Supermicro SUPERSERVER 5028D-TN4T Bedienungsanleitung

USER’S MANUAL

Revision 1.0a

SUPERSERVER®

5028D-TN4T

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: August 06, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 5028D-TN4T Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

Input/Output Ports........................................................................................... 1-2

1-3 Server Chassis Features ............................................................................... 1-4

System Power................................................................................................. 1-4

Drives .............................................................................................................. 1-4

PCI Slots ......................................................................................................... 1-4

Control Panel .................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 System Interface

2-1 Overview ........................................................................................................ 2-1

2-2 Control Panel Buttons ..................................................................................... 2-2

2-3 Control Panel LEDs ........................................................................................ 2-2

Overheating..................................................................................................... 2-3

Overheat Temperature Setting ................................................................... 2-3

Responses.................................................................................................. 2-3

Chapter 3 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 3-1

Warning Denition........................................................................................... 3-1

Installation Instructions.................................................................................... 3-4

Circuit Breaker ................................................................................................ 3-5

Power Disconnection Warning ........................................................................ 3-6

Equipment Installation..................................................................................... 3-8

Restricted Area................................................................................................ 3-9

Battery Handling............................................................................................ 3-10

Redundant Power Supplies (if applicable to your system)........................... 3-12

Backplane Voltage (if applicable to your system)......................................... 3-13

Comply with Local and National Electrical Codes........................................ 3-14

Product Disposal........................................................................................... 3-15

Hot Swap Fan Warning (if applicable to your system) ................................. 3-16

Power Cable and AC Adapter ...................................................................... 3-18

Preface

Chapter 4 Advanced Motherboard Setup

4-1 Handling the Motherboard .............................................................................. 4-1

Precautions ..................................................................................................... 4-1

Unpacking ....................................................................................................... 4-1

4-2 Connecting Cables.......................................................................................... 4-2

Connecting Data Cables ................................................................................. 4-2

Connecting Power Cables .............................................................................. 4-2

Connecting the Control Panel......................................................................... 4-2

4-3 I/O Ports.......................................................................................................... 4-3

4-4 Memory Support.............................................................................................. 4-4

Memory Population Guidelines ....................................................................... 4-4

Memory Installation Guidelines ...................................................................... 4-5

Installing DIMM Memory Modules................................................................... 4-5

4-5 Expansion Cards............................................................................................. 4-5

4-6 Motherboard Details........................................................................................ 4-6

X10SDV-TLN4F Motherboard Quick Reference ............................................. 4-7

4-7 Connector Denitions ..................................................................................... 4-9

Power Connectors........................................................................................... 4-9

4-8 Jumper Settings ............................................................................................ 4-16

4-9 Onboard Indicators........................................................................................ 4-20

4-10 SATA Ports .................................................................................................... 4-21

4-11 Installing Software......................................................................................... 4-22

SuperDoctor®5 ............................................................................................. 4-23

4-12 Serverboard Battery...................................................................................... 4-24

Chapter 5 Advanced Chassis Setup and Maintenance ........................5-1

5-1 Removing Power from the System ................................................................. 5-2

5-2 Hardware Security ......................................................................................... 5-2

Front Bezel Lock............................................................................................. 5-2

Rear Chassis Hasp ......................................................................................... 5-3

Kensington Cable Slot (K-Slot) ....................................................................... 5-3

5-3 Removing the Chassis Cover ......................................................................... 5-4

5-4 Removing and Installing Drives ...................................................................... 5-5

Front Mounted Hot-Swap Drives..................................................................... 5-5

Installing the Internal Fixed Hard Drives......................................................... 5-8

Installing the Side Mounted Fixed Hard Drive................................................ 5-9

5-5 Installing the DVD Drive................................................................................ 5-10

5-6 Installing Expansion Cards ........................................................................... 5-12

5-7 Installing the Rear Exhaust Fan ................................................................... 5-14

SUPERSERVER 5028D-TN4T Manual

5-8 Replacing the Power Supply ....................................................................... 5-15

5-9 Replacing the Backplane ............................................................................. 5-16

Chapter 6 BIOS

6-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

6-2 Main Setup...................................................................................................... 7-2

6-3 Advanced Setup Congurations...................................................................... 7-4

6-4 Event Logs .................................................................................................... 7-25

6-5 IPMI............................................................................................................... 7-27

6-6 Security Settings ........................................................................................... 7-30

6-7 Boot Settings................................................................................................. 7-33

6-8 Save & Exit ................................................................................................... 7-35

Appendix A System Specications ....................................................... A-1

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

SUPERSERVER 5028D-TN4T Manual

Notes

Chapter 1

Introduction

The Supermicro SuperServer 5028D-TN4T, based on the Intel Xeon processor

D-1540 (8-Core) System-on-Chip, is well-suited for a network security appliance, a

high performance NAS server, with a space-efcient, compact design. Applications

include cloud and virtualization, corporate-WINS, DNS, and business critical

applications.

1-1 Overview

The 5028D-TN4T is a compact, low-power server comprised of two main

subsystems: the SC721TQ-250B mini-tower chassis and the X10SDV-TLN4F single

processor motherboard. Refer to the Supermicro web site for operating systems

that have been certied (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components are

listed below:

• One SAS/SATA backplane (CSE-SAS-733TQ-O-P)

• Cooling: One 12-cm fan (FAN-0124L4)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5028D-TN4T User's Manual

1-2 Motherboard Features

The SuperServer 5028D-TN4T is built around the X10SDV-TLN4F, a single

processor motherboard designed to provide maximum performance. Below are the

main features. (see Figure 1-1 for a block diagram)

Processors

The motherboard supports a single Intel Xeon D SoC D-1540 eight Core 45W

embedded processor. (SoC = System on a Chip)

Memory

The motherboard has four DDR4 DIMM slots that can support up to 128 GB of

RDIMM or 64GB UDIMM memory. It supports 2133 MHz memory modules.

Serial ATA

The motherboard supports up to six SATA3 (6Gbps) hard drives or SSDs.

Input/Output Ports

The system features two GbE and two 10G Base-T LAN ports, a dedicated IPMI

LAN port, two USB 3.0 ports (rear panel) and two 2x USB 2.0 ports (front panel),

and a VGA port.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-511E-WR Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-310T-4C2 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 540A-TR Bedienungsanleitung

Supermicro

Supermicro 2027R-E1R24L Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro 8028B-TR4F Bedienungsanleitung

Supermicro

Supermicro AS-2114S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-4MU32JBF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025C-UR Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer SSG-6019P-ACR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029AP-TN2 Bedienungsanleitung

Supermicro

Supermicro A+ AS-2013S-C0R Bedienungsanleitung

Supermicro

Supermicro FatTwin F617H6-FTL+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-T Series Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015TC-10G Bedienungsanleitung

Supermicro

Supermicro SBA-7222G-T2 Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer 1029P-NES32R Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1115S-FWTRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung