Supermicro SUPERSERVER 1025TC-10G Bedienungsanleitung

SUPER

SUPERSERVER 1025TC-T

SUPERSERVER 1025TC-10G

USER’S MANUAL

Revision 1.0

Manual Revision 1.0

Release Date: June 20, 2008

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 1025TC-

T/1025TC-10G. Installation and maintenance should be performed by experienced

technicians only.

The SuperServer 1025TC-T/1025TC-10G is a 1U Twin (two serverboards in a 1U

chassis) rackmount server based on the SC809T-780B server chassis and two

Super X7DCT/X7DCT-10G serverboards. The X7DCT/X7DCT-10G supports dual

Intel® Xeon® 5400/5300/5200/5100 Series processors. See the Supermicro web

site for details.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7DCT/X7DCT-10G

serverboard and the SC809T-780B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 1025TC-

T/1025TC-10G into a rack and check out the server conﬁguration prior to power-

ing up the system. If your server was ordered without the processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

SUPERSERVER 1025TC-T/1025TC-10G User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1025TC-T/1025TC-10G.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7DCT/X7DCT-10G serverboard,

including the locations and functions of connectors, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC809T-780B 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 1025TC-T/1025TC-10G User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Ethernet Ports ................................................................................................. 1-2

Onboard Controllers/Ports .............................................................................. 1-3

ATI Graphics Controller................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-5

System Power ................................................................................................. 1-5

SATA Subsystem............................................................................................. 1-5

Control Panel .................................................................................................. 1-5

Rear I/O Panel ................................................................................................ 1-5

Cooling System ............................................................................................... 1-5

1-4 1U Twin: System Notes................................................................................... 1-6

System Power ................................................................................................. 1-6

SATA Backplane/Drives................................................................................... 1-6

1-5 Contacting Supermicro.................................................................................... 1-7

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the Server into a Rack..................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

vii

Table of Contents

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into a Rack..................................................................... 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Preparing to Power On ................................................................................... 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 SATA Drive Carrier LEDs ................................................................................ 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-4

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Processor and Heatsink Installation ............................................................... 5-5

Installing the Processor ................................................................................. 5-5

Installing the Heatsink..................................................................................... 5-7

Removing the Heatsink................................................................................... 5-7

5-6 Installing Memory ............................................................................................ 5-8

5-7 PCI Add-on Cards ......................................................................................... 5-10

viii

SUPERSERVER 1025TC-T/1025TC-10G User's Manual

5-8 Serverboard Details .......................................................................................5-11

X7DCT/X7DCT-10G Quick Reference.......................................................... 5-12

5-9 Connector Deﬁnitions.................................................................................... 5-13

5-10 Jumper Settings ............................................................................................ 5-17

5-11 Onboard Indicators........................................................................................ 5-19

5-12 Installing Additional Drivers........................................................................... 5-20

5-13 Conﬁguring Supero Doctor III ....................................................................... 5-21

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

6-4 Air Shrouds ..................................................................................................... 6-4

6-5 Drive Bay Installation/Removal ....................................................................... 6-5

Accessing the Drive Bays ............................................................................... 6-5

6-6 Power Supply .................................................................................................. 6-7

Power Supply Failure...................................................................................... 6-7

Replacing the Power Supply........................................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup ............................................................................................ 7-2

7-4 Advanced Setup.............................................................................................. 7-6

7-5 Security ......................................................................................................... 7-20

7-6 Boot............................................................................................................... 7-22

7-7 Exit ................................................................................................................ 7-23

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 1025TC-T/1025TC-10G is a "1U Twin" server comprised of the

SC809T-780B 1U chassis and two (twin) X7DCT/X7DCT-10G serverboards. Please

refer to our web site for information on operating systems that have been certiﬁed

for use with the 1025TC-T/1025TC-10G (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components may have

been included with the 1025TC-T/1025TC-10G, as listed below.

Four (4) CPU heatsinks (SNK-P0017)

SATA Accessories:

Eight (8) SATA hard drive carriers (MCP-220-00001-03)

Two (2) internal SATA backplanes (BPN-SAS-809T)

Two (2) SATA cable sets (CBL-0201L)

Two (2) PCI-E x16 riser cards (RSC-R1U-E16R)

Six (6) 4-cm high-performance fans (FAN-0085L4)

Rackmount hardware with screws (CSE-PT51L):

Two (2) rack rail assemblies

Six (6) brackets for mounting the rack rails in a rack/telco rack

One (1) CD containing drivers and utilities

SuperServer 1025TC-T/1025TC-10G User's Manual

•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1025TC-T/1025TC-10G User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 1025TC-T/1025TC-10G lies two X7DCT/X7DCT-

10G dual processor serverboards, which are based on Intel's 5100 chipset. Below

are the main features of the X7DCT/X7DCT-10G. Note that the features on each

board are doubled for the server.

Processors

Each X7DCT/X7DCT-10G supports dual Intel® Xeon® 5400/5300/5200/5100 Series

processors. Please refer to our web site for a complete listing of supported proces-

sors (www.supermicro.com).

Memory

The X7DCT/X7DCT-10G has six 240-pin DIMM sockets that can support up to 48

GB of registered ECC DDR2-667/533 SDRAM. Memory can be installed in both

interleaved (dual-channel) and non-interleaved (single-channel) conﬁgurations. All

memory modules used to populate the system should be the same size, type and

speed.

Serial ATA

The South Bridge (ICH9R) of the chipset includes a Serial ATA controller for six

Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane

that provides power, bus termination and conﬁguration settings. RAID 0, 1, 5 and 10

are supported (RAID 5 is not supported by Linux OS). Refer to the support area

of our web site for procedures on setting up RAID on your system.

PCI Expansion Slots

Each X7DCT/X7DCT-10G board has one PCI-Express 2.0 x16 slot, so two PCI-

Express 2.0 x16 slots are provided in the server. In the 1025TC-T/1025TC-10G

server conﬁguration, riser cards have been pre-installed to support two low-proﬁle

PCI-Express x16 add-on cards.

Ethernet Ports

Two Intel® network controllers (one 82573V and one 82573L) are integrated into

each of the serverboards to support a total of four Gigabit LAN ports (100/1000Base-

T/1000BaseTX, RJ45 output).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 8028B-TR3F Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SSG-5049P-E1CR45L Betriebsanleitung

Supermicro

Supermicro SuperServer 5019S-MN4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8045C-3R Bedienungsanleitung

Supermicro

Supermicro SuperStorage 2029P-E1CR48H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018U-TR4+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SC847 CHASSIS SERIES Bedienungsanleitung

Supermicro

Supermicro AS-4020A-8R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-CDNRT+ Bedienungsanleitung

Supermicro

Supermicro Supero 5015B-MR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6011D Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E302-12A-4C Bedienungsanleitung

Supermicro

Supermicro Supero 6016T-6F Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-820GH-TNR2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029U-T Series Bedienungsanleitung

Supermicro

Supermicro SBI-7427R-SH Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E403-9D-16C-IPD2 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-621E-1C3N Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-12TN4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung