Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

SUPER

SUPERSERVER

2026GT-TRF

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: November 3, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 2026GT-TRF.

Installation and maintenance should be performed by experienced technicians only.

The 2026GT-TRF is based on the SC218G-R1800B 2U rackmount server chassis

and the Super X8DTG-QF+ serverboard. Please refer to our web site for an up-to-

date list of supported operating systems, processors and memory. See Chapter 1

for a list of differences between the server models.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the serv-

er system and describes the main features of the Super X8DTG-QF+ serverboard

and the SC218G-R1800B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the system into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

system.

iii

Preface

SUPERSERVER 2026GT-TRF User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTG-QF+ serverboard, including

the locations and functions of connectors, headers and jumpers. Refer to this chap-

ter when adding or removing processors or main memory and when reconﬁguring

the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC218G-R1800B 2U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the BIOS Setup Utility.

Appendix A: BIOS POST Error Codes

Appendix B: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

IPMI................................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Front Control Panel......................................................................................... 1-3

Cooling System ............................................................................................... 1-3

1-4 GPU Subsystem.............................................................................................. 1-4

1-5 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-5

Installing The Inner Rails on the Chassis....................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Standard Chassis Installation ......................................................................... 2-8

SUPERSERVER 2026GT-TRF User's Manual

vii

Table of Contents

Optional Quick Installation Method ................................................................. 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

Reset............................................................................................................... 3-2

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Power .............................................................................................................. 3-2

3-2 Control Panel Buttons ..................................................................................... 3-2

HDD................................................................................................................. 3-3

NIC1 ................................................................................................................ 3-3

NIC2 ................................................................................................................ 3-3

Overheat/Fan Fail/UID LED ............................................................................ 3-3

Power Failure .................................................................................................. 3-4

3-4 Drive Carrier LEDs.......................................................................................... 3-4

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................ 5-5

Installing an LGA1366 Processor ................................................................... 5-5

Installing a CPU Heatsink ............................................................................... 5-7

Memory Support.............................................................................................. 5-8

DIMM Module Population Conﬁguration .................................................... 5-9

5-6 Expansion Cards............................................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X8DTG-QF+ Quick Reference ...................................................................... 5-13

5-8 Connector Deﬁnitions ................................................................................... 5-14

viii

5-9 Jumper Settings ............................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-22

5-11 SATA Ports .................................................................................................... 5-23

5-12 Installing Software......................................................................................... 5-24

Supero Doctor III........................................................................................... 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Cooling ............................................................................................... 6-2

System Fan Failure......................................................................................... 6-2

5-7 System Fans ................................................................................................... 6-3

Installing the Air Shroud.................................................................................. 6-5

6-4 Drive Bay Installation/Removal ....................................................................... 6-6

6-5 Expansion Card Setup .................................................................................... 6-8

Low-Proﬁle Expansion Card Setup............................................................... 6-10

Installing Graphics (GPU) Cards....................................................................6-11

6-6 Power Supply ................................................................................................ 6-13

Power Supply Replacement.......................................................................... 6-13

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conﬁguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-1

7-2 Main Setup ...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations...................................................................... 7-4

Power Conﬁguration................................................................................... 7-5

7-4 Security Settings ........................................................................................... 7-23

7-5 Boot Conﬁguration ........................................................................................ 7-25

7-6 Exit Options................................................................................................... 7-27

Appendix A BIOS POST Error Codes

Appendix B System Speciﬁcations

SUPERSERVER 2026GT-TRF User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 2026GT-TRF is a GPU-optimized server comprised of two

main subsystems: the SC218G-R1800B 2U server chassis and the X8DTG-QF+

serverboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the system (www.supermicro.com).

• Five 8-cm chassis fans (FAN-0129L4)

• One air shroud (MCP-310-21801-0N)

• One passive 1U CPU heatsink (SNK-P0037P)

• One passive 2U CPU heatsink (SNK-P0038P)

• Riser Cards :

One RSC-R2UG-2E16 for two PCI-E x16 cards, left side

One RSC-R2UG-2E16R-X9 for two PCI-E x16 cards, right side

One RSC-R2UG-2E4E8 for two PCI-E x4 cards + one PCI-E x8 card, left side

One RSC-R2UG-E16R-X9 for one low-proﬁle PCI-E x8 card

• Four power cables for GPU cards (CBL-0333L)

• SATA Accessories

One SATA backplane (BPN-SAS-218A)

Two iPass to 4 SATA cables (CBL-0294L-02)

• One rail set (MCP-290-00053-N)

• One Super Server 2026GT-TRF User's Manual

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 2026GT-TRF User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 2026GT-TRF server is the X8DTG-QF+, a dual

processor serverboard based on the Intel 5520 chipset. Below are the main features

of the X8DTG-QF+. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X8DTG-QF+ supports two Intel Xeon processor 5600/5500 series. Please

refer to the serverboard description pages on our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X8DTG-QF+ has six DIMM slots that can support up to 96 GB of registered

ECC or or up to 48 GB of unbuffered ECC/non-ECC DDR3-1333/1066/800 SDRAM.

Modules of the same size and speed are recommended. See Chapter 5 for details.

Serial ATA

A SATA controller is integrated into the South Bridge (ICHR10R) section of the

chipset to provide a six-port 3/Gbs SATA subsystem, which is RAID 0, 1, 5 and 10

supported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X8DTG-QF+ has four PCI-Express 2.0 x16 slots to support four GPU cards. In

addition, there are two PCI-Express 2.0 x4 slots and two PCI-Express 2.0 x8 (one

is low-proﬁle) slots, which require the use of riser cards to support expansion cards.

Onboard Controllers/Ports

The color-coded I/O ports include one COM port (an additional COM header is

located on the serverboard), a VGA (monitor) port, two USB 2.0 ports, two Gb

Ethernet ports and one dedicated IPMI LAN port.

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-

ﬁcation that provides remote access, monitoring and administration for Supermicro

server platforms. IPMI allows server administrators to view a server’s hardware

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 620C-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-MHN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220TP-HC8TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-M4 Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 1028R-WTR Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8016B-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-610P-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Supermicro

Supermicro A+ AS-1113S-WN10RT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5014C-MF 5014C-MF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039C-I Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro FatTwin F627G2-FT+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5015P-8R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028D-TN4T Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116EL1 Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer SSG-6019P-ACR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 6048R-TXR Bedienungsanleitung

Supermicro

Supermicro SC504-203B Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-M2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015TC-10G Bedienungsanleitung

Supermicro

Supermicro 1028-WTNR(T) Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung