Stac Zero Halcyon Bedienungsanleitung
1
s
Version 3.0
STAC Zero Halcyon
User Manual
2
Welcome!
Congratulations on purchasing
your STAC Zero Halcyon Smart
Trainer! Please take the time to
read through and understand
the recommended set-up,
operation and safety best
practices to make sure you get
the most out of your Halcyon.
Happy riding,
-The STAC Performance team
Support Videos: Support videos, along with many helpful support
articles and a full color copy of the manual are available through our
website support portal at https://www.staczero.com/support
___________________________________________________________
Table of contents
OVERVIEW.......................................................................................................4
TRAINER SAFETY..............................................................................................5
TRAINER COMPONENT DIAGRAM ...................................................................6
MOTOR ASSEMBLY STEPS................................................................................7
FIRST TIME SET-UP & CALIBRATION.................................................................8
PRIOR TO SET-UP .....................................................................................8
A. INSTALL BIKE ON TRAINER ...................................................................8
B. INSTALL A SPOKE MAGNET.................................................................10
C. ACTIVATE AND CALIBRATE TRAINER ..................................................11
3
WHEEL WEIGHTS ...........................................................................................12
WHEEL WEIGHT INSTALLATION..............................................................12
OPTIONAL WHEEL WEIGHT ADDITION INSTALLATION.............................17
USING TRAINING APPS ..................................................................................20
COMPATIBLE APPS.................................................................................20
SIMULATION MODE...............................................................................20
ERG MODE ............................................................................................20
CONNECT VIA BLUETOOTH SMART (BLE) ................................................20
CONNECT VIA ANT+ FE-C........................................................................20
STAC CONTROL PANEL APP OVERVIEW .........................................................21
WHERE TO DOWNLOAD.........................................................................21
GETTING STARTED .................................................................................21
MENU OPTIONS.....................................................................................23
HALCYON TRAINING MODES .........................................................................25
I. SIMULATION MODE...........................................................................25
USE STAC CONTROL PANEL WITH STRAVA..............................................25
USE STAC CONTROL PANEL WITHOUT STRAVA .......................................26
ADJUST INERTIA/ ROAD FEEL .................................................................26
II. ERG MODE ........................................................................................27
USE STAC CONTROL PANELS’ ERG MODE................................................27
ADJUST ERG MODE TRANSITION SPEED..................................................28
UPLOADING WORKOUTS........................................................................28
III. RESISTANCE MODE............................................................................29
CADENCE DETECTION ....................................................................................30
STORING AND CHARGING YOUR TRAINER.....................................................31
UNDERSTANDING THE LIGHTS.......................................................................32
TROUBLESHOOTING ......................................................................................33
Table of Contents...................................................................................33
APPENDIX A: WHEEL MAGNET ALIGNMENT ...........................................41
APPENDIX B: MANUAL POSITIONING......................................................46
4
Overview
You will need:
1. Your bike, mounted on your STAC Zero Halcyon Smart Trainer.
(See First Time Set-up and Calibration, pages 8-10).
2. A training app, which tells your trainer how much resistance to
create, running on a device such as a smart phone, tablet,
laptop or personal computer.
In order to control the Halcyon, you’ll download your preferred training
app to your device, start up the app and the trainer, and then connect
to the trainer in the app via one of two wireless protocols: Bluetooth
Smart [BLE] or ANT+.
(See Page 20 for a list of training apps and connection instructions, and
page 21 to download STAC’s free app, STAC Control Panel).
Types of Smart workouts:
There are two main types of Smart workouts.
ERG MODE
Erg mode keeps you accountable; making sure you hit every power target
in your workout by increasing resistance if you slow down too soon, or
easing up if you pedal faster. Erg mode apps often come with pre-planned
interval workouts, and show your training data onscreen.
SIM MODE
Simulation Mode simulates an outdoor ride, tougher on the climbs than the
downhills. Sim mode apps often come with fun graphics and allow you to
race with other app users.
New to Smart Trainers? Start here!
The Halcyon Smart Trainer can add fun, variety, challenge and
accountability to your workouts. Here’s a summary of everything
you need to know to get started Smart Training.
5
The Halcyon also has a non-smart mode, Resistance Mode, where you use
your bike’s gears to adjust resistance. Set the magnet distance in STAC
Control Panel to use Resistance mode [page 29].
Uploaded workouts: Sometimes you just want to get on and ride. See page
28 to learn how to upload a favorite Erg workout to your trainer so it starts
automatically.
TRAINER SAFETY
oBefore using your STAC Zero Halcyon consult a doctor if you or any
member of your household have a medical device that can be
affected by strong magnetic fields, such as pacemakers or ICD’s.
oStore the trainer out of reach of children and pets.
oWhen moving the trainer, carry it by the Threaded Rods or the Knobs
to avoid closing your hands between the Legs and the Frame.
oDo not put fingers or other appendages between the Magnet Arrays.
oBe very careful when using metal tools near the Magnets.
oNever place a computer or other sensitive electronics near the
Magnets.
oBefore each use, inspect the face of the Magnet Array for any metal
debris. Wipe any debris off with a rag.
oAvoid adjusting the Calipers by hand, as this contributes to wear and
tear on the motors. To manually position the Calipers, use the STAC
Control Panel App [see page 46].
oAlways retract the Spring Pin completely before rotating the Magnet
Arrays. Never use force on the Magnet Arrays or Spring Pins.
Rotating the Magnet Arrays forcefully will damage the Spring Pins.
oBe careful not damage or pull out ribbon cables and wires.
6
TRAINER COMPONENT DIAGRAM
Frame:
1. U-Frame
2. Body Feet
3. Legs
4. Knobs
5. Threaded Rods
6. Wing Nuts
7. Skewer Cups
Resistance Unit:
8. Strain Gauge
9. Calipers
10. Spring Pins
11. Magnet Array
12. Anti-wear Stickers
13. Speed Sensor
14. Electronics Housing
15. Actuator
Accessories:
16. Wheel Weight
17. Wheel Weight Addition
(optional accessory)
18. Spoke Magnet
Not pictured above:
19. Quick Release Skewer
20. Micro USB cable
21. 4mm and 3mm Allen
Keys
7
MOTOR ASSEMBLY STEPS
1. Gently move
motor post to
align with hole on
the caliper arm.
2. Using the
supplied 8mm
wrench, begin
screwing
motor post
into caliper
arm.
3. Tighten the
motor post
until the hex
section is right
against the
body of the
caliper.
Repeat with
2nd motor.
8
FIRST TIME SET-UP & CALIBRATION
Support Video: “Installing your bike on the STAC Zero Halcyon Smart
Trainer”
PRIOR TO SET-UP
1. Complete the final assembly step before beginning the first time set
up. Motors arrive detached to prevent damage to them during shipping.
2. The STAC Zero Halcyon’s battery may be low when it arrives. Charge
your trainer for 30 minutes using the included micro-USB cable to get
started. See page 28 for full charging instructions.
A. INSTALL BIKE ON TRAINER
1. Open the Legs to full extension and place the trainer flat on the
floor.
2. Pull back the Spring Pin and rotate the Magnet Arrays from
vertical to horizontal one at a time. The Spring Pin will seat itself
once the Magnet Array is in place.
3. Move the Speed Sensor to the side and out of the way.
!ALWAYS RETRACT THE SPRING PINS COMPLETELY BEFORE
ROTATING THE MAGNET ARRAYS. NEVER USE FORCE ON THE
MAGNET ARRAYS OR SPRING PINS.
9
4. Unscrew the Knobs, opening them all the way.
Tip: Moving the Calipers by hand contributes to wear and tear on the
motors.If your wheel will not easily fit between the Magnet Arrays
refer to Troubleshooting [page 34].
!ALWAYS ROTATE THE MAGNET ARRAY HORIZONTALLY AND PULL
THE SPEED SENSOR TO THE SIDE BEFORE MOUNTING THE BIKE ON
THE TRAINER TO AVOID DAMAGE TO THE TRAINER.
10
5. Install your bike on the trainer, with the Frame behind the bike,
and the Legs extended towards the front.
a. Back the bike into the trainer, aiming to keep the tire
centered over the central bolt.
b. Insert one end of the Skewer in a Skewer Cup and
tighten the Knob until the tire is centered. Repeat on
the other side.
c. Tighten both Knobs.
d. Tighten the Wing Nuts against the Frame, locking the
bike in place.
B. INSTALL A SPOKE MAGNET
1. Install the included Spoke Magnet on a spoke.
2. Align the Spoke Magnet with the tip of the Speed Sensor.
3. Adjust the Speed Sensor within 5mm-10mm (¼”-½”) of the Spoke
Magnet.
4. Turn the wheel a couple of revolutions slowly by hand. Check that
a. The Spoke Magnet will not hit your bike or the Speed Sensor.
b. The red light on the Electronics Housing flashes when the
Spoke Magnet passes the Speed Sensor.
Tip: If your wheel is not quite centered on your first try, tighten one
knob while loosening the other to shift the bike over.
Andere Handbücher für Halcyon
1
Inhaltsverzeichnis
Andere Stac Zero Fitnessgeräte Handbücher
