TE Connectivity D369 Series Bedienungsanleitung

1 of 3

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

PRODUCT INFORMATION

1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

Instruction Sheet

408-32194

09 MAR 16 Rev A

For an overview of D369 series connectors, view our video at www.te.com.

For receptacle part numbers, refer to the customer drawings given in Figure 1.

Figure 1

NOTE

Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.

1. ASSEMBLY

1. Crimp the contacts following the guidelines given in SAE AS39029, “General Specification for

Contacts and Electrical Connectors”, then insert the contacts into the receptacle contact cavities.

2. Refer to Figure 2 and ensure that the panel gasket is compatible with the receptacle size and panel

thickness. The number of panel gasket identifiers corresponds to the panel thickness. If it is not

compatible:

a. From the mating face of the receptacle, pull the panel gasket from the receptacle.

b. Choose the appropriate panel gasket. Refer to Figure 2.

c. With the back (side without pads) of the panel gasket facing the mating face of the receptacle,

align the panel gasket identifiers with the receptacle panel latch (on top or bottom), then slide the

panel gasket onto the receptacle and hook the back over the receptacle flange. See Figure 2.

RECEPTACLE SIZE

PANEL THICKNESS (mm [in.]) ±0.10 [±.004]

1.27 [.05]

1.60 [.06]

2.03 [.08]

PANEL GASKET 612154-(Suffix Number) Number of Receptacle Panel Gasket Identifiers

3-A

3-B

3-C

6-A

6-B

6-C

9-A

9-B

9-C

Figure 2

D369 Series Panel-Mount

Receptacle Connectors

Size 3 Receptacle

D612015-3-ENV

Size 6 Receptacle

D612015-6-ENV

Size 9 Receptacle

D612015-9-ENV

Mating Face

of Receptacle

Panel Gasket

Pad (4 Places)

Panel Gasket

Identifiers (2 Shown)

Receptacle Panel

Latch (Top Shown)

Panel Gasket Installed on Receptacle

Panel Gasket Identifiers

Aligned with Top

Panel Gasket Identifiers

Aligned with Bottom

Receptacle

Flange

Mating Latch (Ref)

408-32194

Rev A

2 of 3

3. Prepare the panel with a cutout meeting the dimensions given in Figure 3.

PANEL THICKNESS (mm [in.]) ±0.10 [±.004]

RECEPTACLE

SIZE

PANEL CUTOUT DIMENSION (mm [in.])

Number of Receptacle Panel Gasket Identifiers

A (Width)

B (Height)

±0.03 [±.001]

MINIMUM PITCH (Centerline)

C (Vertical)

D (Horizontal)

1.27 [.05]

1.60 [.06]

2.03 [.08]

10.85±0.08

[.42±.003]

8.95 [.3523]

12.8 [.503]

14.3 [.562]

11.49 [.4523]

15.34 [.604]

14.03 [.5523]

17.88 [.704]

Figure 3

4. From the back of the panel, align the receptacle mating face with the cutout so that the mating latch

faces the bottom of the panel cutout, then insert the receptacle into the cutout until the panel latches

snap into the panel cutout. Ensure that all panel gasket pads are against the panel. See Figure 4.

NOTE

In order for the release button of the plug to face the top of the panel cutout, the receptacle mating latch must face the bottom

of the panel cutout when the receptacle is mounted to the panel.

Figure 4

5. With the mating face of the plug facing the mating face of the receptacle, align the orientation keys

with the receptacle orientation keyways, and push the plug onto the receptacle until it stops. See

Figure 4.

Back of Panel

Panel Gasket Pads

(4 Places) Against Panel

Mating Face

of Receptacle

Receptacle

Mating Latch

Mating Face

of Plug

Bottom of Panel Cutout

Plug Release Button

Facing Top of Panel Cutout

Note: For clarity, wires

are not shown.

Top of Panel Cutout

Orientation

Keyway

R 0.60 mm [.023 in.] Max

Note: Not to Scale

408-32194

Rev A

3 of 3

2. DISASSEMBLY

1. Push the release button of the plug, then pull the plug straight from the receptacle.

2. From the front of the panel, align the opening of removal tool (refer to drawing D612184-ENV for part

numbers) with the mating face of the receptacle according to the orientation markings on the side of

the tool (arrows pointing toward front of panel), and slide it over the receptacle until it bottoms on the

panel. See Figure 5.

3. Press on the mating face of the receptacle until the receptacle is free from the panel.

Figure 5

4. To remove the contacts from the receptacle, use insertion/extraction tool M81969/14-01 (or

equivalent) following the guidelines given in SAE AS39029.

3. REPLACEMENT AND REPAIR

Do not use defective or damaged product.

The panel gasket can be replaced. Refer to step 2 of Section 1 for part numbers. To order replacement parts,

call 1-800-522-6752, or fax your purchase order to 717-986-7605, or write to:

CUSTOMER SERVICE (038-035)

TYCO ELECTRONICS CORPORATION

PO BOX 3608

HARRISBURG, PA 17105-3608

4. REVISION SUMMARY

Initial release of instruction sheet

Opening of

Removal Tool

Front of Panel

Mating Face

of Receptacle

Orientation Markings on

Side of Removal Tool

Removal Tool

Bottomed on Panel

Press on

Receptacle

Mating Face

Dieses Handbuch passt für folgende Modelle

Andere TE Connectivity Kabel und Steckverbinder Handbücher

TE Connectivity

TE Connectivity CCS1 Bedienungsanleitung

TE Connectivity

TE Connectivity AMP-HDI Bedienungsanleitung

TE Connectivity

TE Connectivity HV-CP Bedienungsanleitung

TE Connectivity

TE Connectivity Miniature AMP-IN Benutzerhandbuch

TE Connectivity

TE Connectivity HVA630-5p Bedienungsanleitung

TE Connectivity

TE Connectivity MATE-N-LOK 2 794216-1 Bedienungsanleitung

TE Connectivity

TE Connectivity HVA630-2phm Bedienungsanleitung

TE Connectivity

TE Connectivity HVA630-5p Bedienungsanleitung

TE Connectivity

TE Connectivity AMPOWER 68361-1 Bedienungsanleitung

TE Connectivity

TE Connectivity SGI 1.25 Benutzerhandbuch

TE Connectivity

TE Connectivity 025/250 Bedienungsanleitung

TE Connectivity

TE Connectivity Quadrax DSub Benutzerhandbuch

TE Connectivity

TE Connectivity AMP-LATCH Benutzerhandbuch

TE Connectivity

TE Connectivity 747564-9 Bedienungsanleitung

TE Connectivity

TE Connectivity DRC16 Bedienungsanleitung

TE Connectivity

TE Connectivity RAYCHEM D-436 Series Referenzhandbuch

TE Connectivity

TE Connectivity M12 Benutzerhandbuch

TE Connectivity

TE Connectivity Raychem LJSM Series Bedienungsanleitung

TE Connectivity

TE Connectivity D5000-S Bedienungsanleitung

TE Connectivity

TE Connectivity AMP NETCONNECT 1499119-1 Bedienungsanleitung

TE Connectivity

TE Connectivity RF COAXIAL Bedienungsanleitung

TE Connectivity

TE Connectivity CEELOK FAS-T Bedienungsanleitung

TE Connectivity

TE Connectivity HVP800 2PHI 90 Bedienungsanleitung

TE Connectivity

TE Connectivity QSFP-DD Benutzerhandbuch

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung