Supermicro SUPERSERVER 5016i-URF Bedienungsanleitung

SUPERSERVER

5016i-URF

SUPER ®

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: February 21, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5016i-URF. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 5016i-URF is a high-end server based on the SC815TQ-R450U

1U rackmount chassis and the Super X8SIU-F single processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8SIU-F serverboard and the

SC815TQ-R450U chassis, which comprise the SuperServer 5016i-URF.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5016i-URF

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

SUPERSERVER 5016i-URF User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5016i-URF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8SIU-F serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-R450U server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

UIO..................................................................................................................1-2

Serial ATA........................................................................................................1-2

I/O Ports.......................................................................................................... 1-2

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

PCI Expansion Slots....................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rails .................................................................................2-5

Installing the Outer Rails.................................................................................2-5

Installing the Server into the Rack.................................................................. 2-6

SUPERSERVER 5016i-URF User's Manual

vii

Table of Contents

Installing the Server into a Telco Rack...........................................................2-7

2-6 Checking the Motherboard Setup................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons.....................................................................................3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

3-4 Hard Drive Carrier LEDs.................................................................................3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Processor and Heatsink Installation................................................................5-2

Installing the LGA1156 Processor .................................................................5-2

Installing a Passive CPU Heatsink .................................................................5-4

Removing the Heatsink...................................................................................5-4

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables.................................................................................5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel.........................................................................5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Population Guidelines....................................................................... 5-9

viii

5-6 Adding PCI Cards..........................................................................................5-11

5-7 Motherboard Details...................................................................................... 5-12

X8SIU-F Quick Reference.............................................................................5-13

5-8 Connector Deﬁnitions ...................................................................................5-15

5-9 Jumper Settings............................................................................................ 5-22

5-10 Onboard Indicators........................................................................................5-24

5-11 SATA Drive Connections............................................................................... 5-25

5-12 Installing Drivers and Utilities........................................................................5-26

SuperDoctor III.............................................................................................. 5-27

5-13 Onboard Battery............................................................................................ 5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure.........................................................................................6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Removing the Front Bezel..............................................................................6-4

Accessing the Drive Bays...............................................................................6-5

Hard Drive Installation.....................................................................................6-6

DVD-ROM and Floppy Drive Installation........................................................6-8

6-5 Power Supply.................................................................................................. 6-9

Power Supply Failure.................................................................................6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-20

7-5 Boot Settings ................................................................................................ 7-21

7-6 Exit Options................................................................................................... 7-22

Appendix A POST Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 5016i-URF User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 5016i-URF is a high-end server comprised of two main subsys-

tems: the SC815TQ-R450UBP 1U server chassis and the X8SIU-F single processor

motherboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5016i-URF, as listed below:

 One (1) slim DVD-ROM drive (DVM-PNSC-DVD-SBT)

 Three (3) sets of 4-cm counter-rotating fans (FAN-0086L4)

 One (1) DVD cable (CBL-0341L)

 One (1) passive CPU heatsink (SNK-P0046)

 Riser Cards: (see Section 5-6 for details)

One (1) RSC-R1UU-E8R+ for low-proﬁle PCI-E card

One (1) RSC-R1UU-UE8 for UIO & PCI-E card

 SATA Accessories

One (1) SATA backplane (BPN-SAS-815TQ)

Four (4) SAS/SATA drive carriers (MCP-220-00024-0B)

 One (1) rackmount kit (CSE-PT51L)

 One (1) CD containing drivers and utilities

 SuperServer 5016i-URF User's Manual

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5016i-URF User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 5016i-URF lies the X8SIU-F, a single processor

motherboard based on Intel's 3420 chipset. Below are the main features of the

X8SIU-F (see Figure 1-1 for a block diagram of the chipset).

Processors

The X8SIU-F supports single Intel®Xeon®3400 and L3400 Series, CoreTM i5 Dual

Core, CoreTM i3, Pentium®and Celeron®processors in an LGA1156 socket. Please

refer to the motherboard description pages on our web site for a complete listing

of supported processors.

Memory

The X8SIU-F has six DIMM sockets that can support supporting up to 16 GB

of UDIMM or 32 GB of RDIMM DDR3-1333/1066/800 memory. Please refer to

Chapter 5 for installing memory.

UIO

The X8SIU-F is a specially-designed motherboard that features Supermicro's UIO

(Universal I/O) technology. UIO motherboards have a PCI-Express x8 connector that

can support any one of several types of UIO card types to add SAS ports, additional

LAN ports, etc. to the motherboard. This allows the user to tailor the motherboard to

their own needs. Note: the 5016i-URF does not come with a UIO card installed.

Serial ATA

An on-chip (ICH9R) SATA controller is integrated into the X8SIU-F to provide a

six-port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 supported.

The SATA drives are hot-swappable units. Note: The operating system you use

must have RAID support to enable the hot-swap capability and RAID function of

the Serial ATA drives. Documentation on RAID setup guidelines can be found on

our web site.

I/O Ports

The color-coded I/O ports include one COM port, a VGA(monitor) port, two USB 2.0

ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports. A dedicated

IPMI LAN port is also included.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028BT-HTR+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-ACR12H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014L-T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-MTR Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E403-12P-FN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FN5T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028TR-T Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6029P-E1CR12H Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-611E-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-WR Bedienungsanleitung

Supermicro

Supermicro 1012A-MTF Bedienungsanleitung

Supermicro

Supermicro AS-1115HS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GU-TNXR Bedienungsanleitung

Supermicro

Supermicro SBA-7222G-T2 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015CS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8044T-8R Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740P-TR Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung