WL-151 Bedienungsanleitung

Wireless Network 2,4Ghz

PCI Card adapter MiMoXR

WL-151

Quick Installation Guide

1. Software/Hardware Installation

Please install the software before inserting the Wireless adapter in

the system!

Step 1.

1. Insert the installation CD in the CD-ROM drive, open My Computer/CD-ROM drive and run the

setup.exe file located in the ‘Utility’ directory.

2. Click Next to start the installation and follow the instruction on your screen.

3. After the setup wizard has finished remove the CD-ROM and shut down the computer.

Step 2.

1. Insert the WL-151 wireless PCI adapter into a free PCI slot.

2. Start the computer.

Step 3.

1. After Windows has restarted it will detect new hardware (the WL-151).

2. Follow the Windows New Hardware Wizard and let Windows automatically search for the appropriate

drivers.

Note: Windows 98SE users may need the Windows 98SE CD-ROM to complete the

installation.

3. Depending on the Windows version you are using, it is possible you will see a warning concerning the

Microsoft Logo Test.

4. Click ‘Continue anyway’ (Windows XP) or ‘Yes’ (Windows 2000) to complete the installation.

5. When prompted to select your country, select your country and click ‘Next’.

2. Wireless Configuration Peer to Peer (Ad-Hoc)

After installing the software the wireless configuration utility icon will show in the icon

tray.

Sitecom Wireless Utility

The wireless utility icon should be blue if the icon is red then the wireless LAN

configuration is invalid or incomplete. When the wireless utility icon is yellow then the

wireless connection strength is low.

• Please double click on the icon or go to Start/Programs/Wireless Network and click

the Sitecom Wireless Utility.

• Select the 'Profile Setting' tab and click the 'New' button.

• Fill in a Profile Name (i.e. Sitecom) and click 'Next'.

• Fill in the Network Name (i.e. Sitecom), make sure the Network name, also called

SSID, is the same on all wireless adapters.

Set the Network Type to 'Peer to Peer', set the Transfer Rate to 'Automatic' and

choose a Channel. For a Peer to Peer connection the same channel and Network

Name are required. Click 'Next'.

• Leave ‘Security’ unchecked until the wireless connection is established and click

'Next'.

• Enable the 'IP Setting' and click 'Next'.

• Disable the DHCP Status. Set the 'IP Address' (i.e. 192.168.1.1), incrementing the

last digit of the IP Address for each machine. Therefore the IP address of the

second machine should be 192.168.1.2. The 'Subnet Mask' should be the same

(255.255.255.0) for all of the machines. The 'Default Gateway' and the 'DNS

Server' do not have to be filled in. Click 'Next'.

• Click ‘Finish’ to complete the configuration.

• Select the Profile Name and click 'Connect'.

• Check the wireless utility icon in the icon tray and you will see the colour of the

wireless utility icon change, blue means it’s connected.

• Close the wireless utility by clicking the 'X'. The wireless utility will stay visible in

the icon tray.

• Go to chapter 4 to enable File & Printer sharing.

3. Wireless Configuration Infrastructure

After installing the software the wireless configuration utility icon will show in the icon

tray.

Sitecom Wireless Utility

The wireless utility icon should be blue if the icon is red then the wireless LAN

configuration is invalid or incomplete. When the wireless utility icon is yellow then the

wireless connection strength is low.

• Please double click on the icon or go to Start/Programs/Wireless Network and click

the Sitecom Wireless Utility.

• Select the 'Profile Setting' tab and click the 'New' button.

• Fill in a Profile Name (i.e. Sitecom) and click 'Next'.

• Fill in the Network Name (i.e. Sitecom), make sure the Network name, also called

SSID, is the same on all wireless adapters and Access Points.

Set the Network Type to 'Access Point', set the Transfer Rate to 'Automatic' and

click 'Next'.

• Leave ‘Security’ unchecked until the wireless connection is established and click

'Next'.

• Enable the 'IP Setting' and click 'Next'.

• When using a Sitecom Wireless router or other DHCP server in the network, set

DHCP Status to Enable. In all other situations, disable the DHCP Status. Set the

'IP Address' (i.e. 192.168.1.1), make sure the IP address is in the same range as

the Access Point. The 'Subnet Mask' should be the same (255.255.255.0) for all of

the machines. The 'Default Gateway' and the 'DNS Server' do not have to be filled

in. Click 'Next'.

• Click ‘Finish’ to complete the configuration.

• Select the Profile Name and click 'Connect'.

• Close the wireless utility by clicking the 'X'. The wireless utility will stay visible in

the icon tray.

• Go to chapter 4 to enable File & Printer sharing.

Inhaltsverzeichnis

Andere Sitecom PCI-Karte Handbücher

Sitecom

Sitecom WL-112 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung