StarTech.com S2510U33USM Bedienungsanleitung
Manual Revision: 02/24/2016
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
S2510U33USM
USB 3.0 SATA USM™ SSD/HDD
Adapter and Enclosure
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Hard Drive Installation ..........................................................................2
Interfacing with S2510U33RUSM 5.25” Installation Bay.............................................................. 2
How to Use ..............................................................................................3
Disconnecting the Hard Drive.............................................................................................................. 3
Technical Support ..................................................................................5
Warranty Information............................................................................5
Instruction Manual
1
Introduction
Packaging Contents
• 2.5 in. USB Enclosure
• USM to USB 3.0 Interface Adapter
• USB 3.0 Micro USB Cable
• Instruction Manual
System Requirements
• 1x 2.5 in. SATA Hard Drive
• USB 3.0 (Backwards Compatible with USB 2.0 or 1.1) Compatible System
Instruction Manual
2
WARNING! Hard drives and storage docks require careful handling, especially when
being transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution. Be sure that you
are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
Hard Drive Installation
1. With the USB 3.0 to USM adapter removed from the S2510U33USM USM Enclosure,
remove the two screws on either side of the USM port, to remove the SATA plate.
2. Slide the inner tray forwards out of the housing.
3. To install the hard drive start by placing one side into the tray then lower the other
size into place until the drive snaps into place.
4. Install the tray back into the housing and replace the back plate ensuring that the
plate is aligned to the SATA connector.
5. Fix the two screws on the SATA plate back into place.
Interfacing with S2510U33RUSM 5.25 in. Installation Bay
Mount Drive
With the USB 3.0 to USM adapter removed from the S2510U33USM USM Enclosure,
gently slide the USM Enclosure Drive into the slot provided by the 5.25 in. USM drive
tray (S2510U33RUSM), until you feel full resistance.
Remove Drive
Press the drive eject button on the 5.25 in. USM drive tray (S2510U33RUSM). The USM
Enclosure will slide away from the installation bay slightly. Grasp the Enclosure with
your ngers and slide the drive the rest of the way out.
NOTE: It is important to eject or unmount the hard drive from your computer system
before physically removing the drive. See How to Use - Disconnecting the Hard Drive
section for instructions.
Instruction Manual
3
Interfacing with USB Controller
1. Connect the USM to USB 3.0 interface adapter to the enclosure through the USM
port.
2. Connect the USB 3.0 cable from the USB port on the adapter to an available USB 3.0
port on your computer system.
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, the drivers will install
automatically, and the inserted drive will be accessible as though it were installed
within the system.
Prior to using the drive, it will need to be formatted according to your operating
system requirements. To format your newly attached hard drive, or create partitions,
please consult the documentation that accompanied your operating system at the
time of purchase.
LED Indicator
The hard drive enclosure features an LED indicator that you can use to monitor drive
activity. The LED will ash while the hard drive is being accessed. Do not remove the
enclosure from the host computer while the LED is ashing, as it could damage the
drive or the enclosure, resulting in data loss.
Disconnecting the Hard Drive
Windows
1. Click the Safely remove Hardware and Eject Media icon, located in the task bar.
2. Click the Mass Storage Device from the list that appears.
3. Wait for the message indicating that it is now safe to remove the device.
NOTE: Removing the connected drive prior to receiving notication that it is safe to
do so, could result in losing or corrupting data stored on the drive. Once the Safe
to Remove Hardware message appears, please disconnect the enclosure from the
computer by removing the USB connection.
Instruction Manual
4
Mac OS X
1. To safely disconnect the attached drive from the host computer, close any windows
listing the contents of the removable drive.
2. Once all of the windows are closed, click on the USB storage icon on the desktop,
and drag it to the Trash Can icon on the desktop.
Allow 5 seconds before physically removing the enclosure/drive from the computer.
Initializing the Hard Drive
1. If the SATA Hard Drive is blank it may need to be initialized and formatted before
use. From the main Windows desktop, right-click My Computer (Computer in Vista/
7 / 8), then click Manage. In the new Computer Management window, click Disk
Management from the left window panel.
2. A dialog window should automatically appear, asking you to initialize the drive.
Depending on the version of Windows that you’re running, it will give you the
option of either creating an MBR or GPT disk. GPT (GUID partition) is required for
drives larger than 2TB but is not compatible with some older operating systems,
while MBR is supported by newer and older operating systems.
3. Once initialized, locate the disk labeled Unallocated (check the listed hard drive
capacity to conrm it’s the correct hard drive) and then right-click in the section that
says Unallocated and click New Partition.
4. Complete the on-screen instructions to create the partition.
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Inhaltsverzeichnis
Andere StarTech.com Adapter Handbücher
StarTech.com
StarTech.com ICUSB232HUB2 Bedienungsanleitung
StarTech.com
StarTech.com 109B-USBC-HDMI Bedienungsanleitung
StarTech.com
StarTech.com RJ45SPLITTER Bedienungsanleitung
StarTech.com
StarTech.com DKT30CHCPD Bedienungsanleitung
StarTech.com
StarTech.com USB2VGA Bedienungsanleitung
StarTech.com
StarTech.com TB2USB3ES Bedienungsanleitung
StarTech.com
StarTech.com V933536 Bedienungsanleitung
StarTech.com
StarTech.com DKT30CDVPD Bedienungsanleitung
StarTech.com
StarTech.com ICUSB232SM3 Bedienungsanleitung
StarTech.com
StarTech.com MDP2DPDVHD Bedienungsanleitung
StarTech.com
StarTech.com USB312SAT3CB Bedienungsanleitung
StarTech.com
StarTech.com ECUSB3S2 Bedienungsanleitung
StarTech.com
StarTech.com USB300WN2X2D Systemhandbuch
StarTech.com
StarTech.com MDVIHDMIMF Bedienungsanleitung
StarTech.com
StarTech.com Thunderbolt TB3DKM2DPL Bedienungsanleitung
StarTech.com
StarTech.com US1GC30SFP Bedienungsanleitung
StarTech.com
StarTech.com USB2VGADVI Bedienungsanleitung
StarTech.com
StarTech.com ICUSB232 Bedienungsanleitung
StarTech.com
StarTech.com USBBT1EDR4 Bedienungsanleitung
StarTech.com
StarTech.com USB32DPES Bedienungsanleitung
