Sola METRON 30 BT Bedienungsanleitung
HU
BG
Gebrauchsanweisung
Operating Instructions
Manuel d'instructions
Instruzioni d'uso
Instrucciones de uso
Gebruiksaanwijzing
Руководство по применению
Instrukcja obsługi
Eksploatacijos instrukcija
Lietošanas instrukcija
Uputstvo za upotrebu
Návod k použití
Manual de utilizare
Ръководство за употреба
Használati útmutató
METRON 30 BT
2
DE
METRON 30 BT Delivery Contents
1. Laser distance meter
2. Belt pouch
3. Strap
4. 2 x 1.5 V (AAA) batteries
1.
4.
2.
3.
3
DE
2.1 Function Buttons
2.2 Display
1.
6.
7.
3.
4.
1.
2.
9.
8.
2.
3.
5.
4
DE
Operating Instructions
METRON 30 BT Laser Distance Meter (original version)
About this Manual
Congratulations on the purchase of your new METRON 30 BT! You have acquired a SOLA measurement
device, which can make your work easier, faster, and more precise.
To utilize the complete functionality range of this measurement device, and to ensure a safe operation,
please observe the following instructions:
• Please read these operating instructions before commissioning the device.
• Always keep the operating instructions near the device.
• Only hand over the device to other persons together with the operating instructions.
• Never render the attached warning signs unreadable.
Contents
1. General Information
2. Description
3. Technical Data
4. Safety Instructions
5. Laser Safety / Classication
6. Getting Started
7. Operation
8. Maintenance, Storage, and Transportation
9. Delivery Contents and Accessories
10. Troubleshooting
11. Disposal
12. Manufacturer’s Guarantee
13. EC Declaration of Conformity
5
DE
1.1 Signal Words and their Meaning
DANGER
For an imminent danger that could lead to serious
injury or death.
WARNING
For a possibly dangerous situation that could lead
to serious injury or death.
CAUTION
For a possibly dangerous situation that could lead
to slight injury or property damage.
NOTE
For application notes and other useful information.
1.2 Pictograms and Other Information
1.2.1 Warning Signs
Warning of dangers in general
1. General Information
1.2.2 Symbols
Read the operating
instructions before use
Batteries and devices may not be
disposed of with household waste
Do not throw battery into the re
Do not heat battery above 60°C
Class 2 laser device
Do not look into the laser beam!
6
DE
2. Description
2.3 Intended Use
The device is designed to measure distances. The display shows the measurement, the setting, as well
as the device status.
An emitted laser beam is directed towards a reective surface and sent back to the laser distance meter.
This allows the distance to be determined. The range depends on the model of the laser distance meter,
the reectivity, and the quality of the reective surface.
2.1 Function Buttons
1. ON/measure button
2. Function button/measuring edge
3. OFF/delete button
2.2 Display
1. Measurements
2. Measurement display
3. Battery status
4. Measuring edge
5. Laser point display
6. Function display
7. Min./max. display
8. Unit
9. Area/space display
7
DE
3. Technical Data
3.1 General
Measuring range 0.05–30m*
Accuracy ± 2.0mm**
Protection class IP54
Laser class 2
Laser type 630–670nm < 1mW
Automatic power off, laser 45s
Automatic power off, device 180s
Operating time up to 5,000 measurements***
Battery type 2 x 1.5 V (AAA) batteries
Operating temperature 0–40°C
Storage temperature -20–60°C
Tripod connection -
Dimensions (H x W x D) 105 x 47 x 27
Weight with batteries 100 g
*For measurements with 100% reectivity of the target (e.g. a wall painted white), low background lighting, and 25°C operating temperature.
Measurements may become less accurate in adverse conditions, such as direct sunlight, a poorly reective surface, or measurement on
glass or glossy surfaces, leading to measurement errors.
The visibility range of the laser point depends on the ambient conditions.
**Accurate from 0.05–10m. The maximum tolerance of 0.1mm/m may deteriorate at distances between 10m and 30m.
***Use at room temperature.
3.2 Functions
Length measurement
Min./max. measurement
Continuous measurement
Area measurement
Volume measurement
Indirect 2-point measurement
8
DE
8
4. Safety Instructions
4.1 Area of Responsibility
4.1.1 Manufacturer
SOLA is responsible for the safe delivery condition of the product, including the operating instructions
and the original accessories.
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of person-
nel, their training, and the operational safety of the product.
The operator understands the safety information which is stated on the product and
the instructions in the operating instructions.
The operator shall comply with the standard local regulations relating to safety and accident preven-
tion regulations as well as worker protection laws and regulations.
The operator shall immediately notify SOLA if safety-related issues should arise relating to the product
or during its utilization.
The operator shall ensure that the product is not utilized any further if defects become evident, and
they will have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits
(see Chapter3/Technical Data)
.
Use under extreme temperature fluctuations without adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modifications or alterations to the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization Limitations
The METRON 30 BT is suitable for continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
Inform the local safety authorities and safety experts before working in hazardous environments, in
close proximity to electrical installations or similar surroundings.
9
DE
4.4 Usage Hazards
4.4.1 General
WARNING
Missing or incomplete instructions may result in improper or incorrect use. This can cause
accidents with serious damage to persons, property, assets, and the environment.
Follow the manufacturer’s and operator’s safety instructions.
Protect equipment and accessories from being accessed by children.
WARNING
Blinding by laser radiation can indirectly lead to serious accidents, especially for people who
are driving a vehicle or operating machinery. Do not look into the laser beam.
Do not set up the laser beam and the laser plane at eye level or aim at people.
CAUTION
A fall, longer storage, transportation, or other mechanical eects can lead to erroneous mea-
surement results. Check the unit for damage before use. Do not use damaged equipment.
Repairs must only be performed by SOLA.
4.4.2 Batteries
DANGER
Mechanical damage can cause batteries to leak, explode, or catch fire or trigger the release of
toxic substances.
Batteries and rechargeable batteries must not be opened or exposed to mechanical loads.
Repairs must only be performed by SOLA.
10
DE
WARNING
High ambient temperatures and immersion into liquids can cause batteries to leak, explode, or
catch fire or trigger the release of toxic substances.
Protect batteries and rechargeable batteries from mechanical damage during transport.
Do not overheat batteries and rechargeable batteries or expose them to fire.
Avoid the ingress of moisture into batteries and rechargeable batteries.
Do not use damaged batteries or rechargeable batteries. Perform a proper disposal
(see Chapter 11/Disposal)
.
WARNING
Short-circuiting or improper use can cause batteries to overheat and create an injury or
fire hazard.
Do not transport or store batteries in the pockets of garments.
Do not bring the battery contacts in contact with jewelry, keys, or other electrically conductive objects.
Do not charge the batteries.
Do not discharge the batteries through short-circuiting.
Do not solder the batteries in the device.
Do not mix old and new batteries, and do not mix batteries from dierent manufacturers or with a
diering type designation.
WARNING
If disposed of improperly third parties may possibly be seriously injured and the environ-
ment polluted. Burning plastic components generates toxic fumes which may impair health.
Batteries/rechargeable batteries may explode if they are damaged or heated excessively, and
thereby cause poisoning, burning, corrosion, or environmental contamination. If disposed of
negligently, unauthorized persons are able to use the product improperly.
The product must not be disposed of together with household waste. Dispose of the device and
accessories properly
(see Chapter 11/Disposal)
.
Protect the product against access by unauthorized persons at all times, especially children.
Inhaltsverzeichnis
Andere Sola Messgerät Handbücher
Sola
Sola METRON 80 BTC Bedienungsanleitung
Sola
Sola METRON 60 BT Bedienungsanleitung
Sola
Sola CROSSLINE GREEN Bedienungsanleitung
Sola
Sola METRON 60 BT Bedienungsanleitung
Sola
Sola VECTOR 40 Bedienungsanleitung
Sola
Sola QUBO Bedienungsanleitung
Sola
Sola PROTON Series Bedienungsanleitung
Sola
Sola HORIZON GREEN BASIC Bedienungsanleitung
Sola
Sola Go! SMART Bedienungsanleitung
Sola
Sola FCL Bedienungsanleitung
