SMART Smart Board 6055i Bedienungsanleitung

SMARTBoard® 8055i,

8055i-SMP and

8055ie-SMP

Interactive flat panels

User’s guide

Product registration

If you register your SMART product, we’ll notify you of new features and software upgrades.

Keep the following information available in case you need to contact SMARTSupport.

Serial number:

Date of purchase:

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Trademark notice

SMARTBoard, SMART Ink, SMARTNotebook, SMARTMeetingPro, DViT, SMARTGoWire, smarttech, the SMART logo and all SMART taglines are trademarks or

registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other

countries. Windows is either a registered trademark or a trademark of Microsoft Corporation in the U.S. and/or other countries. All third-party product and company names

may be trademarks of their respective owners.

into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice

and does not represent a commitment on the part of SMART.

Patent No. US6320597; US6326954; US6741267; US6803906; US6947032; US6954197; US6972401; US7151533; US7236162; US7411575; US7619617; US7643006;

US7692625; US7755613; US7757001; USD612396; US6563491; US6829372; US7880720; USD612396; USD616462; USD617332; and USD636784. Other patents pending.

06/2012

Important information for your

interactive flat panel

WARNING

lFailure to follow the installation instructions shipped with your SMART product could result in

personal injury and product damage which may not be covered by your warranty.

lDo not open or disassemble the SMART product. You risk electrical shock from the high

voltage inside the casing. Opening the casing also voids your warranty.

lDo not stand (or allow children to stand) on a chair to touch the surface of your SMART

product. Rather, mount the product at the appropriate height.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

lIf your SMART product requires replacement parts, make sure the service technician uses

replacement parts specified by SMARTTechnologies or parts with the same characteristics

as the original.

lEnsure that any cables extending across the floor to your SMART product are properly

bundled and marked to avoid a trip hazard.

lDo not insert objects inside the cabinet ventilation holes, because they could touch

dangerous voltage points and cause electric shock, fire or product damage which may not be

covered by your warranty.

lDo not place any heavy objects on the power cable. Damage to the cable could cause shock,

fire or product damage which may not be covered by your warranty.

lUseonly extension cords and outlets into which this product’s polarized plug can be fully

inserted.

lUse the power cable provided with this product. If a power cable is not supplied with this

product, please contact your supplier. Use only power cables that match the AC voltage of

the power outlet and that comply with your country’s safety standards.

lIf the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass

fragments with care when disposing of them.

lDo not move or mount the interactive flat panel by connecting rope or wire to its handles.

Because the interactive flat panel is heavy, rope, wire or handle failure could lead to personal

injury.

lUse only VESA®-approved mounting hardware.

lDisconnect all power cables for your interactive flat panel from the wall outlet and seek

assistance from qualified service personnel when any of the following occurs:

oThe power cable or plug is damaged

oLiquid is spilled into the interactive flat panel

oObjects fall into the interactive flat panel

oThe interactive flat panel is dropped

oStructural damage such as cracking occurs

oThe interactive flat panel behaves unexpectedly when you follow operating

instructions

C A U T I ON

lBefore you clean your SMART product, shut down or disconnect the computer. Otherwise,

you may scramble the desktop icons or inadvertently activate applications when you wipe

the screen.

lAvoid setting up and using the SMART product in an area with excessive levels of dust,

humidity and smoke.

lMake sure an electrical socket is near your SMART product and remains easily accessible

during use.

lFor SMARTBoard 8055ie-SMPinteractive flat panel only: The external power supply needs

to meet the Limited Power Source (LPS) requirements of CSA/UL/IEC/EN 60950-1, when

required.

lThis SMART product should be used only with European TN and TT power distribution

systems.

It is not suitable for older, IT-type power distribution systems found in some European

countries. "This system (IT-type) is widely used isolated from earth, in some installations in

France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral

not distributed, at 230V line-to-line." (IEC 60950:1999)

Contact qualified personnel if you’re uncertain of the type of power system available where

you’re installing your SMART product.

I M P O R T A N T I N F O R M A T I O N F O R Y O U R I N T E R A C T I V E F L A T P A N E L

lYou must connect the USB cable that came with your SMARTBoard® interactive flat panel

to a computer that has a USB compliant interface and that bears the USB logo. In addition,

the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark

and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid

damage to the SMARTBoard interactive flat panel.

I M P O R T A N T I N F O R M A T I O N F O R Y O U R I N T E R A C T I V E F L A T P A N E L

iii

Contents
Important information for your interactive flat panel i
Chapter 1: About your interactive flat panel 1
Feature highlights 2
Interactive flat panel components 3
Chapter 2: Installing your interactive flat panel 9
Environmental requirements 9
Wall-mounting your interactive flat panel 10
Chapter 3: Connecting computers and peripheral devices 13
Installing the speakers 14
Connecting a room control system 15
Connecting computers to your interactive flat panel 16
Connecting to power and computer 1 17
Installing computer 2 connection 18
Disabling the USB receptacle on the side terminal panel 20
Connecting peripheral devices to your interactive flat panel 21
Chapter 4: Installing SMART software 23
Installing SMARTMeetingPro software 24
Installing SMARTNotebook software 24
Chapter 5: Using your interactive flat panel 27
Turning on and turning off your interactive flat panel 28
Understanding presence detection 29
Using the infrared remote control 30
Getting started with your SMARTBoard interactive flat panel 34
Playing audio files on your interactive flat panel 45
Using the USB receptacle 46
Chapter 6: Using guest laptops with your interactive flat panel 47
Connecting a guest laptop 47
Using a SMARTGoWire cable 48
Connecting computer 2 50
Chapter 7: Maintaining your interactive flat panel 51
Updating your SMART software and firmware 51
Calibrating your interactive flat panel 54
Orienting your interactive flat panel 55
v

Replacing a pen nib 55
Cleaning the screen 56
Cleaning the presence detection sensors 56
Cleaning the camera windows and reflective tape 57
Maintaining ventilation 57
Preventing condensation 58
Checking the interactive flat panel installation 58
Removing your interactive flat panel 58
Transporting your interactive flat panel 60
Chapter 8: Troubleshooting for your interactive flat panel 61
Resolving image issues 61
Resolving touch control and digital ink issues 66
Resolving audio issues 69
Resolving remote control issues 70
Troubleshooting presence detection 70
Resolving issues using the SMART Connection Wizard 72
Resolving issues using SMART Board Diagnostics 73
Appendix A: Adjusting video settings with the on-screen display menu 75
Changing settings in the OSD menu 75
Main menu settings 76
Appendix B: Hardware environmental compliance 81
Waste Electrical and Electronic Equipment regulations (WEEE directive) 81
Restriction of Certain Hazardous Substances (RoHS directive) 81
Batteries 81
Packaging 82
Index 83
C O N T E N T S
vi

Chapter 1: About your interactive flat panel

Feature highlights 2

Commercial-grade, touch-enabled flat panel 2

Elegant, sophisticated design 2

Software 2

Presence detection 2

Dual sketch capabilities 2

SMARTInk™ 2

Touch and gestures 3

Durable surface 3

Interactive flat panel components 3

Front view 3

LCD screen 3

Presence detection 4

Camera and reflective tape channel 4

Pen and eraser holders 4

Color select module 5

Front control panel 5

Infrared remote control 5

Left side view 6

Menu control panel 6

USB receptacle 6

Side terminal panel 6

Back view 7

Bottom terminal panel 7

Inside terminal panel 8

Speaker wire connections 8

Chapter 1

Feature highlights

Commercial-grade, touch-enabled flat panel

Your SMARTBoard 8055i interactive flat panel features SMART’s proprietary DViT® (Digital Vision

Touch) technology on an LCD screen which enables you to select, write and erase on the interactive

surface. It enables you to do everything you can do at your computer—open and close applications,

conference with others, create new documents or edit existing ones, visit websites, play and

manipulate video clips and more—just by touching the interactive surface. Two users can also draw

on the interactive surface at the same time, and you can use an array of gestures within applications.

Elegant, sophisticated design

The professional design and crisp, eye-catching visuals of the SMARTBoard 8055i interactive flat

panel make it perfect for any high-end workspace.

Software

To use all the features of your interactive flat panel described in this guide, go to

smarttech.com/downloads and ensure that you have the latest version of SMART software and

SMART Product Drivers installed on your computer.

Presence detection

The interactive flat panel has two presence detection sensors on its frame that can detect people up

to 16' (5 m) away. When the sensors detect people in the room, the interactive flat panel turns on.

When the sensors no longer detect people in the room, the interactive flat panel turns off.

Dual sketch capabilities

Two people can each pick up a pen and draw on the interactive surface at the same time, providing a

higher degree of interactivity.

SMARTInk™

SMARTInk enables you to write and draw in digital ink over open applications, files, folders,

websites and any other open window on your computer. When you write outside the open windows on

your computer, a SMARTInk Note appears and you can write inside the note.

When you open an application that has its own ink tools, you can turn off SMARTInk, and then use

the application's ink tools to write in the content.

C H A P T E R 1

About your interactive flat panel

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMART Interaktives Whiteboard Handbücher

SMART

SMART Board 685ix Bedienungsanleitung

SMART

SMART SmartBoard 600 Series Bedienungsanleitung

SMART

SMART SMART Board 885-SMP Bedienungsanleitung

SMART

SMART 880i5-SMP Bedienungsanleitung

SMART

SMART 8055i Bedienungsanleitung

SMART

SMART KAPP IQ Installationsanleitung

SMART

SMART SBID-7286 Bedienungsanleitung

SMART

SMART SBX885 Bedienungsanleitung

SMART

SMART Board 800 Series Bedienungsanleitung

SMART

SMART Board 600 Series Bedienungsanleitung

SMART

SMART SBM600i6 Bedienungsanleitung

SMART

SMART Podium ID422w Bedienungsanleitung

SMART

SMART M600i6 Bedienungsanleitung

SMART

SMART SMART Board Bedienungsanleitung

SMART

SMART Board 600i3 Bedienungsanleitung

SMART

SMART 600i Bedienungsanleitung

SMART

SMART FS640 Bedienungsanleitung

SMART

SMART 2000i-DVS Bedienungsanleitung

SMART

SMART SPNL-6065 Bedienungsanleitung

SMART

SMART Room System Betriebsanleitung

SMART

SMART Board E70 Betriebsanleitung

SMART

SMART kapp iQ 55 Service-Handbuch

SMART

SMART Table 230i Installationshandbuch

SMART

SMART Board 600i4 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung

Genee

Genee 56" Bedienungsanleitung