Supermicro Supero SuperServer 5018A-MLTN4 Bedienungsanleitung

SUPER

SUPERSERVER

5018A-MLTN4

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: April 23, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018A-MLTN4.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018A-MLTN4 is a 1U rackmount server based on the SC512L-

200B server chassis and the Super A1SAM-2550F motherboard. Please refer to

our web site for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the A1SAM-2550F motherboard

and the SC512L-200B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018A-MLTN4

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018A-MLTN4.

iii

Preface

SUPERSERVER 5018A-MLTN4 User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the A1SAM-2550F motherboard, in-

cluding the locations and functions of connectors, headers and jumpers. Refer to

this chapter when adding or removing main memory and when reconﬁguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC512L-200B chassis. You should

follow the procedures given in this chapter when installing, removing or reconﬁgur-

ing Serial ATA or peripheral drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Error Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 5018A-MLTN4 User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots....................................................................................... 1-2

I/O Ports..........................................................................................................1-2

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

SATA Subsystem.............................................................................................1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rail Extension..................................................................2-5

Installing the Outer Rails to the Rack.............................................................2-6

Installing the Chassis into a Rack...................................................................2-8

Mid-Mount Telco Rack..................................................................................... 2-9

Installing the Chassis into a Rack in Mid-Mount Position ..............................2-9

vii

Table of Contents

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail LED................................................................................... 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 SATA Drive Carrier LEDs................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Motherboard Installation..................................................................................5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables.................................................................................5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 Rear I/O Ports................................................................................................. 5-4

5-5 Onboard Processor and Heatsink................................................................... 5-5

5-6 Installing Memory Modules.............................................................................5-5

viii

SUPERSERVER 5018A-MLTN4 User's Manual

Installing & Removing DIMMs......................................................................... 5-5

Memory Support.........................................................................................5-6

Memory Population Guidelines....................................................................... 5-6

5-7 Adding PCI Cards........................................................................................... 5-7

5-8 Motherboard Details........................................................................................ 5-8

Motherboard Layout........................................................................................ 5-8

A1SAM-2550F Quick Reference Table........................................................... 5-8

5-9 Connector Deﬁnitions ...................................................................................5-10

ATX Power Connector..............................................................................5-10

Power Button ........................................................................................... 5-10

Reset Button............................................................................................. 5-10

Power Fail LED........................................................................................ 5-10

Overheat (OH)/Fan Fail/PWR Fail/UID LED.............................................5-11

NIC2 (LAN2) LED......................................................................................5-11

HDD LED...................................................................................................5-11

Power On LED..........................................................................................5-11

NMI Button ............................................................................................... 5-12

Fan Headers............................................................................................. 5-12

Chassis Intrusion......................................................................................5-12

Universal Serial Bus (USB)...................................................................... 5-12

Serial Ports...............................................................................................5-13

Power SMB (I2C) Connector .................................................................... 5-13

Onboard Speaker (SP1)........................................................................... 5-13

Power LED/Speaker................................................................................. 5-13

DOM Power Connector............................................................................ 5-14

TPM/Port 80 Header................................................................................ 5-14

Overheat LED/Fan Fail ............................................................................ 5-14

LAN3/LAN4 LED Indication Header.........................................................5-14

LAN (Ethernet) Ports................................................................................ 5-15

Unit Identiﬁer Switch/UID LED Indicators ................................................5-15

System Management Bus Header...........................................................5-16

Standby Power......................................................................................... 5-16

Overheat LED Header.............................................................................. 5-16

5-10 Jumper Settings............................................................................................ 5-17

Explanation of Jumpers ................................................................................ 5-17

CMOS Clear............................................................................................. 5-17

LAN1/LAN2 Enable/Disable.....................................................................5-17

VGA Enable/Disable................................................................................. 5-18

Watch Dog................................................................................................ 5-18

Table of Contents

BMC Enable ............................................................................................5-18

PCI-E Slot SMB Enable........................................................................... 5-18

BIOS Recovery Enable............................................................................ 5-19

USB Wake-Up Enable..............................................................................5-19

5-11 Onboard Indicators........................................................................................5-19

LAN Port LEDs.........................................................................................5-19

IPMI Dedicated LAN LEDs....................................................................... 5-19

Onboard Power LED ............................................................................... 5-20

Overheat/PWR Fail/Fan Fail LED............................................................ 5-20

Unit Identiﬁcation LED..............................................................................5-20

5-12 SATA Ports....................................................................................................5-21

SATA Ports ............................................................................................... 5-21

5-13 Installing Software.........................................................................................5-22

SuperDoctor® 5 ............................................................................................ 5-23

5-14 Onboard Battery............................................................................................5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover .........................................................................6-2

6-4 System Fan..................................................................................................... 6-3

6-5 Installing Hard Drives......................................................................................6-5

6-6 Installing a DVD or CD-ROM Drive ................................................................6-7

6-7 PCI Slot Setup ................................................................................................ 6-8

6-8 Power Supply.................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 IPMI Conﬁguration ........................................................................................7-20

7-4 Event Logs....................................................................................................7-22

7-5 Security Settings........................................................................................... 7-24

7-6 Boot Settings.................................................................................................7-27

7-7 Save & Exit ................................................................................................... 7-29

SUPERSERVER 5018A-MLTN4 User's Manual

Appendix A BIOS Post Error Codes

Appendix B System Speciﬁcations

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro 7044H-82 Bedienungsanleitung

Supermicro

Supermicro A+ AS-4023S-TRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SBA-7121M-T1 Handbuch

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110D-4C-FRAN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013A-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro E100-9APP Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-421E-1T3N Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018U-TR4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-111C-NR Bedienungsanleitung

Supermicro

Supermicro SCF424 Series Bedienungsanleitung

Supermicro

Supermicro Supero A+ SERVER 1042G-TF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5014C-MF 5014C-MF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro A+ AS-5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer E200-8D Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2014S-TR Bedienungsanleitung

Supermicro

Supermicro 2027R-E1R24L Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung