TBS technologies TBS5301 Bedienungsanleitung

TBS5301 Capture Card User Guide

TBS5301 USB2.0 HDMI HD Video capture card with HDMI 1.4 port, completely support full HD

Video and Audio capture and playback. Compact in size and equipped with a USB 2.0 port, the

device is a practical and easy-to-use USB 2.0 capture solution. It provides HDMI input of highest

quality, d meets the HDMI 1.4 standard, satisfies the 1080 50/60p resolutions and H.264

hardware compression, you can easily capture and encode signals from different kinds of device

without limitation. With the LAN port, TBS5301 allows you to stream the signals out directly

without PC, that makes it a device portable and easy to use with or without PC.

Windows platform:

1. Driver install:

1> Connect this capture card to your computer or laptop by USB cable, and power adapter. USB

should be connected to port 2.0, and power adapter is DC 12V, 2A.

2> When device is connected, your computer will detect a new device under:

Computer--Properties--Device Manager.

Check device ID to make sure your capture card is correctly installed:

3>Download driver from our official website and install driver:

Driver link:

Click this executable file “TBS_5301_setup” to start driver installation, wait for a few seconds

until it reminds you install finish:

4>Go to “Device Manager”, check whether driver is ready or not. If you can see as below,

A device “TBS5301 USB HDMI Capture”appears under “Sound, video and game controllers”, that

means driver has been installed successfully, you can use it now:

2.The Usage

This device has USB and Ethernet interface, Media will be transferred by USB port or Ethernet

port, and the USB port is always the preferred.

If you choose Ethernet, please remove USB cable and restart device again (power off/on).

In this case, the way to get IP is DHCP.

Transfer media by USB:

1>This capture card is compatible with those DVB software, like DVBdream, DVBviewer, progDVB,

and etc. in Windows system.

2>Encoding setting:

The capture card encoding type is hardware compression, that means it will not cost you any CPU

resource. Please set a proper encoding parameter first. We have 3 modes for you: Auto, Manual,

Advanced.

Auto mode: The output resolution, code rate and frame rate will be identical to the input.

Manual mode: Super, Ultral, Excellent, Good, Fair, Poor, Mobile. A level is corresponding to a

resolution and a code rate.

Advanced mode: You can define the encoding parameter yourself.

3>Here’s the setting tool:

Select a format, click “Apply” to effect your setting.

For the audio input, you can choose HDMI in or Line in. When selected to HDMI, both video and

audio will be transferred by HDMI. If selected to Line in, video is transferred by HDMI, and audio

comes from “AL”and “AR”port.

4>Install software. Now, we’ll take DVBdream as an example to explain you how it works.

4.1>Download DVBdream and install:

https://www.tbsiptv.com/download/common/dvbdream_oem_version_setup_v2934.zip

4.2>Scan:

Connect your media source to this capture card by a HDMI cable. The source can be a set box, a

DVD player, or a Cameral, and ect.

DVBdream version 2.9.3.4. supports auto scan, so just operate “Channels--Manual scan", it will

go to scan automatically.

Now, you can enjoy your channel.

5>Streaming.

If you want to record the media to your local, just go to setting tool “Recording” option:

Set a path for file storage; select a limit option, and click “Start” last, It will start to record.

Limit option, we have “no limit”, “file size limit” and “time limit”.

6>Streaming.

Our setting tool also support streaming in windows. If you want to do a streaming, just go to

setting tool “Streaming” option:

Network Protocol: UDP or RTP

Unicast/Multicast: where you want to stream to.

Port: streaming port

Start/Stop: start or stop “streaming”.

Transfer by Enthernet:

In this case, just need to connect a LAN to this capture card. Please do not connect USB cable, if

USB have already connected, please remove it and restart your capture card (power off/on).

Setting tool is another one named TBSNetConfigurationTool.

1>“HDMI” option is for output setting,3 modes “Auto”, “Manual” and “Advanced”:

2>“Network” option is for setting capture card IP and some streaming settings.

Suboption “streaming” for setting udp/rtp protocol, unicast/multicast, ts port.

“Open ts”----Apply to start your streaming;“Close ts”----Apply to stop your streaming.

Suboption “IP setting” for capture card IP setting:

192.168.8.60 is device IP;

8888 is Server port. This port is for communicating purpose, it’s different from ts port.

Linux platform:

This capture card also supports Linux platform, Linux driver is ready. Linux OS, we recommend

you these command system like Ubuntu or centos, or Debain.

And for software, it’s compatible with those DVB streaming software. For example, DVBlast,

Tvheadend, Astra cesbo, mumudvb, and ect.

Just take it as a DVBS/S2 tuner card, and also all of your configuration must follow DVBS/S2

standard, parameters include “Frequency”, “Polarization”, “Symbol rate”, “Modulation”, not one

less.

Now, we’ll explain you how it works in a Linux platform.

1.Install your capture card to your Linux server.

2.Run this command to check whether device is detected by your Serevr or not:

$ lsusb or $ lsusb | grep 5301

3.Install Linux driver. The driver has been uploaded to our official open source driver website:

https://github.com/tbsdtv/Linux_media/wiki

Install steps:

Downloading source and building:

git clone https://github.com/tbsdtv/media_build.git

git clone --depth=1 https://github.com/tbsdtv/Linux_media.git -b latest ./media

cd media_build

make dir DIR=../media

make allyesconfig

make -j4

sudo make install

sudo reboot

Firmware install:

$ wget http://www.tbsdtv.com/download/document/Linux/tbs-tuner-firmwares_v1.0.tar.bz2

# sudo tar jxvf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/

If any error happens during your compiling, please check and fix the error first, then go to

execute “make install”.

We have listed some common errors, please check the part FAQ to get the solution from the

website “https://github.com/tbsdtv/Linux_media/wiki”.

After the driver is successfully installed, please reboot your Server to load new driver, and then

check adapter is loaded or not.

If you can find adapter under directory “/dev/dvb”, that means driver is ready, you can use now.

Or check frontend status. Like this:

4. Streaming.

4.1>Before you doing a steaming, you need to configure encoding parameter first. We have GUI

tool and command line for you.

Download them from our website and then give the executable file a permission first . Like this:

The GUI tool: “TBSLocalConfigurationTool” also supports recording, streaming, the configuration

is same as the windows, please refer to windows user guide.

Command line:

In some case, your Linux system runs a Server version, can not use GUI tool. We also have tool

“command line”for you to configure capture card.

The command line package you can download from our official website. Unpack the zip package

and go to the new directory. The executable file is needed to be give a permission first.

Tool TBSLocalConfigurationTool(Transfer by USB port):

# chmod +x TBSLocalConfigurationTool

Now you can run this command to get more information how to use “TBSLocalConfigurationTool

“. Like this:

$ TBSLocalConfigurationTool

Here’s more detailed explanation and example of usage:

1> Auto mode: -A (the same with input format)

2> Manual:-M (1--7,1:super 1920*1080,2:ultra 1440*1080,3:excellent 1280*720,4:good

1120*640,5:fair 960*540,6:poor 800*480,7:mobile 480*272)

3> Advance: -p:profile (0:high,1:Main);

-l : level (30/31/32/40/41/42) -H(size)

-V: (size) (1920*1080--480*272)

-B: bitRate (350--18000K)

-F : frameRate : (24--60)

Examples:

# ./TBSLocalConfigurationTool -i -N // check input video format and mac address

#./TBSLocalConfigurationTool -c //check the latest configuration of the output format

#./TBSLocalConfigurationTool -r // the device of mcu reset

#./TBSLocalConfigurationTool -x 1 //set output mute when audio and video are out of sync, it can

Andere TBS technologies PCI-Karte Handbücher

TBS technologies

TBS technologies TBS6304 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung