Soundcore Space A40 Bedienungsanleitung
soundcore Space A40
USER MANUAL
EN 01
Download the soundcore app to enhance your experience (Ambient
Sound modes, adaptive noise control, HearID Sound, equalizer
tuning, custom controls, firmware update, and more).
If your earbuds cannot connect with the soundcore app, update it
to the latest version in your mobile app store.
Choose the Ear Tips that fit your ears best and take a fit test in the
soundcore app to ensure you get the best ANC performance.
XL
M
XS S L
1. Tear off the insulation sticker on the earbuds before first use.
2. Place the earbuds in the charging case and close it.
3. Connect the charging case to the power supply by using a certified
USB-C charging cable. Alternatively, position the charging case at the
center of your wireless charger for wireless charging.
• Fully charge both the earbuds and the charging case before the first
use. When they are fully charged, the LED indicators will turn off.
1 2 3
< 30%
30% - 70%
70% - 95%
96% - 99%
100%
10min=4hr
3hr
ON
1
soundcore
Space A40
soundcore
Space A40
ace
c
ace
c
ace
c
c
2
3
s
Pairing
Connected
5% - 30%
<5%
30% - 70%
>70%
2s
The earbuds can connect with two devices at the same time so you can
switch between them effortlessly. Wear the earbuds, then press and hold
the touchpad on both earbuds for 3 seconds simultaneously. Select
"soundcore Space A40" from your device's Bluetooth list to connect.
soundcore
Space A40
soundcore
Space A40
ace
c
ace
c
ace
c
c
12
L R
3s
3s
Open the charging case, the earbuds will automatically power on
and enter Bluetooth pairing mode.
Select "soundcore Space A40" from your device's Bluetooth list
when connecting for the first time.
WEARING
POWERING ON & PAIRING MULTIPOINT CONNECTION
APP
CHARGING
EN 02
To manually enter Bluetooth pairing mode, place the earbuds in
the charging case and leave the case open, then press and hold the
button on the charging case for 3 seconds until the LED indicators
flash white in sequence continuously.
1
2
3s
PAIRING
You can also customize controls in the soundcore app.
MONOTWSTWS
ANC Transparency
Normal
×2
R
×2
L
×2
L/R
L/R 2s2s
ANC Transparency
Normal
2s2s
L/R 2s2s
×2
×2
2s2s 2s2s
To reduce unwanted ambient noise, select a noise cancellation mode in
the soundcore app.
• Adaptive Mode: Automatically switch to the most suitable noise
cancelling equalizer for different user scenarios.
• Manual Mode: Set the level of noise cancellation manually.
To stay aware of your surroundings while listening to music, select a
transparency mode in the soundcore app.
• Fully Transparent: Hear all ambient sounds.
• Vocal Mode: Voices stand out more clearly from other ambient
sounds.
MANUAL PAIRING
NOISE CANCELLATION TRANSPARENCY
In the soundcore app, go to settings and select Dual Connections >
Connect New Device.
1
23
MULTIPOINT CONNECTION
TWS mode Mono mode
Play / Pause Tap twice (R) Tap twice
Next track Tap twice (L) /
Answer / End a call Tap twice (L/R) Tap twice
Reject a call Tap and hold for 2
seconds (L/R)
Tap and hold for 2
seconds
Switch ambient
sound modes
(ANC / Transparency
/ Normal)
Tap and hold for 2
seconds (L/R)
Tap and hold for 2
seconds
CONTROLS
EN 03
Reset if the earbuds have issues pairing with each other or with other
devices.
Delete the pairing history from your Bluetooth device first. Place the
earbuds in the charging case and leave the case open. Then press and
hold the button on the case for 10 seconds until the LED indicators on
the case flash white 3 times and then flash in sequence.
1
10s
2
×3
Steady white
Flashing white
Flashing white in sequence
Light off
5% - 30%
<5%
30% - 70%
>70%
Pairing
Connected 2s
LED LIGHT GUIDE FIRMWARE UPDATE
RESET
• Use devices powered by Android 8.0 or later to experience LDAC
quality sound.
• LDAC provides higher quality sound, increases power consumption,
and reduces playtime.
• Enable LDAC in a low-interference environment to ensure a stable
Bluetooth connection.
1. Go to settings in the soundcore app. 2. Click on "Sound Mode".
3. Select "Preferred audio quality" to switch to LDAC codec.
4. You will be notified that the earbuds do not support LDAC when
connected to two devices. Select "Turn on" to continue.
5. It takes about 10 seconds to switch audio codecs. You may be
requested to update the earbuds' firmware if available.
1
2
3
45
Return the earbuds to the charging case and close the case.
The earbuds will automatically power off after 30 minutes if they are not
connected. The duration can be set in the soundcore app.
2
1
POWERING OFF
You will be informed once the new version of firmware is detected when
you connect the earbuds with the app. Ensure the earbuds are placed in
the charging case and the case remains open until the firmware update
is completed. During the update, ensure the earbuds are being charged
and avoid any usage.
1
2
LDAC
EN 04
Specifications are subject to change without notice.
Input 5 V 0.65 A
Rated output power 2.2 mW
Battery capacity 53 mAh x 2 (earbuds);
800 mAh (charging case)
Charging time 2 hours
Playtime (with ANC off) Up to 10 hours (Total 50 hours
with the charging case)
Playtime (with ANC on) Up to 8 hours (Total 40 hours
with the charging case)
Driver unit 10 mm dynamic driver
Frequency response 20 Hz - 20 kHz
Impedance ѷ
Waterproof level (Earbuds) IPX4
Bluetooth version 5.2
Bluetooth range 10 m / 33 ft
SPECS
Andere Handbücher für Space A40
2
Inhaltsverzeichnis
Andere Soundcore Kopfhörer Handbücher
Soundcore
Soundcore Soundcore Life P2 Bedienungsanleitung
Soundcore
Soundcore Life Q30 Bedienungsanleitung
Soundcore
Soundcore Life Q20+ Bedienungsanleitung
Soundcore
Soundcore Sleep A10 Bedienungsanleitung
Soundcore
Soundcore Life P3i Bedienungsanleitung
Soundcore
Soundcore Liberty Neo Bedienungsanleitung
Soundcore
Soundcore Life Dot 2 NC Bedienungsanleitung
Soundcore
Soundcore Life U2 Bedienungsanleitung
Soundcore
Soundcore Life Q20 Bedienungsanleitung
Soundcore
Soundcore Life Q30 Bedienungsanleitung
Soundcore
Soundcore VR P10 Bedienungsanleitung
Soundcore
Soundcore Liberty 2 Pro Bedienungsanleitung
Soundcore
Soundcore Sport Air Bedienungsanleitung
Soundcore
Soundcore Vortex Bedienungsanleitung
Soundcore
Soundcore Life Q30 Bedienungsanleitung
Soundcore
Soundcore A20i Bedienungsanleitung
Soundcore
Soundcore Liberty Air Bedienungsanleitung
Soundcore
Soundcore Life Q20+ Bedienungsanleitung
Soundcore
Soundcore Liberty Air 2 Bedienungsanleitung
Soundcore
Soundcore Life Note C Bedienungsanleitung
