Soleus Air HM1-10-32 Bedienungsanleitung

Ultra Thin

Micathermic Heater

OWNER’S MANUAL

Model # HM1-10-32

PLEASE SAVE THESE INSTRUCTIONS

WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.

ULTRA THIN MICATHERMIC HEATER

Thank you for choosing a Soleus Air heater. This owner’s manual will provide you with valuable

information necessary for the proper care and maintenance of your new product. Please take a

few moments to thoroughly read the instructions and familiarize yourself with all the operational

aspects of your new heater.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the

store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

When using this electric unit, basic safety precautions should always be followed to reduce the

risk of fire, electric shock, and injury to persons, including the following:

1. Read ALL instructions before using this unit.

2. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself.

3. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot

surfaces. If provided, use handles when moving this heater.

4. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and

curtains at least 3 ft from the front of the heater and keep them away from the sides, top,

and rear. DO NOT place towels or other objects on the heater.

5. Extreme caution is necessary when any heater is used by or near children or the disabled,

or when the heater is left operating and unattended.

6. DO NOT operate any heater with a damaged cord or after the heater malfunctions, has

been dropped or damaged in any manner. Return heater to authorized service facility for

examination, electrical or mechanical adjustment, or repair.

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. NEVER locate heater where it may fall into a bathtub or other water container.

To protect against electrical hazards, DO NOT immerse in water or other liquids.

8. DO NOT touch the control panel or plug with a wet hand.

9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or

similar coverings. Arrange cord away from traffic area and where it will not be tripped

over.

10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as

this may cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO

NOT use on soft surfaces, like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where

gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away

from heated surfaces and open flames.

13. Avoid the use of an extension cord because the extension cord may overheat and cause a

risk of fire. However, if you have to use an extension cord, the cord shall be No. 16

AWG minimum size and rated not less than 1500W.

14. To avoid fire or shock hazard, plug the unit directly into a 115 V AC electrical outlet.

15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on

the plug, DO NOT unplug by pulling on the cord.

16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use.

17. Use only for intended household use as described in this manual. Any other use not

recommended by the manufacturer may cause fire, electric shock, or injury to persons.

The use of attachments not recommended or sold by unauthorized dealers may cause

hazards.

18. Always use on a dry, level surface. Use on floor only.

19. DO NOT use outdoors.

20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any

solid-state speed control device.

21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit.

Doing so will void your warranty. The inside of the unit contains no user serviceable

parts. Qualified personnel should perform all servicing only.

22. Connect to properly grounded outlets only.

23.SAVE THESE INSTRUCTIONS.

WARNING: This heater has a voltage rating of

120 volts. The cord has a plug as shown in A. An

adapter as shown in C is available for connecting

three-blade grounding-type plugs to two-slot

receptacles. The grounding lug extending from

the adapter must be connected to a permanent

ground such as a properly grounded outlet box.

The adapter should not be used if a three-slot

grounded receptacle is available.

DO NOT DEFEAT THE SAFETY PURPOSE

OF THE GROUNDED PLUG.

SPECIFICATIONS

Voltage Rating 120 V (60Hz)

Power Consumption 500/1000W

Unit Size 18 in. (W) x 8 5/8 in. (D) x 26 in. (H)

Unit Weight 8.8 lbs

PRODUCT DIAGRAM

Wheel

Wheel Base

Control Panel

Handle

ASSEMBLY

1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box.

Remove the packaging materials and keep for future storage.

2. Attach the wheels to each wheelbase with the supplied wheel screws, small black spring-

washers, and small grey washers.

3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the

floor upside down.

4. Attach a wheel base (with wheels attached) to each end of the heater body using the

supplied standard screws, large black spring-washers, and large grey washers.

Wheel Base

Large Grey Washer

Large Black Spring-Washer

Standard Screw

Wheel

Wheel Screw

Small Black Spring-Washer

Small Grey Washer

Wheel Base

Heater Body

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only

operate heater in upright position with caster wheels attached. Two controls dials; one to select

the power setting, and the other to select the desired temperature.

Power Indicator Light

Power Select Dial

Set Temperature Dial

1. Select a heat setting.

For LOW heat (500W), turn the POWER SELECT dial until it is aligned with LOW.

For HIGH heat (1000W), turn the POWER SELECT dial until it is aligned with HIGH.

For ECO Mode, turn the POWER SELECT dial until it is aligned with ECO.

ECO mode is an Economic Energy Saving Function - When the room temperature

reaches a certain point, the ECO mode will reduce the power consumption by 1/3 to

automatically to save energy.

2. Turn the thermostat control (SET TEMP. dial) clockwise as far as it will go. The

indicator light will light-up when the thermostat is set above the current room

temperature.

3. Leave the thermostat control at its maximum setting until the desired temperature is

reached. Carefully lower the thermostat control by turning counter-clockwise until the

heater stops operating. The indicator light will shut off.

4. Leave thermostat control at this position. The heater will automatically cycle on and off

to maintain the chosen room temperature. The indicator lights will also turn and off to

indicate when the heater is operating.

5. Unplug the heater when not in use.

NOTE: For safety, if the heater’s internal temperature rises above a certain point, the heater

is designed to automatically shut off. To restart the heater in this situation:

1. Turn the POWER SELECT dial to OFF, and set the thermostat control to LOW.

2. Unplug the power cord from the outlet and allow the heater to cool for at least 10

minutes.

3. Plug the power cord back into the outlet and select the desired heat setting.

WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit

between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting

the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for

damage.

MAINTENANCE

1. Unplug the unit and let it cool completely.

2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You

may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.

CAUTION: DO NOT let liquid enter the heater.

3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to

clean the heater. This may cause damage or deterioration to the surface of the heater.

4. DO NOT immerse the heater in water.

5. Wait until the unit is completely dry before use.

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the

original packaging to repack the unit.

TROUBLESHOOTING

If the heater will not operate, please check the following before seeking repair of service:

1. Check if the power cord is plugged into an electrical outlet, if not, plug in.

2. Check if electricity to the main fuse is working.

3. Make certain the power switches are turned on. If not, choose a setting. Make certain the

thermostat control is turned on.

NOTE: The heater may not be operating if the thermostat control is set higher than the

room temperature. To begin operation, turn thermostat control clockwise for a higher heat

setting.

WARRANTY

One Year Limited Warranty

Soleus International Inc. warrants the accompanying Soleus Air HM1-10-32 to be free of defects in

material and workmanship for the applications specified in its operation instruction for a period of ONE

(1) year from the date of original retail purchase in the United States.

If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or

replace it, free of charge within a reasonable time after the unit is returned during the warranty period.

As a condition to any warranty service obligation, the consumer must present this Warranty Certificate

along with a copy of the original purchase invoice.

THIS WARRANTY DOES NOT COVER:

1) Damage, accidental or otherwise, to the unit while in the possession of a consumer not caused by

a defect in material or workmanship.

2) Damage caused by consumer misuse, tampering, or failure to follow the care and special handling

provisions in the instructions.

3) Damage to the finish of the case, or other appearance parts caused by wear.

4) Damage caused by repairs or alterations of the unit by anyone other than those authorized by

Soleus International Inc.

5) Freight and Insurance cost for the warranty service.

ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE

LIMITED TO ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS

INTERNATIONAL INC. DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR

INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC’S

LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN OR

IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.

This warranty covers only new products purchased from our authorized dealers or retailers. It does not

cover used, salvaged, or refurbished products.

As some states do not allow the limitation or exclusion of incidental or consequential damages, or do not

allow limitation on implied warranties, the above limitations and exclusions may not apply to you. This

warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

For Warranty, Technical Support, Customer Service, Missing or Defective Parts

Please Call (888) 876-5387

Or Write To:

Soleus International Inc.

9451 Telstar Ave.

El Monte, CA 91731 USA

www.soleusair.com

Andere Handbücher für HM1-10-32

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air HCC-W08ES-A1 Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air PE2-08R-62 Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-10ESE-C Bedienungsanleitung

Soleus Air

Soleus Air PH1-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PSX-08-01 Bedienungsanleitung

Soleus Air

Soleus Air TTWM1-10-01 Bedienungsanleitung

Soleus Air

Soleus Air 3046364 Bedienungsanleitung

Soleus Air

Soleus Air KFHIP-09-OD Technisches Datenblatt

Soleus Air

Soleus Air PH4-13R-01 Bedienungsanleitung

Soleus Air

Soleus Air WS2-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air WCM1-08E-01 Bedienungsanleitung

Soleus Air

Soleus Air WS3-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air KFH-12/KFH-12-1 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-18HCE Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-10ESE Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-12 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-09-OD Technisches Datenblatt

Soleus Air

Soleus Air KY-28U Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-06SE-C Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung