Sper scientific 800050 Bedienungsanleitung

Datalogging IAQ Meter

800050

Instruction Manual

Datalogging IAQ Meter 800050

Sper Scientic

Printed in the USA

The contents of this manual may not be reproduced

or transmitted in any form or by any means electronic,

mechanical, or other means that do not yet exist or may

be developed, including photocopying, recording, or

any information storage and retrieval system without the

express permission from Sper Scientic.

TABLE OF CONTENTS

1. INTRODUCTION . . . . . . . . . . . . . . . . . 5

2. FEATURES . . . . . . . . . . . . . . . . . . . . 6

3. MATERIALS SUPPLIED . . . . . . . . . . . . . 6

4. METER COMPONENTS . . . . . . . . . . . . . 7

5. ABC & MANUAL CALIBRATION. . . . . . . . . 8

6. MEASUREMENT PROCEDURES. . . . . . . . 9

7. SOFTWARE INSTALLATION . . . . . . . . . .13

8. RUNNING THE SOFTWARE . . . . . . . . . .15

9. DATALOGGER SETTINGS . . . . . . . . . . .16

Setting Options . . . . . . . . . . . . . . . . . . 16

Comm Port Setting . . . . . . . . . . . . . . . . 16

Basic Logger Setting . . . . . . . . . . . . . . . 17

Logger Alarm & Sensor Setting . . . . . . . . . . 18

Logger Sampling Setting . . . . . . . . . . . . . 18

Setting Start Modes . . . . . . . . . . . . . . . . 19

10. DATA SAMPLING AND RECORDING . . . . . 21

11. DOWNLOADING DATA . . . . . . . . . . . . . 23

12. TROUBLESHOOTING . . . . . . . . . . . . .26

13. SPECIFICATIONS . . . . . . . . . . . . . . .27

14. WARRANTY . . . . . . . . . . . . . . . . . . . 28

INTRODUCTION

This Sper Scientic Datalogging IAQ Meter 800050 is ideal

for measuring indoor air quality in crowded public spaces

with potentially high levels of CO2 (carbon dioxide) such

as o󰀩ces, factories, classrooms, hospitals and hotels.

Recalls the maximum and minimum CO2 readings and

has a user selectable audible maximum alarm. Automatic

Baseline Calibration (ABC) and maintenance free NDIR

(non-dispersive infrared) CO2 sensor ensure long-term

accuracy, stability and reliability. Calibrates to air and

has a hold function. Records up to 32,000 data points of

temperature, RH and CO2 that can be downloaded using a

USB cable and software (included).

FEATURES

• Measures Air Temperature, RH, CO2, Dew Point

and Wet Bulb

• Recalls the min/max CO2 readings.

• User selectable audible maximum alarm.

• Calibrates to air

• Hold function

• Records up to 32,000 data points of temperature,

RH, and CO2

• Tripod mounting screw

MATERIALS SUPPLIED

• Datalogging IAQ meter

• CD (USB Driver and Logger Software)

• USB Connector Cable

• AC Adapter

• Carrying Case

• Instruction Manual

METER COMPONENTS

1. Sensor

2. LCD Display

3. Hold Button

4. Mode Button

5. Power Button

6. Max/Min Button

7. Set Button

8. Unit Button

9. Adjust Button/Key Start

10. Battery Compartment

(on back, not pictured)

11. USB Driver/Datalogging

Software CD

11.

ABC CALIBRATION

Connect the AC Power supply to the meter. The meter

defaults to automatic baseline calibration (ABC) when the

unit is turned on. ABC ensures accuracy by eliminating

the zero drift of the infrared sensor. This will automatically

calibrate the meter at the minimum CO2 reading detected

during 15 days of continuous metering.

The ABC is designed for test areas that receive fresh air

with a CO2 level of 400 ppm at some point during fteen

days of metering. If the meter is being used in a closed

area with consistently high levels of CO2, the meter should

be calibrated manually.

MANUAL CO2 CALIBRATION

Note…

Manual calibration is not recommended unless the unit

can be kept in a 400 ppm CO2 environment for at least

12 hours.

1. Set the meter in an area with stable ambient conditions

and no people, or other sources of CO2.

2. Press and hold SET and UNIT for approximately 3

seconds. “CAL” will appear on the LCD.

3. The meter will display a countdown from 60, as it needs

60 seconds to calibrate, as well as “400” in the middle of

the screen.

4. Once completed, the meter will reset and the current

readings will now display.

MEASUREMENT PROCEDURES

For the most accurate measurement, do not place the

meter close to any source of CO2.

Note…

Measurement response time is 10 seconds for CO2 and

2 seconds for RH. If the operating environment changes,

it takes approximately 30 seconds for the CO2 sensor to

respond and 30 minutes for the RH sensor to stabilize.

1. Turn the meter ON by pressing PWR.

2. The meter will warm up briey and the reading will

be displayed. Due to the CO2 NDIR sensor, it takes

approximately 10 minutes to get stable readings.

3. To change the temperature scale, press UNIT to cycle

the display between °C and °F.

Note…

When CO2 exceeds 1000 ppm, both the alarm (bell) icon

and the red LED will ash a warning. When the CO2 level

falls below this threshold, these visual alarms will stop.

Minimum and Maximum Readings

The meter automatically records minimum and maximum

CO2 levels. To view the minimum and maximum readings

while in Normal Mode:

1. Press MAX/MIN to display the maximum reading.

2. Press MAX/MIN again to display the minimum reading.

3. Press MAX/MIN to return to Normal Mode.

To reset the minimum and maximum readings:

1. With the minimum or maximum reading displayed, press

HOLD for 2 seconds, “0” will display.

2. Press MAX/MIN to return to Normal Mode.

Hold Function

1. Press HOLD to freeze the current reading.

2. Press HOLD again to return to normal mode.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850019 Bedienungsanleitung

Sper scientific

Sper scientific 900019 Bedienungsanleitung

Sper scientific

Sper scientific 800098 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 850097 Bedienungsanleitung

Sper scientific

Sper scientific 850020 Bedienungsanleitung

Sper scientific

Sper scientific 850001 Bedienungsanleitung

Sper scientific

Sper scientific 840010 Bedienungsanleitung

Sper scientific

Sper scientific 801038 Bedienungsanleitung

Sper scientific

Sper scientific 840060 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 800100 Bedienungsanleitung

Sper scientific

Sper scientific 800012 Bedienungsanleitung

Sper scientific

Sper scientific 850045 Bedienungsanleitung

Sper scientific

Sper scientific 840065 Bedienungsanleitung

Sper scientific

Sper scientific WBGT Bedienungsanleitung

Sper scientific

Sper scientific 850081DOK Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific 850004 Bedienungsanleitung

Sper scientific

Sper scientific 840029 Bedienungsanleitung

Sper scientific

Sper scientific 850068 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung