Supermicro 8025C-3R Bedienungsanleitung

SUPER

SUPERSERVER 8025C-3R

USER’S MANUAL

Revision 1.0a

Manual Revision 1.0a

Release Date: December 24, 2008

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDINGTHE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 8025C-3R. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 8025C-3R is a high-end quad processor server based on the

SC828TQ-R1200 2U rackmount server chassis and the Super X7QC3 serverboard.

The X7QC3 supports four Intel® Xeon MP processors. Please refer to our web site

for an up-to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7QC3 serverboard

and the SC828TQ-R1200 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 8025C-3R into

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8025C-3R.

iii

Preface

SUPERSERVER 8025C-3R User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7QC3 serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC828TQ-R1200 2U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SAS or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: HostRAID Setup Guidelines

Appendix D: System Speciﬁcations

Preface

Notes

SUPERSERVER 8025C-3R User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial Attached SCSI (SAS) ..........................................................................1-2

Serial ATA (SATA) ..........................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

ATI Graphics Controller...................................................................................1-3

IPMI.................................................................................................................1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

SAS Subsystem.............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview.............................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................ 2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rails ................................................................................. 2-4

Installing the Outer Rails.................................................................................2-4

vii

Table of Contents

Locking Tabs .............................................................................................. 2-4

Installing the Server into the Rack.................................................................. 2-5

2-5 Checking the Serverboard Setup.................................................................... 2-6

2-6 Preparing to Power On................................................................................... 2-7

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Power Fail.......................................................................................................3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 SAS Drive Carrier LEDs ................................................................................. 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel.........................................................................5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

5-6 Installing Memory............................................................................................ 5-8

Memory Support..............................................................................................5-8

5-7 Adding PCI Add-On Cards.............................................................................. 5-9

5-8 Serverboard Details ...................................................................................... 5-10

X7QC3 Quick Reference ...............................................................................5-11

viii

SUPERSERVER 8025C-3R User's Manual

5-9 Connector Deﬁnitions ...................................................................................5-12

5-10 Jumper Settings............................................................................................ 5-18

5-11 Onboard Indicators........................................................................................5-22

5-12 Floppy, IDE, and SAS Ports.......................................................................... 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

Unpacking .......................................................................................................6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans.................................................................................. 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays............................................................................... 6-4

SAS Drive Installation..................................................................................... 6-5

SAS Drive Backplane......................................................................................6-7

6-5 Power Supply.................................................................................................. 6-8

Power Supply Failure......................................................................................6-8

Removing/Replacing the Power Supply.......................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Settings.......................................................................................... 7-3

7-5 Security Settings........................................................................................... 7-23

7-6 Exit Options................................................................................................... 7-24

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C HostRAID Setup Guidelines

Appendix D System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 8025C-3R is a high-end server that is comprised of two main

subsystems: the SC828TQ-R1200 2U server chassis and the X7QC3 quad Intel

Xeon processor serverboard. Please refer to our web site for information on op-

erating systems that have been certiﬁed for use with the SuperServer 8025C-3R

(www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the SuperServer 8025C-3R, as listed below:

Six (6) 8-cm hot-swap chassis fans (FAN-0099L)

•

One (1) air shroud (MCP-310-82801-0N)•

One (1) air shroud (MCP-310-00032-00)•

One (1) slim DVD-ROM drive (DVM-PNSC-824B)•

One (1) IDE cable for DVD drive (CBL-0139L)•

One (1) rail set (MCP-290-00013-00)•

One (1) Super Server 8025C-3R User's Manual•

SAS Accessories•

One (1) SAS backplane (BPN-SAS-828TQ)

Two (2) SAS iPass cables (CBL-0188L)

Six (6) hot-swap drive carriers (MCP-220-00001-01)

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 8025C-3R User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 8025C-3R lies the X7QC3, a quad processor

serverboard based on the Intel 7300 chipset. Below are the main features of the

X7QC3. (See Figure 1-1 for a block diagram of the 7300 chipset).

Processors

The X7QC3 supports four Intel Xeon MP 7300/7200 Series processors. Please

refer to the serverboard description pages on our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X7QC3 has 24 240-pin DIMM slots that can support up to 192 GB of ECC

FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Single channel, two-channel

interleaved and four-channel interleaved memory are all supported. Modules of the

same size and speed should be used. See Chapter 5 Section 5 for details.

Serial Attached SCSI (SAS)

An onboard LSI-1068E Serial Attached SCSI (SAS) controller is integrated into

the X7QC3, which supports eight SAS hard drives with SES2. The SAS drives are

connected to a backplane that provides power, bus termination and conﬁguration

settings and are hot-swappable units. Note: The operating system you use must

have RAID support to enable the hot-swap capability and RAID function of the

SAS drives. RAID 0, 1 and 10 are supported. (RAID 5 is also supported with an

optional i-Button installed.)

Serial ATA (SATA)

ASATAcontroller is integrated into the South Bridge (ESB2E) section of the chipset

to provide a six-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 supported.

The Serial ATA drives are hot-swappable units.

PCI Expansion Slots

The X7QC3 has two PCI-Express x8 slots, one PCI-Express x4 slot and one PCI-X

133 MHz slot. Only low-proﬁle cards are supported.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-220HE-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019P-WT Bedienungsanleitung

Supermicro

Supermicro Supero A+ SERVER 1042G-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

Supermicro

Supermicro AS-1114CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-520P-ACTR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740A-T Bedienungsanleitung

Supermicro

Supermicro AS-1040C-8 Bedienungsanleitung

Supermicro

Supermicro SBI-7428R-C3 Bedienungsanleitung

Supermicro

Supermicro 2027R-E1R24L Bedienungsanleitung

Supermicro

Supermicro AS -2024S-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1017R-WR Bedienungsanleitung

Supermicro

Supermicro A+ AS-1125HS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E403-9D-16C-IPD2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221HE-FTNR Bedienungsanleitung

Supermicro

Supermicro 7044H-32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-82 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6016T-URF4+ Bedienungsanleitung

Supermicro

Supermicro 5015M-T Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-MT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung