Tecnosicurezza TechMaster T9530/GR Bedienungsanleitung

TechMaster

Installation instructions

2 of 20 II_ TechMaster_06_eng

Installation instructions

TechMaster

Table of contents

TABLE OF CONTENTS 2

MODELS AND CHARACTERISTICS 3

ACCESSORIES 3

AUDIT AND PROGRAMMING ACCESSORIES 3

CERTIFICATIONS 4

IMPORTANT NOTES! 4

KEYPAD DIMENSIONS 6

SWINGBOLT LOCK DIMENSIONS 6

DEADBOLT LOCK DIMENSIONS 7

LATCHBOLT LOCK DIMENSIONS 8

MOTORLOCK LOCK DIMENSIONS 8

MOTOR LATCHBOLT LOCK DIMENSIONS 9

FIXED KEYPAD INSTALLATION INSTRUCTIONS 9

SWINGBOLT LOCK INSTALLATION INSTRUCTIONS 10

DEADBOLT AND LATCHBOLT LOCKS INSTALLATION INSTRUCTIONS 11

MOTORLOCK AND MOTOR LATCHBOLT LOCKS INSTALLATION INSTRUCTIONS 13

CONNECTION EXAMPLES 15

FUNCTIONAL TESTS 17

CE DECLARATIONS 18

CONTACTS 20

II_TechMaster_06_eng 3 of 20

Installation instructions

TechMaster

Models and characteristics

Model

Variant

T9530/GR –Keypad in metal. Satin

chrome colour with rubber membrane foil

keypad in grey colour.

/DL with Dallas key reader.

/C with connection kit for T9355/IP interface.

Accessories

Code

Description

N620/A

9V Battery box with alarm interface.

L4001

Large battery box for 6 size C 1,5V batteries.

T6006

Power supply interface 12 ÷ 24 V with alarm

interface.

L2666

Knob with 6 mm square spindle.

N1971

User Dallas key.

T9355

I/O interface.

T9355/IP

I/O interface with TCP/IP for remote

management.

N10017/01 and /02

Open Device with led and buzzer (N10017/01)

or with led only (N10017/02).

T20019/T

Cabling interface/Adapter.

Audit and programming accessories

Code

Description

N42180/T

USB interface.

4 of 20 II_ TechMaster_06_eng

Installation instructions

TechMaster

T42146/J

Setup and audit cable.

Certifications

The updated product certifications are available on the official websites of Tecnosicurezza:

www.tecnosicurezza.it www.tecnosicurezza.es www.usatecno.com

Important notes!

Before installing this product, please read carefully the installation and operating

instructions.

Locks can be installed in all traditional safes.

Locks have to be mounted on secure storage metal (preferred steel) units only.

Locks must be protected against external attacks, for this reason it is recommended to

install them on the door away from any through holes (except DeadBolt and MotorLock).

If locks are not properly protected by systems belonging to the safe (manganese plates,

glass plate, relocking, etc.) only DeadBolt and MotorLock locks can be mounted behind

the passage hole for the connection cable or the spindle.

Any electronic part must be properly protected and not easily accessible even when the

door is open.

Locks have been developed to work correctly in a temperature range from -5 ° C to + 50

° C and in an environment with non-condensing humidity between 25% and 90%.

The mounting dimensions are standard (magic module).

For keypad and lock installation, use only the screws provided by Tecnosicurezza. Any

other screw must be approved in advance.

Locks are supplied with metric (M6) mounting screws. Upon request, Imperial 1/4-20 UNC

format mounting screws are available.

The type of material and the length of the screws must, in any case, be selected so as to

guarantee long life and reliability.

Tighten the screws so that the lock is firmly fixed to the mounting surface

(recommended torque between 2,5 and 5,5 Nm).

II_TechMaster_06_eng 5 of 20

Installation instructions

TechMaster

The mounting surface must be perfectly flat.

In order to prevent the screws from loosening, it is recommended the use of LOCTITE®

threadlocker and/or specific washers positioned under the head of the fixing screw.

The diameter of the passage hole for the connection cable or the spindle must not

exceed 11 mm.

The hole must be completely cleaned of drill dust and sharp edges.

Do not lubricate locks.

In the locked position, the distance between the bolt and the boltwork part which moves

the lock bolt must comply with the following specifications for each type of lock.

Any component to be fixed to the lock bolt must be previously approved by

Tecnosicurezza before installation. In any case, the maximum load must not exceed 4 N

for T5301/M and 30 N for the reinforced model T5301/MP.

Secure the cables away from moving parts by using cable ties and cable ties bases.

If placed in normal domestic or office environments, the locks do not require particular

maintenance; in any case, after 10,000 opening/closing cycles, it is recommended to run

a test that verifies the correct and complete operation of the product.

Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1,5

Volt Alkaline batteries. Alternatively, it is also possible to use a stabilized power supply

from 12 V to 24 V and 1 A, with relative power supply interface (p.n. T6006).

A series of acoustic signals during opening indicate a low battery level. In this case, the

battery must be replaced.

Do not use cleaning agents with chemical, abrasive or alcohol-containing additives to

clean the components. Use only a damp cloth.

Do not spray liquid directly onto the components.

6 of 20 II_ TechMaster_06_eng

Installation instructions

TechMaster

Keypad dimensions

STANDARD mounting

VERTICAL mounting

SwingBolt lock dimensions

T5301

II_TechMaster_06_eng 7 of 20

Installation instructions

TechMaster

T5300

DeadBolt lock dimensions

T5301/D

T5300/D

8 of 20 II_ TechMaster_06_eng

Installation instructions

TechMaster

LatchBolt lock dimensions

T5301/S

T5300/S

MotorLock lock dimensions

T5301/M & T5301/MP

II_TechMaster_06_eng 9 of 20

Installation instructions

TechMaster

Motor LatchBolt lock dimensions

T5301/M/S

Fixed keypad installation instructions

Insert the keypad cable inside the hole on the safe door and connect it to the lock connector

"1/ENT”. Lift the keypad membrane and, making sure that the connection cable and the

battery cable are not damaged by the keypad case, fix the screws to the relative threaded

holes on the safe door.

STANDARD mounting

VERTICAL mounting

The keypad can also be installed in a quick hooking/unhooking mode (vertical mounting).

Remove the release liner placed under the membrane

and apply the latter on the keypad case.

Connect a battery to the battery connector inside the

keypad battery compartment or, if provided, connect

the battery pack to the lock connector "2/BAT" .

10 of 20 II_ TechMaster_06_eng

Installation instructions

TechMaster

SwingBolt lock installation instructions

The SwingBolt lock is a swinging bolt lock whose block is carried out by a motor; it can be

installed in all 4 directions, even upside down.

By entering a valid code, the lock electronic removes the blocking for 3 seconds and the

boltwork can be moved into open position by pushing the bolt inside the lock case.

The bolt automatically secures when the safe handle, or the safe door mechanism, is brought

to the locked position.

If the SwingBolt lock is used in conjunction with other locks, the safe door mechanism must

ensure the closure of the SwingBolt before the other locks.

The lock can be mounted in all four mounting directions (RH, LH, VU, VD).

Furthermore, by flipping over the lock, both locking directions can be realized.

In the locked position the distance between the lock’s bolt and the lock part

that moves the lock bolt should be approximately 1 mm.

The bolt must be able to move freely without force being applied to it.

The maximum load applicable to the bolt must not exceed 1 KN. Contact Tecnosicurezza in

case of heavier loads.

Connect the keypad cable to the lock connector "1/ENT", making sure it is fully inserted and

locked.

Any alarm interface or battery holder needs to be connected to the lock connector “2/BAT”.

To remove the cable, bring the connector upwards and carefully pull it out.

It’s possible to connect a relocker to the lock cover through the appropriate holes.

Fix the relocker plate with M4 self tapping flat head screws.

Length must be 6 mm + plate thickness.

(i.e. 6 mm + 2 mm plate = 8 mm screw)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tecnosicurezza Sperren Handbücher

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse T6430 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Series Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech T52 Series Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza StraightBolt EM3520 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza T9510/BR Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Benutzerhandbuch

Tecnosicurezza

Tecnosicurezza Pulse 2 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza KL3909 Montageanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung