Spirit XT375 Bedienungsanleitung
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TR
EADMILL
OWNER’S MANUAL
XT375 / XT475 / XT675
1
Product Registration…………………………………………………………………………. 2
Important Safety Instructions………………………………………………………………… 3
Important Electrical Information………………………………………………………………4
Important Operation Instructions……………………………………………………………..5
ssembly instructions………………………………………………………………………….6
Folding & Transport Instructions…………..………………………………………………….17
Operation of Your New Treadmill……………………………………………………………. 18
Programmable Features……………………………………………………………………….21
Target Heart Rate……………………………………………………………………………… 23
Using a Heart Rate Transmitter………………………………………………………………. 25
Heart Rate Control Operation………………………………………………………………… 26
General Maintenance.……………….………………………………………………………….27
Service Checklist - Diagnosis Guide…………………………………………………………. 30
Manufacturer’s Limited Warranty………………………………………………………………32
Table of Contents
XT375 / XT475 / XT675
2
Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc.
Your new treadmill was manufactured by one of the leading fitness manufacturers in
the world and is backed by one of the most comprehensive warranties available.
Through your dealer, Spirit will do all we can to make your ownership experience as
pleasant as possible for many years to come. The local dealership where you
purchased this treadmill is your administrator for all Spirit warranty and service needs.
Their responsibility is to provide you with the technical knowledge and service
personnel to make your experience more informed and any difficulties easier to
remedy.
Please take a moment at this time to record the name of the dealer, their telephone
number, and the date of purchase below to make any future, needed contact easy.
We appreciate your support and we will always remember that you are the reason that
we are in business. Please complete and mail your registration card today and enjoy
your new treadmill.
Yours in Health,
Spirit Manufacturing, Inc.
Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase Date_______________________________________
RECORD YOUR SERIAL NU BER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number_______________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing, Inc. or visit: www.spiritfitness.com/warranty.htm to register online.
XT375 / XT475 / XT675 Ver. C
CONGRATULATIONS ON YOUR
NEW TREADMILL AND WELCOME
TO THE SPIRIT FAMILY
Product Registration
XT375 / XT475 / XT675
3
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from
the electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons,
install the treadmill on a flat level surface with access to a 120-volt, 20-amp grounded
outlet.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY
ONE OUTLET ON THE END AND DOES NOT EXCEED 10 FEET IN LENGTH. DO NOT
ATTE PT TO DISABLE THE GROUNDED PLUG BY USING I PROPER ADAPTERS, OR
IN ANY WAY ODIFY THE CORD SET. The treadmill should be the only appliance in
the circuit in which it is connected. A serious shock or fire hazard may result along
with computer malfunctions. See Grounding Instructions, page 3.
■ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
■ Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
■ Keep children away from the treadmill. There are obvious pinch points and other
caution areas that can cause harm.
■ Keep hands away from all moving parts.
■ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working
properly, call your dealer.
■ Keep the cord away from heated surfaces.
■ Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous environment.
■ Never drop or insert any object into any openings.
■ Do not use outdoors.
■ To disconnect, turn all controls to the off position, remove tether cord, then remove the
plug from the outlet.
■ Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
■ The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
■ Use handrails provided; they are for your safety.
■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Important Safety Instructions
XT375 / XT475 / XT675
4
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
WARNING
●
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large
switching currents of the drive motor will trip GFCI type outlets, as will any appliance with a
large motor. Route the power cord away from any moving part of the treadmill including the
elevation mechanism and transport wheels.
●
NEVER remove any cover without first disconnecting C power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may
be affected. Such conditions are not covered under your warranty. If you suspect
the voltage is low, contact your local power company or a licensed electrician for proper
testing. See Diagnosis Guide, page 27.
●
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The temperature
specification is 40 to 120 degrees Fahrenheit, and humidity limit is 95%, non-condensing (no
water drops forming on surfaces).
This product must be grounded. If the treadmill should malfunction or breakdown,
grounding provides a path of least resistance for electric current, reducing the risk of electric
shock. This product is equipped with a cord having an equipment-grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product if it will not fit the outlet. Have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like
the plug illustrated below. temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet, (below) can be installed by a qualified electrician. The green colored rigid
ear-lug, or the like, extending from the adapter, must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held
in place by a metal screw.
Important Electrical Information
Grounding Instructions
Grounded Outlet
Grounding Pin Grounded Outlet Box
Metal Screw
dapter
Tab of
Grounding
Screw
XT375 / XT475 / XT675
5
●
NEVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
●
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey
the command gradually.
●
NEVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components.
●
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or
stray from walking in the center of the belt; which may result in serious injury.
●
NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start with
at a very low speed and it is unnecessary to straddle the belt during start up. Simply
standing on the belt during slow acceleration is proper after you have learned to operate
the unit.
●
lways hold on to a handrail or hand bar while making control changes (incline, speed,
etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure contact your
Spirit dealer.
safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.
To Use:
1. Place the magnet into position on the round metal portion of the console control head.
Your treadmill will not start and operate without this. Removing the magnet also secures the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stopping. The clip
should be attached securely to make certain it does not come off. Be familiar with its function
and limitations. The treadmill will stop, depending on speed, with a one to two step coast
anytime the magnet is pulled off the console. Use the red Stop / Pause switch in normal
operation.
Safety Tether Cord
XT375 / XT475 / XT675
6
Assembly Instructions (XT375 / XT475)
XT375 / XT475 / XT675
7
Assembly Pack Check List (XT375 / XT475)
Step 1
Step 3
5/16” x 2-3/4”
Button Head Socket Bolt (2pcs)
8mm Beveled
Washer (2pcs)
8 x 23 x 1.5T
Flat Washer (4pcs)
5/16” x 1-1/2”
Button Head Socket Bolt (2pcs)
Step 2
5/16” x 2” Button Head
Socket Bolt (4pcs)
8 x 23 x 1.5T
Curved Washer (4pcs)
5 x 16 m/m
Tapping Screw (6 pcs)
5/16” x 15m/m Button Head
Socket Bolt (8 pcs)
M5 Speed Nut (6 pcs)
XT375 / XT475 / XT675
8
Tools
Step 4
3.5 x 40m/m
Self Tapping Screw (6 pcs)
Safety Key (1pc) Deck / Belt
Lubricant (1pc)
M6 llen Wrench (1pc)
Combination M5 llen Wrench
& Phillips Head Screw Driver (1 pc)
XT375 / XT475 / XT675
9
!!ATTENTION: I PORTANT UNPACKING INSTRUCTIONS. PLEASE
READ BEFORE UNPACKING YOUR FOLDING TREAD ILL!!
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when
the strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on it’s side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to grab
it, but do not tilt the treadmill up to gain access to the strap end.
Assembly (XT375 /XT475)
Unpack the treadmill and locate the hardware pack. The hardware pack is separated into: one
section containing tools and four sections labeled steps 1-4 which contain the hardware needed
for assembly of each step. The assembly steps below are numbered one through four and
correspond to the hardware in the numbered sections of the hardware pack. Remove only the
hardware for the step you are currently assembling to avoid confusion and mix-ups.
STEP 1
1. Take the Left and Right upright tubes and slip the upright covers onto the tubes (observe
the cover orientation is correct). Connect the Middle Console Cable that exits from the
bottom of the right upright tube with the lower Console Cable. Install the Left and Right (L
& R) Uprights into the Left and Right Receiving Tubes. Be careful not to pinch the wire
when installing the upright.
2. Then install and hand tighten the eight 5/16”x 5/8” Button Head Socket Bolts in the
remaining holes on the sides and front of the L & R tubes.
3. Install the six M5 Speed Nut on the Frame Base left and right side.
4. Install the Left & Right Frame Base Caps into the Frame Base with the six 5x16m/m
Tapping Screws by using the Combination M5 llen Wrench & Phillips Head Screw Driver.
Do not tighten these bolts until assembly is complete. This makes aligning the
holes for mounting the console easier.
Andere Handbücher für XT375
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Spirit Tretmühle Handbücher
Spirit
Spirit Z88 Bedienungsanleitung
Spirit
Spirit XT 600 Bedienungsanleitung
Spirit
Spirit 16007602850 Bedienungsanleitung
Spirit
Spirit Z9 Bedienungsanleitung
Spirit
Spirit XT 600 Bedienungsanleitung
Spirit
Spirit XT685ENT Bedienungsanleitung
Spirit
Spirit XT685 Bedienungsanleitung
Spirit
Spirit XT375 Bedienungsanleitung
Spirit
Spirit XT285 Bedienungsanleitung
Spirit
Spirit Z100 Bedienungsanleitung
Spirit
Spirit SPT0063 Bedienungsanleitung
Spirit
Spirit F7600 Bedienungsanleitung
Spirit
Spirit 1622778 Bedienungsanleitung
Spirit
Spirit 16117701 Bedienungsanleitung
Spirit
Spirit XT8 Bedienungsanleitung
Spirit
Spirit XT385 Bedienungsanleitung
Spirit
Spirit CT900ENT Bedienungsanleitung
Spirit
Spirit CT 800 Bedienungsanleitung
Spirit
Spirit Esprit CT90 Bedienungsanleitung
Spirit
Spirit CT 900 LED Bedienungsanleitung
Beliebte Tretmühle Handbücher anderer Marken
Smooth Fitness
Smooth Fitness EVO 3i Bedienungsanleitung
NordicTrack
NordicTrack NETL81810.0 Bedienungsanleitung
Schwinn
Schwinn 830/Journey 8.0 Bedienungsanleitung
Keys Fitness
Keys Fitness HealthTrainer HT-740T Bedienungsanleitung
NordicTrack
NordicTrack T 14.0 Treadmill Bedienungsanleitung
Master
Master F22 Bedienungsanleitung