Soleus Air TTWM1-14H-01 Bedienungsanleitung

1,000 BTU

Electronic Through the Wall Air Conditioner

Operating Instructions

Model

TTWM1--01

1,0 BTU

Οкпйнкл

3058080

Thank you for choosing a Soleus Air Air Conditioner. This owner’s manual will provide you with

valuable information necessary for the proper care and maintenance of your new product. Please take

a few moments to thoroughly read the instructions and familiarize yourself with all the operational as-

pects of your new air conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT SAFETY INSTRUCTIONS

Before installing and using your air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference. Your safety and the safety of others is very important to

us. Please pay attention to all safety messages outlined in this owner’s manual.

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow

the following basic precautions:

This is a safety alert symbol.

This symbol alerts you to potential hazards that can harm you or others or even cause

death.

All safety messages will directly follow the safety alert symbol and/or the words

“DANGER” or “WARNING”.

Failure to immediately follow these

instructions may cause serious injury

or even death.

All Safety messages alert you of potential hazards, how to reduce the chance of injury,

and what can happen if instructions are not followed correctly.

x Plug into a grounded 3 prong outlet.

x Do not remove the ground prong.

x Do not use a plug adapter.

x Do not use an extension cord.

x Unplug the air conditioner before servicing

x Use two or more people to move and install the air

conditioner

IMPORTANT SAFETY INSTRUCTIONS

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read

product labels for flammability and other warnings.

ACCIDENT PREVENTION

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions,

including the following:

x Be sure the electrical service is adequate for the model you have chosen. This information can be found on the

rating label located on the side of the cabinet or behind the grille.

x If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to

installation. If the windows is a triple-track type with a screen panel included, remove the screen completely before

installation.

x Be sure the air conditioner has been securely and correctly installed according to the installation instructions

provided with this manual. Save this manual and the installation instructions for future use when removing and

reinstalling the unit.

x When handling the air conditioner, be careful to avoid cuts form sharp metal fins on the front and rear coils.

ELECTRICAL INFORMATION

The complete electrical rating of your new air conditioner is

stated on the product rating label located on the unit. Refer to the

ratings on the label when checking electrical requirements.

x Be sure the air conditioner is properly grounded. To minimize

shock and fire hazards, proper grounding is important. The

power cord is equipped with a three-prong grounded plug for

protection against shock hazards.

x Your air conditioner must be used in a properly grounded

wall receptacle. If the wall receptacle you intend to use is not

adequately grounded or protected by a time delay fuse or

circuit breaker, a qualified electrician will have to install the

proper receptacle.

x Do not run the air conditioner with a protective cover on the

outside of the unit. This could result in mechanical damage

within the air conditioner.

x Do not use an extension cord or an adapter plug.

Read all instructions before using this air conditioner

NOTE: The power supply cord on this air conditioner contains a current detec-

tion device designed to reduce the risk of fire. Please refer to the  “

” for details. In the event that the power supply cord is damaged, it

cannot be repaired it must be replaced with a cord from Soleus .

Power supply cord with 3-prong grounding

plug and current detection device

WARNING: Avoid fire hazard or electronic shock,

DO NOT use an extension cord or an adapter plug.

DO NOT remove any prong from the power cord.

DO NOT

under any circumstances,

cut, remove, or bypass the

grounding prong!!



LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined

value. The cord will remain de-energized until the devise has been manually reset. This is intended to re-

duce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded

and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground

or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet7KH/('OLJKWZLOOWXUQRQ

2. Press TEST Button, circuit should trip, cutting power to the air conditioner:KHQWKLVRFFXUV

3. Press RESET button WRUHVWRUHSRZHUWRWKHPDFKLQH2QFHSRZHULVUHVWRUHGWKH/('OLJKW

ZLOOWXUQRQDJDLQ

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the

air conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as ĀONāand ĀOFFāswitches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.



WKH/('OLJKWZLOOWXUQRII

1RWH<RXUXQLWVSRZHUFRUGDQGSOXJPD\GLIIHUIURPWKHRQHVKRZQ

SPECIFICATIONS

x Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.

x Power consumption is measured when the fan runs at the highest speed setting.

x These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

Model TTWM1-14H-01

Power Supply (Ph/V/Hz) 1/208-230V/60Hz

Dehumidifying Capacity (Pints/Day) 91.4

Rated Cooling Capacity (BTU/h) 14,000

Rated Heating Capacity (BTU/h) 10,500

Cooling Power Input (Watts) 1505

Heating Power Input (Watts) 3106

Rated Current Cooling (Amperage) 7.1A

Rated Current Heating (Amperage) 14A

EER 9.3 (cooling)

Noise Level dB(A) (High/Low) 59/55

CFM (High/Med/Low) 270/253/159

Power Plug Type NEMA 6-P

Dimensions (W” x H” x D”) 24 x 14.5 x 20.5

Package Dimensions (W” x H” x D”) 28.375 x 17.125 x 26.75

Net/Gross Weight (Lbs) 78.3 / 89.7

Refrigerant R-410A

PART LIST

You may not need all parts in the list, discard the unused parts.

NORMAL OPERATING SOUNDS

Sound of Rushing Air

You may hear the sound of

rushing air being moved by

the fan

Gurgle/Hiss

“Gurgling or hissing” noise

may be heard due to refrig-

erant passing through

evaporator during normal

operation.

High Pitched Chatter

Today’s high efficient com-

pressors may have a high

pitched chatter during the

cooling cycle.

Vibration

Unit may vibrate or make

noise because of poor wall

or window construction or

incorrect installation.

Pinging or Swishing

Droplets of water hitting con-

denser during normal opera-

tion may cause “pinging or

swishing” sounds.

UNIT INTO SLEEVEINSTALLATION INSTRUCTIONS

Now, follow below steps to properly install the unit into the sleeve.

NOTE: Sleeve assembly instruction is not included in this manual.

1. Attach(4) 4 1/2” x 3 1/2” x 1 1/2” Centering Support Blocks two on each side wall. Place in center of

side wall with the tapered end facing the opening .

2. Gently slide unit into sleeve.

3. Slide the unit completely to the rear to ensure a good seal, making sure the ground wire does not be-

come tangled.

4. Seal & Frame the unit as described in next page.

*Actual Sleeve may differ from image shown above.

1. Match the Plastic Grille on back of the sleeve.

2. Secure the Screw, Screw Washer, and Plastic Nut on each side of the sleeve shown as below:

Plastic Grille Installation

Tapered

End

Centering Support Block

Screw Washer

Plastic Nut

Plastic Grille

Sleeve

Screw

Once a compatible Solues Air sleeve (sold separately) is assembled, install the Plastic Grille(included)

on the back of the sleeve.

NOTE: Plastic Grille could be substituted by Aluminum Grille, which is also included in the package.



FINISHING INSTALLATION

Once the sleeve (sold separately) is installed, slide the air conditioner into wall sleeve.

NOTE: Sleeve & Grille installation instruction is not included in this manual.

1. Install the 1” x 1 1/2” x 84” long Stuff-Seal between

the wall-sleeve and the unit. A flat-bladed screwdriver

or putty knife is recommended.

2. Assemble the Trim Frame by inserting the top and bottom pieces into side pieces and snapping into

place. Pull power cord through Trim Frame then slide over unit until flush with wall.

Stuff-Seal

Trim Frame

Power Cord

* !!" #$$""%'+



1) Power On and Off - Press the POWER to turn the unit ON and OFF.

2) Digital Display - Displays the set temperature in Auto, Cool, Heat, and Dry modes, and current room

temperature in Fan mode. It also displays the set time for the Delay Timer function.

3) Temperature Select - Select the desired temperature by pressing either ▲ or ▼ button when using

the unit in Auto, Cool, Heat, Energy Saver, and Sleep modes. The temperature indicator flashes to

display the desired temperature setting. After the temperature is set, the unit will display this tempera-

ture setting until it is changed by the user.

4) Delay Timer - Press DELAY TIMER button and select the desired ON/OFF time by pressing either

▲ or ▼ button.

5) Fan Speed Control - Press the SPEED button to cycle through the different fan speeds: High, Me-

dium, and Low.

6) Mode Selection - Press the MODE button repeatedly to cycle between the different modes: Cool,

Heat, Fan, Dry, and Auto.

-Cool Mode : When the unit is in Cool mode, the Cool light will turn on. Use TEMPERATURE SE-

LECT buttons to adjust the desired temperature between 61°F-90°F.

-Heat Mode : When in Heat mode, the Heat light will turn on. Use TEMPERATURE SELECT buttons

to adjust the desired temperature.

-Fan Mode : When in Fan mode, the Fan light will turn on. Fan mode operates the unit just like a fan

and circulates air throughout the room without any additional cooling.

OPERATING YOUR AIR CONDITIONER

Before you start using your air conditioner, please familiarize yourself with the control panel and

remote control functions. This air conditioner can be controlled by the control panel (touch pad)

CONTROL PANEL



-Dry Mode : When the unit is in Dry mode, the Dry mode light will turn on. Dry mode operates the

unit as an evaporative dehumidifier to remove excess moisture from the room. Use this feature when

there is excess humidity in the air.

-Auto Mode : Press Mode button repeatedly to cycle to Auto mode. The unit will automatically run

between Cool and Fan based on current room temperature.

7) Auto-on Delay Timer - To program the Auto-on timer, press the DELAY TIMER button when the

unit is powered off. Press the ▲ or ▼ buttons to set the desired time (1-24 hours) for the unit to

automatically turn on. Auto-off Delay Timer - To program the Auto-off Timer , press the DELAY

TIMER button when the unit is powered on. Press the ▲ or ▼ buttons to set the desired timer (1-24

hours) for the unit to automatically turn off.

8) Check Filter - After the unit is on for 250 hours, the CHECK FILTER light will turn on to remind you

to clean the filter. Press the FILTER RESET button once the filter has been cleaned to turn the light

off.

9) Sleep Mode - Press the SLEEP button to enter the Sleep mode, the fan will run on low to keep fan

noise at a minimum. The temperature setting will gradually increase 2°F above the original set tem-

perature for each of first 2 hours. The unit will keep operating the same temperature until the sleep

mode is turned off.

10) Energy Saver Mode - When in Cool mode, Press ENERGY SAVER button to activate Energy

Saver mode, the Energy Saver light will turn on. Energy Saver mode will cycle the fan off and on

with the compressor to limit energy consumption. Use this feature when the room is unoccupied and

a greater range of room temperature is acceptable.

11) Signal Receiver- Point the remote control to the air conditioner when sending instruction to the unit.

OPERATING YOUR AIR CONDITIONER

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air PE8-11R-32 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air PSX-08-01 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air PE2-08R-62 Bedienungsanleitung

Soleus Air

Soleus Air WS4-06EW-201 Bedienungsanleitung

Soleus Air

Soleus Air PE3-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air PH1-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air GM-CAC-08ESE Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-22 Technisches Datenblatt

Soleus Air

Soleus Air WM1-05M-01 Bedienungsanleitung

Soleus Air

Soleus Air Soleus LX-100 LX-100 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-10ESE Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air LX-140 NT Bedienungsanleitung

Soleus Air

Soleus Air GH-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air KFTHP-9-ID Bedienungsanleitung

Soleus Air

Soleus Air MAC-10K Bedienungsanleitung

Soleus Air

Soleus Air iCongo PSQ-08-01 Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung