Sundstrom SR 200 Technisches Handbuch

2020-04-08

OI03H-1018 SR 200 Airline 1

Operation instruction

SR 200 Airline

Compressed air-line full face mask

Revision: 04

General information

Instructions for use for SR 200 Airline should be read before use.

SR 200 can be used in three different configurations:

In application with filters from Sundström in accordance with EN 136:1998.

In application with fan unit SR 500 or SR 700 in accordance with EN 12942:1998 class TM3.

SR 200 Airline is a compressed air full face mask with filter backup in accordance with EN 14594:2005.

When selecting equipment for SR 200 Airline some of the factors that should be considered are as follows:

• Type of pollutant

• Concentrations

• Work intensity

• Protection requirements in addition to respiratory protective advice.

Risk analysis should be carried by a person who has suitable training and experience in the area.

2020-04-08

OI03H-1018 SR 200 Airline 2

Breathable air

Breathable air shall meet at least the following purity requirements:

• the pollutants shall be maintained at a minimum and must never exceed the hygienic limit value.

• the content of mineral oil in the air must be so low that the air will have no oil smell (the threshold of smell is

around 0.3 mg/m3 ).

• the air shall have a sufficiently low dew point to avoid internal freezing of the equipment.

In the event of uncertainty as to whether the above demands have been met, a filter such as the Sundström

type SR 99-1 compressed air filter should be connected.

2020-04-08

OI03H-1018 SR 200 Airline 3

Unpacking SR 200 Airline

Packing list:

• Facepiece with breathing hose

• Control valve

• Belt

• Sealing plug

• Sealing cover

• Pre-filter holder

• Flow meter

• Filter adapter

• User instructions

2020-04-08

OI03H-1018 SR 200 Airline 4

1. Check before use

2020-04-08

OI03H-1018 SR 200 Airline 5

1.1 Check that the mask is

complete, correctly

assembled, thoroughly

cleaned and undamaged.

Check particularly carefully

the inhalation and exhalation

membranes and their seats.

The membranes are

consumables and must be

replaced if there are any

signs of damage or ageing.

1.2 The membranes are

consumables and must be

replaced if there are any

signs of damage or ageing.

Check the condition of the

head harness. The head

harness is a consumable item

and should be replaced if

there are any signs of wear or

reduced elasticity.

1.3 Check that the seal at the

bottom of the filter connection

is in good condition.

Check before use

2020-04-08

OI03H-1018 SR 200 Airline 6

1.4 Check that the air flow -

measured through the mask -

is at least 150 l/min.

Connect the breathing hose

of the mask to the control

valve.

1.5 Connect the compressed

air supply tube to the control

valve.

1.6 Turn the control valve

knob anti-clockwise as far as

it will go, in order to throttle

the air flow rate to a

minimum.

2. Functional check

2020-04-08

OI03H-1018 SR 200 Airline 7

2.1 Place the facepiece in the

bag and grip the opening of

the bag so that it seals

around the breathing hose.

Grip the flow meter with the

other hand and hold it so that

it points vertically up from the

bag.

2.2 Read the position of the

ball in the tube. It should float

level with or just above the

marking on the tube.

If the flow rate is below the minimum value, check that

• The flow meter is vertical.

• The float can move freely.

• The air supply is not restricted by kinks or other restrictions in the

hoses.

3. Filter

2020-04-08

OI03H-1018 SR 200 Airline 8

3.1 During work in

atmospheres containing both

particulates and gases/vapors

(such as spray painting) the

particulate filter and chemical

cartridge should be

combined. Press the

filter/cartridge together so that

the arrows on the particulate

filter point towards the

chemical cartridge.

3.2 Fit the filter/combined

filter in the face piece so that

the arrows on the filter points

towards the user’s face.

Carefully check that the edge

of the filter is in the internal

groove of the filter mounting

all round.

3.3 Pre-filter prevents

premature clogging of the

main filter. The pre-filter

holder prevents damage to

the main filter. N.B. The pre-

filter is a pre-filter only and

cannot be used as a

substitute for particulate filter.

3.4 Turn the filters into the

face piece. Screw until the

thread reaches the seal at the

bottom of the filter

connection, then another 45

degrees.

4. Putting the equipment on

2020-04-08

OI03H-1018 SR 200 Airline 9

4.1 Put the belt on and adjust

the length.

4.2 Arrange the control valve

in a way that allows easy

adjustment of the flow rate

and a strict watch over the

breathing hose, i. e. it must

not be placed on the back of

the waist.

4.3 Filter

If the equipment is to be used

with a back-up filter, mount

the supplied adapter in the

filter mounting and fit the filter

4. Putting the equipment on

4.1 Put the belt on and adjust

the length.

4.2 Arrange the control valve

in a way that allows easy

adjustment of the flow rate

and a strict watch over the

breathing hose, i. e. it must

not be placed on the back of

the waist.

5. Mask –Tightness check

2020-04-08

OI03H-1018 SR 200 Airline 10

Check the fit of the mask if you intend to use a back-up filter.

If any leakage is detected, check the inhalation and exhalation valves

or adjust the straps of head harness. Repeat the fit check until there

is no leakage.

Leakage may occur in cases such as if you wear a beard or

sideboards or if your face is unshaven or deeply wrinkled, if you wear

glasses, or if the exhalation valves are defective or dirty.

5.1 Blank off the filter by

using the sealing cover.

5.2 Draw a deep breath and

hold your breath for ten

seconds.

If the fit is good, the mask will

be pressed against your face.

Andere Handbücher für SR 200

Inhaltsverzeichnis

Andere Sundstrom Atemwegsprodukt Handbücher

Sundstrom

Sundstrom SR 900 Bedienungsanleitung

Sundstrom

Sundstrom SR561 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR570 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR 200 Technisches Handbuch

Sundstrom

Sundstrom SR562 Installations- und Benutzerhandbuch

Sundstrom

Sundstrom SR562 Bedienungsanleitung

Sundstrom

Sundstrom SR 90 Airline Bedienungsanleitung

Sundstrom

Sundstrom SR 99 Bedienungsanleitung

Sundstrom

Sundstrom SR 200 Bedienungsanleitung

Sundstrom

Sundstrom SR 550 Bedienungsanleitung

Sundstrom

Sundstrom SR 100 M/L Handbuch

Sundstrom

Sundstrom SR 500 EX Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

Sundstrom

Sundstrom H06-0321 Bedienungsanleitung

Sundstrom

Sundstrom SR 200 Bedienungsanleitung

Sundstrom

Sundstrom SR570 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 EX Bedienungsanleitung

Sundstrom

Sundstrom SR 200 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

Sundstrom

Sundstrom SR 520 Montageanleitung

Sundstrom

Sundstrom SR 100 Bedienungsanleitung

Sundstrom

Sundstrom SR 700 Bedienungsanleitung

Sundstrom

Sundstrom SR561 Technisches Handbuch

Sundstrom

Sundstrom SR 63 Bedienungsanleitung

Beliebte Atemwegsprodukt Handbücher anderer Marken

Omron

Omron COMP A-I-R NE-C801 Bedienungsanleitung

CERES

CERES nosko nebulizer kit Bedienungsanleitung

Dr.Frei

Dr.Frei NE-SM1 Bedienungsanleitung

North

North 5400 series Bedienungsanleitung

John Bunn

John Bunn Neb-u-Lite LX2 Bedienungsanleitung

DeVilbiss

DeVilbiss UltraNeb Bedienungsanleitung

Sperian

Sperian Panther Hip-Pac P9684 Series Bedienungsanleitung

Dräger

Dräger X-plore 6570 Bedienungsanleitung

3M 8000 Series Bedienungsanleitung

Respironics

Respironics SideStream HS860 Bedienungsanleitung

JARDIBRIC

JARDIBRIC KPBRU20 Bedienungsanleitung

Ombra

Ombra 63506 Bedienungsanleitung

Lotus

Lotus M-9520A Bedienungsanleitung

Philips

Philips Respironics EE Leak 1 AF541 Bedienungsanleitung

EVOLU

EVOLU Nano AiR MINI Bedienungsanleitung

Ambu

Ambu SPUR II Bedienungsanleitung

MSA AUER

MSA AUER 3S-PF Bedienungsanleitung

MSA

MSA C420 Bedienungsanleitung