Sola QUBO Bedienungsanleitung
Gebrauchsanweisung
DE
Operating instructions
EN
Manuel d’instructions
FR
Instruzioni d‘uso
IT
Instrucciones de uso
ES
Gebruiksaanwijzing
NL
Руководство по применению
RU
Instrukcja obsługi
PL
Eksploatacijos instrukcija
LT
Lietošanas instrukcija
LV
Uputstvo za upotrebu
SR
Návod k použití
CZ
QUBO 1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
10.1 Lieferumfang QUBO BASIC
1 Linien- Punktlaser QUBO
2 Batterieadapter BA
3 Batterien Mignon (AA)
4 Trockenbauadapter TBA
5 Gerätetasche klein
10.2 Lieferumfang QUBO PROFESSIONAL
1 Linien- Punktlaser QUBO
2 Batterieadapter BA
3 Batterien Mignon (AA)
4 Trockenbauadapter TBA
5 SOLA-Li-Ion Akku 5.2
6 Li-Ion Ladestation LST Li-Ion
7 Li-Ion Ladegerät LG Li-Ion
8 Länderstecker EU/UK LS-EU / LS-UK
9 Lasersichtbrille rot LB RED
10 Magnetische Zielscheibe ZS RED
11 Gerätetasche groß
2.1.1 QUBO
1
2
8
6
7
4
53
2.1.3 SOLA Li-ion Akku, Ladestation und Ladegerät
6
7
4
12
2
8
5
1
2
3
9
10
11
3
2.1.2 Trockenbauadapter TBA
4
2
5
3
1
EN
30
Operating manual
QUBO Line/Point Laser (German original version)
About this manual
Congratulations on the purchase of your new QUBO! You have acquired a SOLA measurement instru-
ment, which can make your work easier, faster and more precise. To utilize the complete functionality
range of this measurement instrument, and to ensure a safe operation, please observe the following
instructions:
• Please read these operating manual before starting to use the device.
• Always keep the operating manual near the device.
• Only hand over the device to other persons together with the operating manual.
• Never render the attached warning signs unreadable.
Contents
1. General information
2. Description
3. Technical data
4. Safety instructions
5. Laser safety / classication
6. Startup
7. Operation
8. Checking the accuracy
9. Maintenance, storage and transportation
10. Scope of delivery and accessories
11. Troubleshooting
12. Disposal
13. Warranty
14. EC conformity declaration
EN
31
1.1 Signal words and their meaning
DANGER
For an imminent danger that could lead to serious
injury or death.
WARNING
For a possibly dangerous situation that could lead
to serious injury or death.
CAUTION
For a possibly dangerous situation that could lead
to slight injury or property damage.
NOTE
For application notes and other useful information
1.2 Pictograms and other information
1.2.1 Warning signs
Warning of dangers in general
1. General information
1.2.2 Symbole
Read instructions before use
Batteries and devices may not be
disposed of with household waste
Do not throw batteries into the re
Warning label on packages with
Li-Ion batteries
Warning signs on battery Do not
heat the battery above 60 °C.
Class 2 laser device
Do not look into the laser beam!
EN
32
2.1.1 QUBO
1. Laser beam window
2. On/off switch, transport lock
3. Status/battery voltage display «BATT-ON»
4. Operating modes button «MODE»
5. Operating mode «PULSE»
6. Tripod adapter 1/4“
7. Battery compartment cover
8. Plumb point beam window
2.1.2 Drywall adapter TBA
1 Tripod thread 5/8” and 1/4“
2 Nd magnet for drywall tracks
3 Holding xture for QUBO
4 Opening for plumb point
5 exible 360° adjustment
2.1.3 SOLA Li-Ion battery, charging station
and charger
1. Li-Ion battery SOLA-Li-Ion-Akku 5.2
2. Battery contacts
3. Technical Specications/certication label
4. Li-Ion charging station
5. Charging connector for the Li-Ion battery
charging station
6. Li-Ion charging station
7. Charging cable
8. Charger plug
9. Operation indicator
10. Connection socket for the country-specic plug
11. Release button for the country-specic plug
12. Country-specic plug
2. Description
2.1 Device components, display and operating elements
EN
33
2.2 Intended use
The QUBO is a Line/Point Laser that enables a single person to level and align plumb points as well as
90 degree angles horizontally and vertically.
The device is designed to be preferably used indoors. For outdoor applications, it must be ensured that
the ambient conditions are similar to those indoors.
The visibility range of the laser lines depends on the ambient conditions.
In low light conditions or for long distances, the REC LRD0 hand-held receiver can be used to locate the
laser line position (the REC LRD0 hand-held receiver is not included in the standard delivery, but can be
ordered as an option).
Follow the instructions contained in this manual. The device and accessory equipment may be a source
of danger if they are utilised improperly or inappropriately by persons who are not adequately instructed.
EN
34
3. Technical data
3.1 Line/Point Laser QUBO
Application area *
- Laser lines
- Receiver
r = 20 m*
r = 80 m*
- Max. Measurement tolerance
- Laser line
- Plumb point
± 0.2 mm/m
± 0.3 mm/m
Protection class IP54
Cross angle 90°
Levelling range (typical) ± 4°
Levelling time (typical) ≤ 5 s
Power supply 3 x 1.5V mignon (AA) batteries / SOLA Li-Ion battery 5.2
Operating time (at 20 °C)
- Mignon (AA) batteries
- SOLA Li-Ion battery 5.2
12 h
28 h
permissible temperatures
Operating temperature
Storage temperature
-10 °C to +50 °C
-20 °C to +60 °C
Laser diode lines/points 635 / 650 nm < 1 mW
Laser class 2, DIN EN 60825-1 : 2008
Tripod adapter ¼"
Weight without battery 550 g
Dimensions 115 × 103 × 135 mm
*… depending on the environmental conditions at the workplace. | Changes (drawings, descriptions and technical data) are reserved.
EN
35
3.2 SOLA Li-Ion battery 5.2
Type Li-Ion with protective electronics
Cells 2 × ICR 18650 parallel
Capacity 5200 mAh
Voltage 3.6 VDC
Performance 28 Wh
permissible temperatures
Operating temperature
Storage temperature (ideal)
-10 °C to +50 °C
-20 °C to +60 °C (ideal +20 °C to +25 °C)
Charging temperature 0 °C to +45 °C (ideal +20 °C to +25 °C)
Humidity 65 ± 20 %
Charging time 3 – 5 h
Weight 100 g
Dimension 71 × 39 × 22 mm
3.3 SOLA charger LG Li-Ion
Nominal input voltage 100 – 240 VAC/50 – 60 Hz
Nominal input current 0.4 A @ 100 VAC - 0.2 A @ 240 VAC under maximum load
Nominal input power 21 Wrms under maximum load
Output voltage 3.6 VDC
Charging current 3000 mA
Ambient temperature -10 °C - +50 °C
Protection class IP40
Power consumption during standby ≤ 0.3 W @ 100 VAC / ≤ 0.5 W @ 240 VAC
EN
36
4. Safety instructions
4.1 AREA OF RESPONSIBILITY
4.1.1 Manufacturer
SOLA is responsible for the safe delivery condition of the product, including the operating manual and the
original accessories.
4.1.2 Operator
The operator is responsible for using the product as intended, the deployment of his personnel, their
training and the operational safety of the product.
He understands the safety information which is stated on the product and
the instructions which are contained in the operating manual.
He shall comply with local regulations relating to safety and accident
prevention regulations as well
as worker protection laws and regulations.
He shall immediately notify SOLA if safety-related issues should develop on the product or during
its utilization.
He shall ensure that the product is not utilized any further if defects become evident, and he will
have the product repaired professionally.
4.2 Improper Use
Use of the device and the accessories without instruction.
Use of third-party accessories or additional equipment.
Use outside of the intended limits
(see Chapter 3/Technical data)
.
Use under extreme temperature uctuations without an adequate acclimatization.
Disabling of safety devices and removal of hazard notices and labels.
Unauthorized opening of the device.
Performance of modications or alterations the device or the accessories.
Deliberate blinding of third parties.
Inadequate safeguarding at the installation site.
4.3 Utilization limitations
The QUBO is suitable for a continuous use in an atmosphere which can be inhabited by humans.
Do not operate the product in explosion-prone or corrosive environments.
Inform the local safety authorities and safety experts before working in hazardous environments,
in close proximity to electrical installations or similar surroundings.
EN
37
4.4 Usage Hazards
4.4.1 General
WARNING
Missing or incomplete instructions may result in improper or incorrect use. This can cause
accidents with serious damages to persons, property, assets and the environment.
Follow the manufacturer‘s and operator‘s safety instructions.
Protect equipment and accessories from access through children.
WARNING
Blinding by laser radiation can indirectly lead to serious accidents, especially for people who
are driving a vehicle or operating machinery.
Do not look into the laser beam.
Do not set up the laser beam and the laser plane at eye level or aim at people.
CAUTION
A fall, longer storage, transportation or other mechanical effects can lead to
erroneous measurement results. Check the unit for damage before use.
Do not use damaged equipment.
Repairs have to be exclusively performed by SOLA
Before use, check the accuracy of the device
(see Chapter 8/Checking the accuracy)
4.4.2 Charger/batteries/rechargeable batteries
DANGER
There is a risk of mortal danger from electric shock.
Never open the SOLA Li-Ion battery charger or charging station.
Only use the SOLA Li-Ion battery charger and charging station in dry places and do not bring them
into contact with liquids.
DANGER
Strong mechanical inuences, can lead to a leakage, re or explosion of the batteries or trigger
the release of toxic substances.
Inhaltsverzeichnis
Andere Sola Messgerät Handbücher
Sola
Sola METRON 80 BTC Bedienungsanleitung
Sola
Sola Go! SMART Bedienungsanleitung
Sola
Sola VECTOR 40 Bedienungsanleitung
Sola
Sola METRON 30 BT Bedienungsanleitung
Sola
Sola FCL Bedienungsanleitung
Sola
Sola METRON 60 BT Bedienungsanleitung
Sola
Sola CROSSLINE GREEN Bedienungsanleitung
Sola
Sola VECTOR 40 Bedienungsanleitung
Sola
Sola PROTON Series Bedienungsanleitung
Sola
Sola METRON 60 BT Bedienungsanleitung
