Teledyne Lecroy M41h Bedienungsanleitung

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 1 Rev A6 - May 29, 2020

M41h 48G Video

Analyzer/Generator

for HDMI 8K Testing

Quick Start Guide

Rev: A6

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1 
Page 2 Rev A6 - May 29, 2020 
Table of Contents 
 
1Scope of this Quick Start Guide 3 
1.1 Topics Covered in this Quick Start Guide 3 
1.2 Changes to this Quick Start Guide 3 
2About the M41h 4 
3About the ATP Manager GUI Application 4 
4Getting Started 6 
4.1 What is in the M41h shipping box? 6 
4.2 Positioning/Orientation 6 
4.3 Connectors and Controls 7 
4.4 Getting the M41h Up and Running 8 
5Managing the M41h with ATP Manager from a PC 11 
5.1 Install the M41h ATP Manager GUI Application 12 
5.2 Setting the Instrument date and time 21 
6Connecting the Devices Under Test 22 
6.1 Connecting an HDMI Source Device Under Test 23 
6.2 Connecting an HDMI Sink Device Under Test 24 
7Upgrading ATP Manager 26 
 

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 3 Rev A6 - May 29, 2020

1Scope of this Quick Start Guide

This Quick Start Guide provides basic setup and configuration of the

M41h 48G Video Analyzer/Generator and the Advanced Test Platform

(ATP) Manager GUI application used to manage it.

1.1 Topics Covered in this Quick Start Guide

The following high level tasks are described in this Quick Start Guide:

Getting Started Procedures.

Provisioning the IP address of the M41h.

Installing the M41h ATP Manager on a PC.

Establishing an IP session between an M41h and the host PC

running the ATP Manager.

Connecting the HDMI source or sink devices under test to the M41h.

This Quick Start Guide does not include descriptive or procedural

information for any of the video test functions of the M41h applications

themselves. Procedures for the functional applications are covered in the

M41h User Guide. The procedures for running compliance tests are

covered in the HDMI MOIs available on the quantumdata website or from

HDMI, Forum. The User Guide is available from the product page on the

quantumdata website https://www.quantumdata.com/m41h.html.

1.2 Changes to this Quick Start Guide

This QSG has been updated to inform users that you must connect the

external display to the HDMI admin port (not the DisplayPort port) on the

back of the M41h, before you power up the M41h system. If you have

powered up the M41h prior to connected a display you will have to

reboot the M41h.

Note: Please be sure to check the quantumdata website

(https://www.quantumdata.com/m41h.html) for updates to this Quick

Start Guide & User Guide.

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 4 Rev A6 - May 29, 2020

2About the M41h

The M41h is a compact versatile HDMI 2.1-capable video generator and

video analyzer offering entry level functional testing that can be

extended through software licenses to full compliance testers with

sophisticated analysis and diagnostic capabilities.

M41h 48G Video Analyzer/Generator

3About the ATP Manager GUI Application

The M41h is operated through the Advanced Test Platform (ATP)

Manager. The ATP Manager is a GUI application that can run either on a

Windows host PC or on an external display connected to the HDMI or

DisplayPort port on the back of the M41h.

When operating from a host PC the ATP Manager application has to be

installed on the PC. When operating from an external display, a mouse

(provided) is required and a keyboard is optional but recommended. In

this case of the external display, the ATP Manager is running on the

M41h itself but the ATP Manager GUI is displayed on the external

monitor. These operational scenarios are shown below.

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 5 Rev A6 - May 29, 2020

ATP Manager Running on External Display (Source Test Example)

ATP Manager Running on Host PC (Sink Test Example)

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 6 Rev A6 - May 29, 2020

4Getting Started

This chapter explains what is involved in getting your M41h up and

operating.

4.1 What is in the M41h shipping box?

When a Teledyne LeCroy quantumdata M41h is shipped it will contain

the following additional items:

•AC Power Line Cord.

•CE mark declaration.

•Hi-Speed HDMI Cable.

•Ethernet Cable.

•Mouse.

•This Quick Start Guide.

4.2 Positioning/Orientation

The M41h can be positioned either flat or upright. These two orientations

are depicted below:

Flat Positioning Upright Positioning

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 7 Rev A6 - May 29, 2020

4.3 Connectors and Controls

The following table describes the connectors and controls on the M41h

Front and Back panels.

M41h Configurations

Information / Function

Protocol Analyzer in M41h

Front panel:

▪A –HDMI 2.1 Rx port for

analyzing HDMI 2.1 sources.

▪B –HDMI 2.1 Tx port for

testing HDMI 2.1 sinks.

▪C –HDMI 2.1 Tx port used

for reading the EDID over the

DDC channel (applies to

eARC Tx test). Do not

connect with TRIG IN.

▪D –USB ports (2) used for

connecting a mouse and

keyboard.

▪E –Volume knob for turning

up or down the volume for

the internal speaker.

▪F –Power button.

Back panel:

▪G –Power plug

(100-240VAC 50/60Hz)

▪H - HDMI –Admin port for

connecting external HDMI

UHD display for M41h ATP

Manager.

▪I - DisplayPort –Not

recommended for use currently.

▪J - USB/USB-C (2 ea.) –For

mouse & keyboard.

▪K - RJ45 (2) - E1 Network for

connecting host PC running

ATP Mgr. E2 Aux –Not used

▪L - DVI –Possible future use.

▪M - RS-232 (2) –Possible

future use.

▪N - Audio (2) –Possible

future use.

▪O - TRIG IN/OUT –IN for

triggering a capture. Do not

connect with HDMI DDC.

▪P - RCA SPDIF OUT –OUT:

Monitors eARC audio.

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 8 Rev A6 - May 29, 2020

4.4 Getting the M41h Up and Running

Use the following procedures to get your M41h up and running.

1. Remove the M41h from the shipping box and lay it flat or upright on

your desktop or benchtop.

2. Connect the M41h power cable (provided) to a suitable outlet

(100-240V 50/60Hz). The power receptacle is on the back of the

M41h as shown below.

3. Connect an external HDMI or DisplayPort monitor to the HDMI or

DisplayPort connectors on the back of the M41h; labeled “External

Monitor” at the location indicated below.

The setup is depicted below.

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 9 Rev A6 - May 29, 2020

4. Connect a mouse to one of the USB ports on the front or back of the

M41h as shown below.

5. Optionally connect a keyboard to one of the other USB ports on the

front or the back of the M41h. You can also use the virtual

keyboards that present themselves in the ATP Manager.

6. Power up the M41h via the power button on the front of the M41h.

M41h 48G Video Analyzer/Generator - Quick Start Guide Rev. A1

Page 10 Rev A6 - May 29, 2020

Notes: Regarding Power Button color:

- The Power button will be Red if the power is off when a power

connection in is in place in the back of the M41h.

- The Power button will be Blue (or Yellow) during

initialization.

- The Power button will be Green when the M41h has

completed full initialization.

The ATP Manager application will appear on the external display as

shown below.

7. Connect your HDMI source or sink device under test to the

appropriate In/Rx or Out/Tx port on the front of the M41h. The

following example shows an HDMI source device connected.

Inhaltsverzeichnis

Andere Teledyne Lecroy Messgerät Handbücher

Teledyne Lecroy

Teledyne Lecroy Quantumdata 780E Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook ZS4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy BPA 600 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP150 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook Frontline X500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HVFO103 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy SierraNet M328 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP016 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy DXC100A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline SD Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy LabMaster LM 10-25Zi-A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PCI Express 2.0 Mid-Bus Probe Einrichtungshandbuch

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP031 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP4030 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP2060 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline NFC-F Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy M42de Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 980 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP008 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline 802.11 Montageanleitung

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MDA800A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung