Sper scientific AquaShock 850046K Bedienungsanleitung

AquaShock® DO Kit

850046K

2 3

AquaShock® DO Kit 850046K

Printed in the USA

The contents of this manual may not be reproduced or transmitted

in any form or by any means electronic, mechanical, or other

means that do not yet exist or may be developed, including

photocopying, recording, or any information storage and retrieval

system without the express permission from Sper Scientic.

Sper Scientic

8281 E. Evans Rd., Suite #103, Scottsdale, AZ 85260

Tel: (480) 948-4448 Fax: (480) 967-8736

Web: www.sperscientic.com

INTRODUCTION .....................................4

FEATURES..........................................5

MATERIALS SUPPLIED................................5

OPTIONAL ACCESSORIES ............................5

LCD DISPLAY .......................................6

POWER SUPPLY .....................................7

KEYPAD ............................................8

SETUP MODE .......................................9

PROBE SETUP .....................................17

CALIBRATION ......................................18

MEASUREMENT PROCEDURES .......................23

SPECIFICATIONS ...................................27

WARRANTY .......................................28

TABLE OF CONTENTS

4 5

INTRODUCTION

The Sper Scientic AquaShock® DO Meter is the most waterproof,

rugged and reliable DO meter on the market. It is fully waterproof,

including probe connections. As with all AquaShock® meters, the

DO Meter is completely shockproof, oats, and features a double

injection molded case with an integral protective soft grip outer

layer, high end antishock, LED backlight display, and is \powered

by the latest environmentally friendly, long lasting, rechargeable

Lithium Ion battery. The meter is highly accurate and stable, very

intuitive and includes all of the functions required by most users.

Sper Scientic guarantees you will not nd any meters more

rugged and reliable than AquaShock®.

FEATURES

• Floats

• Shockproof

• IP67 Waterproof

• Protective soft grip outer layer

• Rechargeable Lithium Ion battery

• Multi-line display LCD screen

• Reads DO (Dissolved Oxygen)

• Auto Ranging

• Selectable Automatic or Manual Temperature Compensation

• Celsius or Fahrenheit selectable

• 99 data points per scale for analysis

• Calibration point review

• Internal clock and calendar

• Maximum, minimum and average

• Hold function

• Low battery indicator

• Backlight

MATERIALS SUPPLIED

• Meter

• Waterproof Probe Input Covers

• Dissolved Oxygen/ATC Temperature Probe

• Electrolyte

• 1 Lithium 7.4 V Battery (1450 mAh)

• DC Power Adapter

• Instruction Manual

• Hard Carrying Case

• 840093 Field Tripod

• 850046P Replacement AquaShock® DO Probe 10’ Cable

• 850046P25 Replacement AquaShock® DO Probe 25’ Cable

• 850046P50 Replacement AquaShock® DO Probe 50’ Cable

OPTIONAL ACCESSORIES

6 7

LCD DISPLAY

Name Description

1 Ready Displayed when measuring

results are stable

2 Scale Unit Current measurement scale unit

3 Measuring Results Current measurement value

4 ATC/MTC Automatic/Manual Temperature

Compensation indicator

5 Temperature Scale Current temperature measurement unit

6Temperature Value Current temperature

measurement value

7Battery Icon Current battery power level

1 2

Battery voltage is more than 7.7V shows full.

Battery Power Icon:

Battery voltage between 7.2V and 7.7V shows 2 cells.

Battery voltage between 6.6V and 7.2V shows 1 cell.

Battery voltage less than 6.6V shows 0 cells and ashes.

Display showing battery charging from

less than 6.6V to fully charged.

More than 90% life remaining

More than 85–90% life remaining

More than 80-85% life remaining

Less than 80% life remaining

Probe Life Icon:

LCD DISPLAY

POWER SUPPLY

This meter is powered by one rechargeable Lithium 7.4V (1450

mAh) battery. The DC power adapter can be used to charge the

battery even when the meter is turned o󰀨. This meter includes a

charge protection function and will automatically stop charging

when the battery is full. A complete re-charge takes approximately

8 hours.

8 9

DO Meter

KEYPAD

Name 1st Function 2nd Function

1Power/Backlight/

Low Battery

Power on/o󰀨 Backlight on/o󰀨

2 Setup Setting parameters Conrm setting

3MI↑ Store data ↑

4MR↓ Recall data ↓

5Max/Min/Ave Max/Min/Ave

6Range/Temp Switch measuring

scale

Set temperature value

7Hold/Exit Hold Exit

8CAL Calibration

SETUP MODE

The Setup Mode allows you to customize the following

meter preferences and defaults:

• Temperature Scale

• Clock Setting

• Restore Factory Defaults

• MTC (Manual Temperature Compensation)

Temperature Coe󰀩cient

• View Calibration Points

• View Probe Parameters

• Barometric Pressure Parameters

• RH Parameters

• Salinity Compensation

• Oxygen Content (mg/L (ppm)) Unit

• % O󰀨set Setting

Press POWER to turn the meter on before performing

any setup function.

Temperature Units

1. Press SETUP to enter the Setup Mode.

2. Press SETUP to enter the Set Temperature screen.

3. The unit °C or °F will ash on the LCD.

4. Press ↑or ↓ to select the °C or °F temperature unit.

5. Press SETUP to save and return to Normal Mode.

6. Press EXIT to return to Normal Mode without saving the selection.

Note…

When the temperature reading is outside the range, the display will

show “HHH” (high) or “LLL” (low).

Real Time Clock

1. Press SETUP to enter the Setup Mode.

2. Press ↑or ↓ to select the Set Clock screen (see Fig. A).

3. Press SETUP to set the year (see Fig. B). The value will ash

on the LCD.

4. Press ↑ to increase the value by 1.

Hold down ↑ to continually increase the value.

Press ↓ to decrease the value by 1.

Hold down ↓ to continually decrease the value.

Press SETUP to save and the meter automatically

moves to the month setting (see Fig. C.).

5. Repeat step 4 to adjust the month, day, hour, and minute

(see Fig. D, E & F).

6. Press EXIT to return to Normal Mode without saving.

Note...

This procedure adjusts the meter’s internal clock which is a 24

hour format only. The internal clock will function when the meter is

turned o󰀨 if the battery is installed.

Fig. A

Fig. D

Fig. B

Fig. E

Fig. C

Fig. F

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850048 Bedienungsanleitung

Sper scientific

Sper scientific 850003 Bedienungsanleitung

Sper scientific

Sper scientific 850051 Bedienungsanleitung

Sper scientific

Sper scientific 860055 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 840015 Bedienungsanleitung

Sper scientific

Sper scientific 800047 Bedienungsanleitung

Sper scientific

Sper scientific DS-2013SD Bedienungsanleitung

Sper scientific

Sper scientific 850014 Bedienungsanleitung

Sper scientific

Sper scientific 300068 Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific 850081 Bedienungsanleitung

Sper scientific

Sper scientific 860040 Leitfaden

Sper scientific

Sper scientific 840007 Bedienungsanleitung

Sper scientific

Sper scientific 300056 Bedienungsanleitung

Sper scientific

Sper scientific 800052 Bedienungsanleitung

Sper scientific

Sper scientific 860045 Bedienungsanleitung

Sper scientific

Sper scientific 840065 Bedienungsanleitung

Sper scientific

Sper scientific 800050 Bedienungsanleitung

Sper scientific

Sper scientific 840065 Bedienungsanleitung

Sper scientific

Sper scientific 840064 Bedienungsanleitung

Sper scientific

Sper scientific 840005 Bedienungsanleitung

Sper scientific

Sper scientific 900030 Bedienungsanleitung

Sper scientific

Sper scientific 800048 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung