Sola Go! SMART Bedienungsanleitung
HU
BG
Gebrauchsanweisung
Operating instructions
Manuel d’instructions
Instruzioni d‘uso
Instrucciones de uso
Gebruiksaanwijzing
Руководство по применению
Instrukcja obsługi
Eksploatacijos instrukcija
Lietošanas instrukcija
Uputstvo za upotrebu
Návod k použití
Manual de utilizare
Ръководство за употреба
Használati útmutató
GO! smart
2
EN
Contents included with Go! SMART
1. GO! smart
2. AA battery
3. Quick start guide
4. Belt pouch
1.
3.
4.
2.
3
EN
Operating manual
GO! smart (original version)
About this manual
Congratulations on the purchase of your new GO! smart!
You have acquired a SOLA measuring tool, which can make your work easier, faster and more precise. To
utilize the complete functionality range of this measurement instrument, and to ensure a safe operation,
please observe the following instructions:
• Please read this operating manual before starting to use the device.
• Always keep the operating manual near the device.
• If you let others use your device, please give them the device with the operating manual.
• Never render the attached warning signs unreadable.
Content
1. General information
2. Description
3. Technical data
4. Safety instructions
5. Getting Started
6. Operation
7. Calibration and adjustment
8. Maintenance, storage and transportation
9. Delivery contents and accessories
10. Troubleshooting
11. Disposal
12. Manufacturers’s warranty
13. EC conformity declaration
4
EN
1.1 Signal words and their meaning
DANGER
For an imminent danger that could lead to serious
injury or death.
WARNING:
For a possibly dangerous situation that could lead
to serious injury or death.
CAUTION
For a possibly dangerous situation that could lead
to slight injury or property damage.
NOTE:
For application notes and other useful information.
1.2 Pictograms and other information
1.2.1 Warning signs
Warning of dangers in general
1. General information
1.2.2 Symbols
Read the operating
manual before use
Batteries and devices must not be
disposed of with household waste
Do not throw batteries into the fire
Do not heat the battery
above 60 °C.
5
EN
5
2. Description
1. On/O switch
2. Hold function (measurement is retained by pressing once) / Toggling between ABS (absolute)
and INC (incremental)
3. Mode button for switching between measured value settings (°, mm/m, %, in/ft)
4. Calibration
5. Changing the display resolution
1.
2. 5.
4.
3.
6
EN
3. Technical data
Gradient module
Max. measurement tolerance
-0° – 90° ± 0.05°
-1° - 89° ± 0.20°
Protection class IP 54
Power supply 1 x AA battery
Battery life (at 20°C) 65h (if display light switched o, approx. 80h)
Permissible temperatures
Operating temperature -10°C to +50°C
Storage temperature -20 °C to +60 °C
7
EN
4. Safety Instructions
4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for delivering a safe and immaculate product, including the operating manual and
original accessory equipment.
SOLA-Messwerkzeuge GmbH
Unteres Tobel 25
A-6840 Götzis
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of personnel,
their training and the operational safety of the product.
The operator understands the safety information which is stated on the product and the instructions in
the operating manual.
The operator shall comply with the standard local regulations relating to safety and accident prevention
regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits (see Chapter 3/Technical data).
Use under extreme temperature fluctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The Go! Smart is suitable for continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
KESON LLC
810 N. Commerce St.
Aurora, Illinois 60504
8
EN
4.4 Usage Hazards
4.4.1 General
WARNING
Missing or incomplete instructions may result in improper or incorrect use. This can cause
accidents with serious damages to persons, property, assets and the environment.
Follow the manufacturer’s and operator’s safety instructions.
Protect equipment and accessories from being accessed by children.
CAUTION
A fall, longer storage, transportation or other mechanical eects can lead to erroneous
measurement results. Check the unit for damage before use.
Do not use damaged equipment.
Repairs must only be performed by SOLA.
Before use, check the accuracy of the device
(see Chapter 8/Checking the accuracy).
4.4.2 Charger/batteries/rechargeable batteries
DANGER
Mechanical damage can cause batteries to leak, explode or catch fire or trigger the release
of toxic substances.
Batteries and rechargeable batteries must not be opened or exposed to mechanical loads.
Damaged batteries, chargers and charging stations may not be used.
Repairs must only be performed by SOLA.
Inform the local safety authorities and safety experts before working in hazardous environments, in
close proximity to electrical installations or similar surroundings.
WARNING
High ambient temperatures and immersion into liquids can cause a leakage, fire or explosion
of the batteries or trigger the release of toxic substances.
Protect batteries and rechargeable batteries from mechanical damage during transport.
Do not overheat batteries and rechargeable batteries or expose them to fire.
9
EN
WARNING
If disposed of improperly third parties can possibly be seriously injured and the environment
polluted. The burning of plastic components generates toxic fumes which may impair the
health of people. Batteries/rechargeable batteries may explode if they are damaged or heated
excessively, and thereby cause poisoning, burning, corrosion or environmental contamination.
If disposed of negligently unauthorized persons are able to use the product improperly.
The product may not be disposed of together with household waste. Dispose of the device
and accessories properly
(see Chapter 12/Disposal)
.
Protect the product against access by unauthorized persons at all times, and
especially children.
Avoid the ingress of moisture into batteries and rechargeable batteries.
Do not use damaged batteries or rechargeable batteries. Perform a proper disposal
(see Chapter 12/Disposal).
WARNING
A short-circuit or unintended use can cause batteries to overheat and create an injury
or fire hazard.
Do not transport or store batteries in the pockets of garments.
Do not bring the battery contacts in contact with jewellery, keys, or other electrically
conductive objects.
Do not charge non-rechargeable batteries.
Do not discharge the batteries through short-circuiting.
Do not solder the batteries in the device.
Do not mix old and new batteries, and do not mix batteries from dierent manufacturers or with a
diering type designation.
10
EN
4.5 ELECTROMAGNETIC COMPATIBILITY (EMC)
The electromagnetic compatibility is the ability of the product to function in an environment where
electromagnetic radiation and electrostatic discharge are present, without causing electromagnetic
interference to other devices.
4.5.1 Interference of other devices by Go! smart
Although the product meets the strict requirements of the relevant directives and standards, SOLA cannot
completely exclude the possibility of interference with other devices (for example, when using the product
in combination with third-party devices, such as field computers, personal computers, wireless devices,
mobile phones, certain cables or external batteries).
When using computers and radio equipment, make sure to observe to the vendor-specific
information about electromagnetic compatibility.
Only use original SOLA equipment and accessories.
4.5.2 Interference with the Go! smart by other devices
Although the product meets the strict requirements of the relevant directives and standards, SOLA cannot
entirely exclude the possibility that intense electromagnetic radiation in the immediate vicinity of radio
transmitters, two-way radios, diesel generators, etc. may distort the measurement results.
When performing measurements under these conditions, check the plausibility of the results.
4.6 FCC statement
WARNING:
The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. The following two conditions apply for operation:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE:
This device has passed the compliance test for limits for a digital class B device as per Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Inhaltsverzeichnis
Andere Sola Messgerät Handbücher
Sola
Sola FCL Bedienungsanleitung
Sola
Sola METRON 60 BT Bedienungsanleitung
Sola
Sola PROTON Series Bedienungsanleitung
Sola
Sola CROSSLINE GREEN Bedienungsanleitung
Sola
Sola METRON 80 BTC Bedienungsanleitung
Sola
Sola METRON 30 BT Bedienungsanleitung
Sola
Sola VECTOR 40 Bedienungsanleitung
Sola
Sola HORIZON GREEN BASIC Bedienungsanleitung
Sola
Sola VECTOR 40 Bedienungsanleitung
Sola
Sola QUBO Bedienungsanleitung
