StarTech.com SAT2M2NGFF25 Bedienungsanleitung
Manual Revision: 09/24/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
SAT2M2NGFF25
M.2 NGFF SSD to 2.5in SATA Adapter
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Assembled Adapter View......................................................................2
Assembled Adapter View ....................................................................................................................... 2
Open Adapter View .................................................................................................................................. 2
M.2 NGFF SSD Installation ....................................................................3
Hard Drive Initialization........................................................................10
Technical Support ..................................................................................11
Warranty Information............................................................................11
Instruction Manual
1
Introduction
Packaging Contents
• 1x M.2 NGFF SSD to 2.5” SATA Adapter
• 1x SSD mounting kit
• 1x Mini Screw driver
• 1x Instruction manual
System Requirements
• M.2 NGFF solid state drive (SSD)
• SATA Host Device
Instruction Manual
2
Assembled Adapter View
Assembled Adapter View
1. Top mounting holes
2. Side mounting holes
3. SATA DATA & Power Combo (7+15 pin)
4. HDD plate
5. HDD plate mounting holes
Open Adapter View
1. M.2 (NGFF) SSD Connector
2. Drive installation bracket
3. Drive length adjustment holes
4. HDD plate mounting holes
1
1
1
1
1
2
2
2
3
3
5
5
5
5
4 4
44
4
Instruction Manual
3
M.2 NGFF SSD Installation
WARNING:
SSD Drives and storage adapters require careful handling. If you are not careful
with your SSD Drive, lost data may result. Always handle your drive with caution. Be
sure that you are properly grounded by wearing an anti-static strap when handling
computer components or discharge yourself of any static electricity build-up by
touching a large grounded metal surface (such as the computer case) for several
seconds.
1. Remove the HDD plate from the bottom of the adapter case.
Note: the HDD plate mounting screws may need to be removed if the adapter has
already been assembled.
Instruction Manual
4
2. Determine if the drive installation bracket requires relocating by assessing your
drive length. The board is labeled with the respective drive types for length but if
your drive type is unknown,place your SSD next to the M.2 (NGFF) SSD connector,
note which drive installation hole matches the height of your SSD. If the bracket is
already installed in the correct position please proceed to step 4.
3. (Only required if the drive installation bracket requires relocating)
a) Carefully remove the main board from inside the adapter enclosure.
Instruction Manual
5
Note: It may require a small prying tool or tweezers to carefully remove the board.
b) Remove the nut holding the bracket in place on the reverse side using a
small set of plyers (Not included).
Instruction Manual
6
c) Reseat the drive installation bracket in the drive installation hole that
matches your SSD. Replace the removed nut on the reverse side by using a
small set of plyers (not included).
Instruction Manual
7
d) Carefully reseat the main board inside the adapter enclosure.
4. Using the included screw driver. Remove the screw located in the front of the hard
drive installation bracket.
Inhaltsverzeichnis
Andere StarTech.com Adapter Handbücher
StarTech.com
StarTech.com SATA35252X Bedienungsanleitung
StarTech.com
StarTech.com DKT31CVHPD3 Bedienungsanleitung
StarTech.com
StarTech.com U2M2E125 Bedienungsanleitung
StarTech.com
StarTech.com PCI100MMSC Bedienungsanleitung
StarTech.com
StarTech.com USB2DVIE2 Bedienungsanleitung
StarTech.com
StarTech.com Thunderbolt TB310G Bedienungsanleitung
StarTech.com
StarTech.com TBT3TBTADAP Bedienungsanleitung
StarTech.com
StarTech.com HD2DPVGADVI Bedienungsanleitung
StarTech.com
StarTech.com 120B-USBC-MULTIPORT Bedienungsanleitung
StarTech.com
StarTech.com USBBT1EDR4 Bedienungsanleitung
StarTech.com
StarTech.com USB312SAT3CB Bedienungsanleitung
StarTech.com
StarTech.com PCI150WN1X1 Bedienungsanleitung
StarTech.com
StarTech.com USB150WN1X1 Bedienungsanleitung
StarTech.com
StarTech.com FCREADMICRO3 Bedienungsanleitung
StarTech.com
StarTech.com DK30C2DAGPD Bedienungsanleitung
StarTech.com
StarTech.com MHD2VGA Bedienungsanleitung
StarTech.com
StarTech.com USB31000SA Bedienungsanleitung
StarTech.com
StarTech.com ICUSB232PROC Bedienungsanleitung
StarTech.com
StarTech.com USB2VGAPRO Bedienungsanleitung
StarTech.com
StarTech.com ICUSBANDR232 Bedienungsanleitung
