StarTech.com S2510BU33PW Bedienungsanleitung

Manual Revision: 07/29/2016

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

S2510BU33PW

USB 3.0 to 2.5”SATA III Enclosure w/Encryption

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Product Diagram ....................................................................................2

Top View ....................................................................................................................................................... 2

Front View.................................................................................................................................................... 2

Hardware Installation............................................................................3

How to Use ..............................................................................................5

Initial Setup ................................................................................................................................................. 5

Menu Options............................................................................................................................................. 6

Technical Support ..................................................................................9

Warranty Information............................................................................9

Instruction Manual

Introduction

Packaging Contents

• 1 x USB 3.0 to 2.5”SATA III Enclosure w/ Encryption

• 1 x USB 3.0 Cable

• 1 x Drive case

• 1 x Drive installation screws

• 1 x Mini screw driver

• 1 x Instruction manual

Note: It is recommended that the contents of this enclosure be regularly backed-up,

as lost passwords or hardware failure (SATA drive or enclosure) will result in the stored

data being unrecoverable.

System Requirements

• Computer system with available USB port

• 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)

Warning: To use AES encryption, the SATA drive must be initialized and formatted after

setup. This will erase all data on the drive.

Instruction Manual

Product Diagram

Top View

1. OLED Readout Display

2. Touchscreen Keypad

Front View

1. USB 3.0 Micro B port

Instruction Manual

Hardware Installation

WARNING! Hard drives and storage enclosures require careful handling, especially

when being transported. If you are not careful with your hard disk, lost data may

result. Always handle your hard drive and storage device with caution. Be sure that

you are properly grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up by touching a large

grounded metal surface (such as the computer case) for several seconds.

1. The back panel of the enclosure is held securely in place with two small screws. Use

the provided mini screwdriver to remove the screws.

NOTE: For brand new out of the box installations, this step is not required as the

screws are not installed.

2. Using the small groove located along the top edge of the enclosure, remove the

back panel to expose the interior drive bay.

Instruction Manual

3. Place the 2.5” SATA drive into the bay (label side down) and slide the drive onto the

SATA connector. Make sure the drive is fully seated.

CAUTION: To use AES encryption, the drive must be initialized and formatted after

setup. Do not place a drive containing data you wish to encrypt into the enclosure. The

data must be copied over after the enclosure has been setup.

4. Place the back panel back onto the enclosure and fasten using the small screws.

5. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to

a USB port on the host computer system.

Instruction Manual

How to Use

Initial Setup

1. When connected to a host computer for the rst time, the OLED readout will

prompt you to setup a password or not. If no password is used, the enclosure will

function as a standard external hard drive enclosure without any encryption.

2. If you have chosen to use a password you will receive a prompt informing you it will

be impossible to recover data without your password. Select “Yes” to continue.

3. After you have selected the option to continue to use a password, you will be

prompted to enter a 4 ~ 8 digit password. Press <Enter> when complete.

WARNING: If the password is lost, the data on the drive will not be recoverable.

4. Re-enter the password as conrmation and press <Enter>.

5. Once the password has been set up, the SATA drive must be initialized and formatted

before use. From the main Windows desktop, right-click on“My Computer”

(“Computer”in Vista/ 7 / 8), then select Manage. In the new Computer Management

window, select Disk Management from the left window panel.

6. A dialog window should automatically appear, asking your to initialize the drive.

Depending on the version of Windows, it will give you the option of either creating an

“MBR”or“GPT”disk. GPT (GUID partition) is not compatible with some older operating

systems, while MBR is supported by newer and older operating systems.

7. Once initialized, locate the Disk that says it is“Unallocated” (check the listed hard drive

capacity to conrm it’s the correct hard drive) and then right-click in the section that

says“Unallocated” and select “New Partition”.

Note: Losing the password or hardware failure (the SATA drive or enclosure) will result

in the data stored in the enclosure becoming unrecoverable. Removing the drive from

the enclosure or placing it into another S2510BU3PW enclosure will not allow access to

the data. It is recommended that all data stored on the enclosure also be backed up to

another location regularly to prevent any chance of losing your data.

Instruction Manual

Menu Options

Pressing the <Menu> button on the keypad will allow access to additional options for

the enclosure. Press the <UP> and <DOWN> arrow keys (<2>, <8>) to scroll through

the available options.

HDD Temp

Displays the current temperature of the installed SATA drive.

Note: Only compatible with select hard drives

USB Connection Speed

Displays the current USB connection mode (i.e. USB 3.0/ USB 2.0/ USB 1.0).

Write Protection

Enable write protection on the installed SATA drive, which prevents data from being

written to or deleted from the SATA drive. Data can only be read.

User Info

Conguration options for setting and displaying optional user info, such as a name (8

character limit) and phone number (20 character limit). A name can be congured to

display on the OLED display on startup, instead of the standard logo and the phone

number can be set to display when an incorrect password is entered. This can be used

as contact info for returning misplaced units. Check the “User Info Display” option to

enable this feature.

Instruction Manual

When entering characters for the“Name”, refer to the following chart. Enter the

code for the desired character and then press <Enter>. When nished entering all

characters, press the <Menu> button to save and exit

0sp 14 .28 <42 J56 X70 f 84 t

1!15 /29 =43 K57 Y71 g 85 u

2“16 030 >44 L58 Z72 h 86 v

3#17 131 ?45 M59 [73 i 87 w

4$18 232 @46 N60 \74 j 88 x

5%19 333 A47 O61 ]75 k 89 y

6&20 434 B48 P62 ^76 l 90 z

7‘21 535 C49 Q63 _77 m 91 {

8(22 636 D50 R64 `78 n 92 |

9)23 737 E51 S65 a79 o 93 }

10 *24 838 F52 T66 b80 p 94 ~

11 +25 939 G53 U67 c81 q 95 [ ]

12 ,26 :40 H54 V68 d82 r

13 -27 ;41 I55 W69 e83 s

NOTE: There is no backspace, so if a wrong character is entered, you must exit and

re-enter the menu to start over.

Initialization of HDD Usage Mode

WARNING: This will result in all data on the drive being lost.

The installed SATA drive can be re-initialized while connected to the host computer,

which will result in the drive partition being deleted and drive being treated as a

new drive. The SATA drive will need to be re-partitioned and formatted on the host

computer afterwards.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere StarTech.com Gehäuse Handbücher

StarTech.com

StarTech.com M2-USB-C-NVME-SATA Bedienungsanleitung

StarTech.com

StarTech.com ESATCASE2 Bedienungsanleitung

StarTech.com

StarTech.com SAT3510U3V Bedienungsanleitung

StarTech.com

StarTech.com IDECASE525F Bedienungsanleitung

StarTech.com

StarTech.com SAT3520UERGB Bedienungsanleitung

StarTech.com

StarTech.com RK1520WALHM Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe SAT2510BU2B Bedienungsanleitung

StarTech.com

StarTech.com RK2537BKM Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe SAT2510BU2B Bedienungsanleitung

StarTech.com

StarTech.com RK616WALM Bedienungsanleitung

StarTech.com

StarTech.com SAT3510U2V Bedienungsanleitung

StarTech.com

StarTech.com INFOSAFE IDE2510U2 Bedienungsanleitung

StarTech.com

StarTech.com InfoSafe UNI3510U2E Bedienungsanleitung

StarTech.com

StarTech.com SATSAS225ODD Bedienungsanleitung

StarTech.com

StarTech.com SATCASE25OTG Bedienungsanleitung

StarTech.com

StarTech.com S251BMU313 Bedienungsanleitung

StarTech.com

StarTech.com S251BU31C3CB Bedienungsanleitung

StarTech.com

StarTech.com 4POSTRACK36 Bedienungsanleitung

StarTech.com

StarTech.com RK2536BKF Bedienungsanleitung

StarTech.com

StarTech.com HSB2535SATBK Bedienungsanleitung

StarTech.com

StarTech.com S2510SM12U33 Bedienungsanleitung

StarTech.com

StarTech.com S2510BMU33CB Systemhandbuch

StarTech.com

StarTech.com InfoSafe SAT3510U2B Bedienungsanleitung

StarTech.com

StarTech.com S354UFER Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung