Teledyne Lecroy Summit Z2-16 Bedienungsanleitung

For PCI Express Protocol Suite software version 7.30

Generated: February 2, 2015, 14:26

PROTOCOL SOLUTIONS GROUP

3385 SCOTT BLVD

SANTA CLARA, CA 95054

Summit Z2-16™

PCI Express Multi-Lane Exerciser

User Manual

Summit Z2-16 Exerciser User Manual

Teledyne LeCroy

Document Disclaimer

The information in this document has been carefully checked and is believed to be

reliable. However, no responsibility can be assumed for inaccuracies that may not have

been detected.

Teledyne LeCroy reserves the right to revise the information in this document without

notice or penalty.

Trademarks and Servicemarks

Teledyne LeCroy, CATC Trace, PETracer Edge, PETracer EML, PETracer ML, PETracer,

PETrainer EML, PETrainer ML, PETracer Summit, Summit T2-16, Summit Z2-16,

Universal Protocol Analyzer System, UPAS, and BusEngine are trademarks of Teledyne

LeCroy.

Microsoft and Windows are registered trademarks of Microsoft Inc.

All other trademarks are property of their respective companies.

This document may be printed and reproduced without additional permission, but all

copies should contain this copyright notice.

WEEE Program

Summit Z2-16 Exerciser User Manual

Teledyne LeCroy iii

TABLE OF CONTENTS

Section 1. General. . . . . . . . . . . . . . . . . . . . . 1

Chapter 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Summit Z2-16 Exerciser Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Summit Z2-16 Exerciser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Other Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 2 Hardware Description . . . . . . . . . . . . . . . . . . . 7

2.1 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Host Machine Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.3 Summit Z2-16 Exerciser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.4 Summit Z2-16 Front Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Summit Z2-16 Rear Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.1 Installing the PETracer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2 Setting Up the Summit Z2-16 Exerciser using an Ethernet Connection . . 15

Connecting to a Summit Z2-16 Exerciser in the Local Network . . . . . . 15

3.3 Setting Up the Summit Z2-16 Exerciser using a USB Connection . . . . . . 18

3.4 Connecting Summit Z2-16 to the DUT . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Device Emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Host Emulation Test Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Final Steps: Power on the Exerciser and then DUT . . . . . . . . . . . . . . . 22

3.5 Connecting Summit Z2-16 to a T2-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Section 2. Exerciser Traffic Generation . . 25

Chapter 4 Traffic Generation . . . . . . . . . . . . . . . . . . . . . 27

4.1 Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.1 Traffic Generation Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.2 Creating a Traffic Generation File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Exporting a CATC Trace to a Traffic Generation File . . . . . . . . . . . . . . 31

Saving a Script to a New File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Creating a New Empty Generation File. . . . . . . . . . . . . . . . . . . . . . . . . 33

4.3 Editing Generation Files with the Script Editor . . . . . . . . . . . . . . . . . . . . . 34

Script Editor Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Script Edit Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Command Properties Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Script Editor File Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Script Editor Error Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

View Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

4.4 Generation Options Dialogs Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Opening the Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Summit Z2-16 Exerciser User Manual

iv Teledyne LeCroy

4.5 Generation Options for Summit Z2-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

4.6 Generating Traffic: Set Generation Options . . . . . . . . . . . . . . . . . . . . . . . 51

4.7 Generating Traffic: Prepare Traffic Generation . . . . . . . . . . . . . . . . . . . . . 52

4.8 Generating Traffic: Begin Traffic Generation . . . . . . . . . . . . . . . . . . . . . . . 53

Chapter 5 Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5.1 Macros. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Default Macros: Connect and Disconnect. . . . . . . . . . . . . . . . . . . . . . . 55

5.2 Adding New Script Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Using the Generation Macros Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Adding Script Files to the GenScriptMacros Directory . . . . . . . . . . . . . 57

5.3 Modifying Script Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

5.4 Changing the Order of Macro Icons on the Status Bar . . . . . . . . . . . . . . . 58

5.5 Deleting User-Defined Script Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

5.6 Restoring the Default Appearance of the Connect and Disconnect Icons. 59

Chapter 6 Configuration Space . . . . . . . . . . . . . . . . . . . 61

6.1 Configuration Space Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

6.2 Launching the Configuration Space Editor . . . . . . . . . . . . . . . . . . . . . . . . 61

Configuration Space Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

6.3 BARs Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

6.4 Configuration Read and Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Chapter 7 Address Spaces. . . . . . . . . . . . . . . . . . . . . . . 67

7.1 Memory/IO Space Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

7.2 Memory Region for Host Emulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Chapter 8 Updates and Licensing . . . . . . . . . . . . . . . . . 69

8.1 Updating the Exerciser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

8.2 License Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

8.3 License Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Appendix A Configuration Space Decoding . . . . . . . . . . 71

A.1 Mandatory Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

A.2 Mandatory Module Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

A.3 Configuration Register Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

A.4 Primitives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

A.5 Helper File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Appendix B China Restriction of Hazardous Substances

Table74

How to Contact Teledyne LeCroy . . . . . . . . . . . . . . . . . . 75

Index 77

Summit Z2-16 Exerciser User Manual Section 1

Teledyne LeCroy 1

Section 1. General

Section 1 Summit Z2-16 Exerciser User Manual

2Teledyne LeCroy

Summit Z2-16 Exerciser User Manual Chapter 1: Overview

Teledyne LeCroy 3

Chapter 1: Overview

Designed for developers and validators, the Teledyne LeCroy Summit Z2-16™ is a

Gen1/Gen2 PCI Express advanced verification system.

By leveraging years of experience in protocol analysis tools for emerging markets,

Summit Z2-16 blends sophisticated functionality with practical features to speed the

development of PCI Express™ IP cores, semiconductors, bridges, switches, add-in

boards, and systems.

1.1 Summit Z2-16 Exerciser Hardware

Features and Benefits

Summit Z2-16 Exercisers have these features and benefits

Features Benefits

Bidirectional x1-x16,

2.5 GBps to 5.0 GBps

generation support

Accurate generation of PCI Express bus traffic

Script level traffic generation Programmability to test PCI Express components with

more precision and control

Manual Error injection Verify fault handling and identify error recovery

Host/End-Point Emulation Support Host emulation platform/end-point emulation

Interposer allows for design and stress testing.

Programmable Physical Layer Flexibility to program lane skews, link control bits, skip

intervals and link states for more robust verification

Programmable Data Link Layer Ability to modify flow control, ACK/NAK, and retry

behaviors

Flexible/programmable Transaction Layer User ability to define arbitrary sequence of

transactions, payload generation, and conditional

repeat of transactions provide users with maximum

flexibility

Point and Click Script Editor Complex scripts can be created quickly and easily

Read/modify/playback capability Allows automatic generation of Exerciser scripts

based on a captured CATC Trace recording.

Chapter 1: Overview Summit Z2-16 Exerciser User Manual

4Teledyne LeCroy

Programmable ACK/NAK behavior ACK all TLP packets

NAK all TLP packets

Automatic ACK/NAK behavior

ACK/NAK delay timer

Programmable Flow control behavior Set Credit values

Disable Credit checking

Set Update FC intervals

Automatic CRC

calculation and Sequence number

assignment

DLLP CRC calculation

TLP LCRC calculation

Replay buffer Programmable Transaction timeout timer

Auto Recovery behavior after 4 Replays

Programmable

configuration space

Full 4 KB configuration space configurable by user

Accessible through Configuration Reads and Writes

over PCI Express

Endpoint memory emulation Up to 1 GB memory accessible through memory read

and write

Fast Transit module Special hardware-accelerated module to increase

link utilization

Summit Z2-16 Exerciser User Manual Chapter 1: Overview

Teledyne LeCroy 5

1.2 Summit Z2-16 Exerciser

Teledyne LeCroy Summit Z2-16, a Gen2 PCI Express 16-lane advanced Exerciser

system, is a critical test and verification tool intended to assist engineers in improving the

reliability of their systems. It can emulate PCI Express root complexes or device

endpoints. You can test PCI Express IP cores, semiconductors, bridges, switches, and

systems.

The Summit Z2-16 is a stand-alone PCI Express Exerciser that can generate and

respond to all types of PCI Express transactions. The scripting language allows creation

of Transaction Layer Packets (TLPs), Data Link Layer Packets (DLLPs) and Ordered

Sets. ACK's and NAK's can be automatically generated under user control.

A Configuration Space can be easily created using the Configuration Space Editor.

The scripting language is powerful yet easy to use. One way to create test scripts is to

export traffic from a CATC Trace file captured with Teledyne LeCroy PETracer. You can

then modify the exported script to generate different test cases, insert errors, or create

loop tests. The “point and click” capability of the script editor simplifies modifying or

creating scripts.

1.3 Other Documents

For more information, refer to the following documents:

• Teledyne LeCroy Analyzers File-based Decoding Manual

• PETracer/Trainer Automation Manual

• PETracer VSE Manual

• PETracer Gen2 Multi Lead Probe User Manual

• PETrainer Scripting Language Reference Manual

•PETracer Online Help

Chapter 1: Overview Summit Z2-16 Exerciser User Manual

6Teledyne LeCroy

Inhaltsverzeichnis

Andere Teledyne Lecroy Fitnessgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy Summit Z416 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung