Swisher Z-max ZT2760 Bedienungsanleitung

27 HP- 60" CUT

CELEBRATINGOVER60YEARSOFINNOVATION

1945-2008

I1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093

PHONE 660-747-8183 FAX 660-747-8650

Manufacturing quality lawn care equipment since 1945

Made In The |

USA

14700

Rev. 08-016

OWNER'S MANUAL

STARTING SERIAL # TN108-01601

LIMITED WARRANTY

The manufacturer's warranty to the original consumer purchaser is: This product is free

from defects in materials and workmanship for a period of two (2) years from the date of

purchase by the original consumer purchaser. We will repair or replace, at our discretion,

parts found to be defective due to materials or workmanship. This warranty is subject to

the following limitations and exclusions:

1) Engine Warranty All engines utilized on our products have a separate warranty

extended to them by the individual engine manufacturer. Any

engine service difficulty is the responsibility of the engine

manufacturer and in no way is Swisher Mower Co., Inc. or its

agents responsible for the engine warranty. The Briggs &

Stratton Engine Service Hot-Line is 1-800-233-3723. The

Tecumseh Engine Service Hot-Line is 1-800-558-5402.

2) Commercial Use

3) Limitation

This product is not intended for commercial use and

carries no commercial warranty.

This warranty applies only to products which have been

properly assembled, adjusted, and operated in accordance

with the instructions contained within this manual. This

warranty does not apply to any product of Swisher Mower

Co., Inc., that has been subject to alteration, misuse,abuse,

improper assembly or installation, shipping damage, or to

normal wear of the product.

4) Exclusions Excluded from this warranty are normal wear, normal

adjustments, and normal maintenance.

In the event you have a claim under this warranty, you must return the product to an

authorized service dealer. All transportation charges, damage, or loss incurred during

transportation of parts submitted for replacement or repair under this warranty shall be

borne by the purchaser. Should you have any questions concerning this warranty, please

purchase, and the name of the authorized Swisher dealer from whom you purchased the

mower will be needed before any warranty claim can be processed.

THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL

DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME

PERIODS STATED HEREIN FOR ALL EXPRESSED WARRANTIES. Some states do not

allow the limitation of consequential damages or limitations on how long an implied

warranty may last, so the above limitations or exclusions may not apply to you. This

warranty gives you specific legal rights and you may have other rights, which vary from

state-to-state. This is a limited warranty as defined by the Magnuson-Moss Act of 1975.

INTRODUCTION

Congratulations

Thank you for purchasing a Swisher Zero Turn mower. This machine is built for the

greatest efficiency and rapid mowing of large areas. Conveniently located controls and

dual commercial grade hydrostatic transmissions regulated by steering levers, contribute to

the machine's performance.

This manual is a valuable document. Following the instructions for use, service,

maintenance, etc. can greatly increase the life-span of your machine.

General

In this operator's manual, left and right, backward and forward are used in relation to the

normal operators position. NOTE:

Read Before Operating If you have never used a Zero Turn mower before, refer

to the Operation Controls section of this manual before

attempting to operate one for the first time.

This machine is constructed only for mowing grass on lawns and other free and even

ground without obstacles. This machine is not intended for commercial use. The

manufacturer's directions concerning operation, maintenance, and repairs must be

carefully followed.

This machine must only be operated, maintained, and repaired by persons that are

familiar with the machine's special characteristics and who are well versed in safety

instructions.

Accident prevention regulations, other general safety regulations, occupational safety

rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer

from liability for any resulting personal injury or property damage.

Read engine manufacturer's

operating and maintenance

instructions.

Read and observe all safety

instructions on your mower and in the

manual.

Check engine oil.

Check fuel caps to sure that they

are in place.

Know how to set the parking brake.

Be sure mower blades are turned off-

PTO switch pushed down.

Know how to stop the engine - Turn key

to off

Know how to stop the unit - Return

control handles to neutral

INTRODUCTION

Uncrating & Assembly

TOOLS REQUIRED:

,/ 2 - ½" Wrenches or ½" Socket with drive ratchet

,/ Tire pressure gauge

,/ Nail bar or claw hammer

,/ Wire snips

To Remove The Mower From The Crate:

Dispose of top and side panels of the crate.

Remove loose parts and packing material.

Cut any banding or strapping that may be holding the mower to the crate.

Disengage spark plug wire and place where it cannot make a connection.

Raise the mower deck to its highest position.

Install steering levers. Remove the bolts from the control arms on the mower. Align

the holes in the lever with the holes in the control arms and attach with the bolts provided.

Make sure both bolts on both handles are tight.

Disengage the parking brake by pushing the handles to their fully extended position.

Open the transmission valves at the rear of the unit by pulling the release rods and

locking them in place. SEE INSTRUCTION DECAL AT THE REAR OF THE UNIT.

Carefully push the mower off the crate to a safe and level area.

Check engine oil. All engines are filled with oil and tested at the factory. Verify oil

level and add if necessary before starting engine. SEE ENGINE OWNER'S MANUAL

Check the battery. If the battery is put into service after the "month & year" of the

date on the battery, then it may need to be charged with a 12 volt charger for a minimum

of 1 hour, but no more than 2 hours at a rate of 6 to 10 amps.

Attach battery cables to battery. Always attach the positive terminal first.

Close the transmission valves at the rear of the unit. SEE INSTRUCTION DECAL

AT THE REAR OF THE UNIT.

Reconnect spark plug wire.

Check tire pressure on all four wheels. REFER TO UNIT SPECIFICATIONS TABLE

SYMBOLS & DECALS

OD45- Warning Decal

Swisher Flag U.S.A.- OD39 Notice Do Not Alter Wiring Decal- OD74

Flying Debris Decal - OD43 Operator Must Be Seated Decal- OD73

Triangle Danger Decal - OD55

Key/PTO Decal- 10273

Throttle/Choke Decal -10271

N( Step Decal - OD 11

TOFREE-WHEEL:

PULLRODSOUTON

EACH_OE_D LOCi{

lift0 POSrRON,

REL_ TOO_RATE

MACNINENOR_LL¥_

Hydro Release-

10280

Danger/Warning Decal- 10276

General Use

SAFETY INSTRUCTIONS

These instructions are for your safety. Read them carefully.

This Safety Alert Symbol indicates important messages in this manual. When

you see this symbol, carefully read the message that follows and be alert to the

possibility of personal injury.

;* Read all instructions in this operator's manual and on the

machine before starting it. Ensure that you understand them and

then abide by them.

_Learn how to use the machine and its controls safely and learn

how to stop quickly. Also learn to recognize the safety decals.

:_ Only allow the machine to be used by adults who are familiar

with its use.

Make sure nobody else is in the area of the machine when you

start the engine, engage the drive, or run the machine.

_Stop the machine if someone enters the work area.

_Clear the area of objects such as stones, toys, steel wire, etc.

that may become caught in the blades and thrown out.

_Do Not Use this machine without the Discharge

Chute in place.

;* Stop the engine and disconnect the spark plug before cleaning

the discharge deck.

Never take passengers. The machine is only intended for use

by one person.

Always look around before and during reversing maneuvers.

;* Slow down before turning.

Shut down the mower deck when not mowing.

Be careful when rounding fixed objects, so that the blades do

not hit them.

Only operate the machine in daylight or other well-lit

conditions.

;* Keep the machine a safe distance from holes or other

irregularities in the ground.

Never use the machine if you are tired, if you have consumed

alcohol, or if you are taking other drugs or medications that can

affect your vision, judgment, or coordination.

;* Beware of traffic when working near or crossing a road.

Never leave the machine unsupervised with the engine running.

Always shut down the blades, engage the parking brake, stop the

engine, and remove the ignition key before leaving the machine.

Never allow children or other persons not trained in the use of

the machine to use or service it. Local laws may regulate the age

of the user.

Make sure that you have first aid equipment close at hand

when using the machine.

Never use the machine when barefoot. Always wear protective

shoes or boots.

NOTE:

If you have never used a Zero Turn

mower before, refer to the Operation

Controls section of this manual before

attempting to operate one for the first

time.

SAFETY INSTRUCTIONS

General Use Continued...

;* Always wear approved protective glasses or a full visor when

assembling or driving.

Ear Protection is recommended

;* Never wear loose clothing that can get caught in moving parts.

Children

Remember

The operator is responsible for

avoiding dangers or accidents.

>. Serious accidents may occur if you fail to be on guard for children in

the area of the machine. Children are often attracted to the machine and

mowing work. Never assume that children will stay put where you last saw

them.

>. Keep children away from the mowing area and under close supervision

by another adult.

Shut off the machine if children enter the work area.

Never allow a child to ride with you.

Never allow children to operate the machine.

>. Be extra cautious near corners, bushes, trees, or other objects that

block your view.

Slope Operation

;* Remove obstacles such as stones, tree branches, etc.

Mow up and down, not side to side. Never drive the rider on terrain that slopes

more than 10 degrees.

;* Avoid starting or stopping on a slope. If the tires begin to slip, shut down the

blades and drive slowly down the slope.

Always drive evenly and slowly on slopes.

;* Make no sudden changes in speed or direction.

Avoid unnecessary turns on slopes, and if it proves necessary, turn slowly and

gradually downward, if possible.

;* Watch for holes, ruts, or bumps. On uneven terrain, the machine can tip more

easily. Long grass can hide obstacles.

Drive slowly and use small movements of the steering controls.

;* Do not mow wet grass. It is slippery, and the tires can loose their grip, so that

the machine slides.

_I, WARNING

When using the machine,

approved personal

protective equipment shall

be used. Personal

protective equipment

cannot eliminate the risk of

injury, but it will reduce the

degree of injury if an

accident does occur. Ask

your retailer for help in

choosing the right

equipment.

Remember

The operator is responsible

for avoiding dangers or

accidents.

Do not try to stabilize the machine by putting a foot on the ground.

MOWING SAFETY

•WARNING - Petrol is highly flammable.

- store fuel in containers specifically designed for this purpose;

- refuel outdoors only and do not smoke while refueling;

- add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine

is running or when the engine is hot.

- if petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and

avoid creating any source of ignition until petrol vapors have dissipated;

- replace all fuel tanks and container caps securely.

•Replace faulty silencers;

•before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn

or damaged. Replace worn or damaged blades and bolts in sets to preserve balance;

•on multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

MAINTENANCE AND STORAGE

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition;

•never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or

spark;

•allow the engine to cool before storing in any enclosure;

•to reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass,

leaves, or excessive grease;

•check the grass catcher frequently for wear or deterioration;

•replace worn or damaged parts for safety;

•if the fuel tank has to be drained, this should be done outdoors.

•when machine is to be parked, stored or left unattended, lower the cutting means unless a positive mechanical

lock is used.

TRAINING

All drivers should seek and obtain professional and practical instruction. Such instruction should emphasize:

•the need for care and concentration when working with ride-on machines;

•control of a ride-on machine sliding on a slope will not be regained by the application of the brake. The main

reason for loss of control are:

i) insufficient wheel grip;

ii) being driven too fast;

iii) inadequate braking;

iv) the type of machine is unsuitable for its task;

v) lack of awareness of the effect of ground conditions, especially slopes;

vi) incorrect hitching and load distribution.

OPERATION

•Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect;

•when using any attachments, never direct discharge of material toward bystanders nor allow anyone

near the machine while in operation;

•never operate the machine with defective guards, or without safety protective devices in place;

•do not change the engine governor settings or over speed the engine. Operating the engine at excessive

speed can increase the hazard of personal injury;

•disengage drive to attachments, stop the engine, and disconnect the spark plug wire(s) or remove the

ignition key:

- before clearing blockages or unclogging chute;

- before checking, clearing or working on the machine;

- after striking a foreign object. Inspect the machine for damage and make repairs before restarting and

operating the equipment;

- if the machine starts to vibrate abnormally (check immediately);

•stop the engine and disengage drive to attachment:

- before refueling;

- before removing the grass catcher;

- before making height adjustment unless adjustment can be made from the operator's position

CUSTOMER RESPONSIBILITIES

Operator Presence System

Be sure the operator presence and interlock systems are working properly. If your mower does not function as

described, repair the problem immediately.

;* The engine should not start unless the parking brake is engaged and the PTO (Blade Engagement

- See OPERATION FEATURES section of this manual) switch is disengaged (pressed down).

When the engine is running, the operator should never leave the seat without first setting the parking

brake and shutting off the engine.

When the engine is running and the PTO switch is engaged, any attempt by the operator to leave

the seat without first disengaging the PTO switch, should shut off the engine.

When the engine is running and the control levers are rotated in, the operator should never attempt

to leave the seat without rotating the control levers out, shutting off the engine and engaging the

parking brake.

_The PTO switch should never engage without the operator on the seat.

Tires

Maintain proper air pressure in all tires ( SEE SPECIFICATIONS section)

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

Blade Maintenance

CAUTION

Stop engine and remove ignition key for safety. Disconnect spark plug wire. Wear heavy, thick gloves when

holding onto blade. Avoid the sharp edge of the blade.

For best results, mower blades must be kept sharp. Replace bent or damage blades.

Battery

Safely raise front of mower. SEE WARNING

Hold or block blade from turning.

Loosen blade nut and remove blade.

Replace blade, (SEE SPECIFICATIONS).

,_ WARNING

When it is necessary to raise the mower for

any repair or service, use jackstands to

provide adequate support. DO NOT rely on

hydraulic or mechanical jacks

To clean battery and terminals

Remove terminal guard.

_Disconnect the BLACK battery cable first, then the RED battery cable and remove the battery.

Rinse the battery with plain water and dry.

Clean terminals and battery cable ends with wire brush until shiny.

Coat terminals with grease or petroleum jelly

Reinstall battery

,_ WARNING

The battery contains sulfuric acid and

electrolytes which are poisonous and

corrosive.

Reconnect the battery cables

Inhaltsverzeichnis

Andere Swisher Rasenmäher Handbücher

Swisher

Swisher POSTMASTER PST67522 Bedienungsanleitung

Swisher

Swisher Z-MAX ZT2560 Bedienungsanleitung

Swisher

Swisher FC18560BS Bedienungsanleitung

Swisher

Swisher POL10544HD Bedienungsanleitung

Swisher

Swisher ZT18542 Betriebsanleitung

Swisher

Swisher ST50022STDQ Bedienungsanleitung

Swisher

Swisher Response Commercial Pro ZTR2766CP Bedienungsanleitung

Swisher

Swisher WB942 Bedienungsanleitung

Swisher

Swisher WB11524BSXP Bedienungsanleitung

Swisher

Swisher FT1150 Bedienungsanleitung

Swisher

Swisher The Predator WB11524 Bedienungsanleitung

Swisher

Swisher TWR10532BS Bedienungsanleitung

Swisher

Swisher ZT2454K Bedienungsanleitung

Swisher

Swisher ZT2452A-CA Bedienungsanleitung

Swisher

Swisher Commercial Pro Response Z21554CPHO Bedienungsanleitung

Swisher

Swisher Predator WB80024 Bedienungsanleitung

Swisher

Swisher Z Series Bedienungsanleitung

Swisher

Swisher T11044, T11544, T10544BSPB, T1 Bedienungsanleitung

Swisher

Swisher POL10544C Bedienungsanleitung

Swisher

Swisher ZT2760 BP Bedienungsanleitung

Swisher

Swisher Trim-Max STD4422HO Bedienungsanleitung

Swisher

Swisher FC14560CL Gebrauchs- und Pflegehandbuch

Swisher

Swisher PST5022 Bedienungsanleitung

Swisher

Swisher T1360B1 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung