Spirit CT 800 Bedienungsanleitung

Z100 / Z300 Z500 Z700

T r e a d m i l l

OW N E R ’ S M AN UAL

Please carefully read this entire manual before operating your

new treadmill

SPT0061

-1-

Important Safety Instructions……………………………………………………………………… 3

Important Electrical Information…………………………………………………………………… 4

Important Operation Instructions………………………………………………………………….. 5

Assembly instructions………………………………………………………………………………. 6

Operation of Your New Treadmill…………………………………………………………………..11

Programmable Features…………………………………………………………………………….14

Fitness Test…………….…………………………………………………………………………… 15

Target Heart Rate…………………………………………………………………………………... 19

Using a Heart Rate Transmitter…………………………………………………………………… 20

Heart Rate Control Operation……………………………………………………………………... 21

General Maintenance.……………….…………………………………………………………….. 22

Service Checklist - Diagnosis Guide……………………………………………………………... 24

Exploded View Diagram and Parts List………………………………………………..…………..26

Warranty…………………………….………………………………………………..………………30

Table of Contents

-2-

Congratulations on your new treadmill and welcome to the Spirit family!

Thank you for your purchase of this quality treadmill trainer. Your new treadmill was

manufactured by one of the leading fitness manufacturers in the world and is backed by

one of the most comprehensive warranties available.

Please take a moment at this time to record the name of the dealer and the date of

purchase below to make any future, needed contact easy. We appreciate your support

and we will always remember that you are the reason that we are in business.

Yours in Health,

BOYLES FITNESS Equipment Pty Ltd.

Name of Dealer______________________________________

Purchase Date_______________________________________

CT800 / SPT0061_ver. A

-3-

WARNING - Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock disconnect your SPIRIT treadmill from the

electrical outlet prior to cleaning and/or service work.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install

the treadmill on a flat level surface with access to a 230-volt AC, 10-amp grounded outlet.

DO NOT USE AN EXTENSION CORD UNLESS IT IS 16AWG OR LARGER, WITH ONLY ONE

OUTLET ON THE END. The treadmill should be the only appliance in the electrical circuit.

DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER

ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may

result along with computer malfunctions.

■Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

treadmill may result.

■Do not block the rear of the treadmill. Provide a minimum of 1 meter clearance between the

rear of the treadmill and any fixed object.

■Keep children away from the treadmill. There are obvious pinch points and other caution

areas that can cause harm.

■Keep hands away from all moving parts.

■Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

■Keepthemainscordawayfromheatedsurfaces.

■Donotoperatewhereaerosolsprayproductsarebeing used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

■Neverdroporinsertanyobjectintoanyopenings.

■Donotuseoutdoors.

■Todisconnect,turnallcontrolstotheoffposition, remove tether cord, then remove the

plug from the outlet.

■Donotattempttouseyourtreadmillforanypurpose other than for the purpose it is intended.

■Thepulsesensorsarenotmedicaldevices.Various factors, including the user’s movement,

may affect the accuracy of heart rate readings. The pulse sensors are intended only as

exercise aids in determining heart rate trends in general.

■Usehandrailsprovided;theyareforyoursafety.

■Wearpropershoes.Highheels,dressshoes,sandals or bare feet are not suitable for use on

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation. SAVE

THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

-4-

WARNING!

NEVER use a RCD - Residual Current Device (U.S. ver.= GFCI) - wall outlet with this treadmill.

As with any appliance with a large motor, the RCD/GFCI will trip often. Route the power mains

cord away from any moving part of the treadmill including the elevation mechanism and

transport wheels.

NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%)

or more, the performance of your treadmill may be affected. Such conditions are not covered

under your warranty. If you suspect the voltage is low, contact your local power company or a

licensed electrician for proper testing.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,

near a pool or spa, or in any other high humidity environment. The temperature specification is 40

degrees c, and humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can

occur when a treadmill is first turned on or even during normal use. If your treadmill is tripping the

circuit breaker (even though it is the proper current rating and the treadmill is the only appliance on

the circuit) but the circuit breaker on the treadmill itself does not trip, you will need to replace the

breaker with a high inrush type. This is not a warranty defect. This is a condition we as a

manufacturer have no ability to control. This part is available through most electrical supply stores.

This product must be grounded. If the treadmill’s electrical system should malfunction or

breakdown grounding provides a path of least resistance for electric current, reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug

must be plugged into an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the

product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

Important Electrical Information

Grounding Instructions

-5-

●

NEVER operate this treadmill without reading and completely understanding the results of any

operational change you request from the computer.

●

Understand that changes in speed and incline do not occur immediately. Set your desired

speed on the computer console and release the adjustment key. The computer will obey the

command gradually.

●

NEVER use your treadmill during an electrical storm. Surges may occur in your household

power supply that could damage treadmill components.

●

Use caution while participating in other activities while walking on your treadmill; such as

watching television, reading, etc. These distractions may cause you to lose balance or stray

from walking in the center of the belt; which may result in serious injury.

●

NEVER mount or dismount the treadmill while the belt is moving. SPIRIT treadmills start at a very

low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt

during slow acceleration is proper after you have learned to operate the unit. Always hold on to a

handrail or hand bar while making control changes (incline, speed, etc.).

●

Do not use excessive pressure on console control keys. They are precision set to function

properly with little finger pressure. Pushing harder is not going to make the unit go faster or

slower. If you feel the buttons are not functioning properly with normal pressure or contact

your SPIRIT dealer.

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used

at all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the console control head. Your treadmill will not start and

operate without this.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The

magnet has strong enough power to minimize accidental, unexpected stopping. The clip should

be attached securely to make certain it does not come off. Be familiar with its function and

limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the

magnet is pulled off the console. Use the red Stop / Pause switch in normal operation.

Safety Tether Cord

Important Operation Instructions

-6-

Assembly Pack Check List

Step2

Step3

Step1

#110 - M5 x 10mm

Phillips Head Screw

(2 pcs)

#73 - M5 x 12mm

Phillips Head Screw

(1 pcs)

#112-M5x30mm

Phillips Head Screw

(2 pcs)

#125 - M5

Star Washer (1 pc)

#58 - 3/8"

Split Washer (6 pcs)

#104 – 3/8” x 3-3/4”

Button Head Socket Bolt (6 pcs)

#73 – M5 x 12mm

Phillips Head Screw (4 pcs)

#59 - 3/8"

Flat Washer (6 pcs)

#58-3/8"

Split Washer (6 pcs)

#59-3/8"

Flat Washer (6 pcs)

#105–3/8”x3/4”

Button Head Socket Bolt (6 pcs)

#108–M8x12mm

Socket Cap Bolt (6 pcs)

-7-

Step 1: Upright Tubes

•Therightsideuprighttube(19)hasthecomputercable (A)(87) pre-installed. Lift the tube off

the walking surface and attach it to the base frame. You need to gently pull on the computer

cable as you line up the upright tube, taking the slack out, so the cable does not get pinched

between the tube and the base frame. Assemble one 3/8” x 3-3/4” bolt (104), 3/8” split

washer (58) and 3/8” flat washer (59) through the top hole in the retaining plate (21), and

corresponding top hole in the upright tube, and screw into the base frame. Now install the

other two bolts (104) and washers (58 & 59) and tighten all three securely.

•Installtheleftupright(18)inthesamemanner.

•Installthelowersidecaps(32&33)withfourM5x 12mm screws (73).

Assembly Instructions

-8-

Step 2: Console Assembly

•Connecttogetherthematingcomputercables(G(86)& C(120)), hand pulse cables (D(122)

& F(88), right and B(28) & E(88), Left) and attach the ground cable (H)(121) to the hole (I) in

the steel frame with a M5 x 12 mm screw (73) and a M5 star washer (125) .

•Mounttheconsole(36)tothehandlebarframe(5)with two M5 x 30mm screws (112) and

two M5 x 10mm screws (110).

-9-

IMPORTANT ASSEMBLY INSTRUCTION

When assembling the console mounting interface brackets (Items 3&4) please be

sure to slide the brackets all the way towards the back of the console before

tightening the bolts.

Andere Handbücher für CT 800

Andere Spirit Tretmühle Handbücher

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit CT850 ENT Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit 1611800-1 Bedienungsanleitung

Spirit

Spirit XT285 Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit Z100-A81 Bedienungsanleitung

Spirit

Spirit 16807008500 Bedienungsanleitung

Spirit

Spirit XT175 Bedienungsanleitung

Spirit

Spirit XT 9 Bedienungsanleitung

Spirit

Spirit F7500 Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit XT185 Bedienungsanleitung

Spirit

Spirit 16117701 Bedienungsanleitung

Spirit

Spirit 1613685US XT685 Bedienungsanleitung

Spirit

Spirit XT385 Bedienungsanleitung

Spirit

Spirit XT485 Bedienungsanleitung

Spirit

Spirit XT685 Bedienungsanleitung

Spirit

Spirit XT685ENT Bedienungsanleitung

Spirit

Spirit CT850 Bedienungsanleitung

Spirit

Spirit MT200 Bedienungsanleitung

Spirit

Spirit XT685 Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Spirit

Spirit XT285 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung