Teledyne AX300-I Bedienungsanleitung

Portable Oxygen Analyzer

Teledyne Analytical Instruments i

OPERATING & SERVICE INSTRUCTIONS FOR

AX300-I

PORTABLE OXYGEN ANALYZER

0086

TYPE B APPLIED PART:

Equipment provides a degree of protection against electric shock,

particularly regarding—

• Allowable Leakage Current

• Reliability of the protective earth connection (if present).

P/N M75708

Jun 30, 2009

CO 09-008

AX300-I

Teledyne Analytical Instruments ii

No part of this manual may be reproduced, transmitted, transcribed, stored in a retriev-

al system, or translated into any other language or computer language in whole or in

part, in any form or by any means, whether it be electronic, mechanical, optical, ma-

nual, or otherwise, without prior written consent of Teledyne Analytical Instruments,

16830 Chestnut Street, City of Industry, CA 91749-1580, USA.

Warranty

Teledyne warrants that the goods are free from defects of material and of construction

for a period of 2 years (or less, as the case may be, with consumables) from the date of

shipment from Teledyne. The liability of Teledyne, if any, shall be limited solely to the

replacement or repair of the goods, and shall not include shipping costs or other inci-

dental damages as defined in Section 2-715 of the U.S. Uniform Commercial Code.

Teledyne cannot warrant any damage resulting from unauthorized repair, misuse, im-

proper maintenance, negligence, or other events not caused by Teledyne or our goods.

CAUTION: FEDERAL LAW RESTRICTS THIS DEVICE TO SALE BY OR

ON THE ORDER OF A PHYSICIAN.

Portable Oxygen Analyzer

Teledyne Analytical Instruments iii

About This Manual

This Manual describes the installation, configuration, operation and

maintenance instructions for Model AX300-I portable oxygen analyzer.

This Manual contains Cautions, Warnings, and Notes to ensure safe

and efficient performance of the analyzer.

For convenience with operating and maintaining your analyzer, this

manual includes Specifications, Troubleshooting and Maintenance Spare

Parts sections.

How To Use This Manual

This manual is designed to walk you through the initial set-up of

the AX300-I Portable Oxygen Analyzer. After you have used it to in-

itially commission your analyzer, it becomes a quick reference guide to

help you with specific questions or operating challenges.

Before operating the analyzer for the first time, you are advised to

read and familiarize yourself with the contents of this manual.

AX300-I

Teledyne Analytical Instruments iv

Safety Messages

Your safety and the safety of others are very important. Please care-

fully read and understand the Caution, Warning and Notes found in sev-

eral places in the manual.

CAUTION: THE ANALYZER SHOULD ONLY BE USED FOR THE PUR-

POSES AND IN THE MANNER DESCRIBED IN THIS MA-

NUAL.

IF YOU USE THE ANALYZER IN A MANNER OTHER THAN

THAT FOR WHICH IT WAS INTENDED, UNPREDICTABLE

BEHAVIOR COULD RESULT POSSIBLY ACCOMPANIED

WITH HAZARDOUS CONSEQUENCES.

Portable Oxygen Analyzer

Teledyne Analytical Instruments v

Table of Contents

Safety Messages ..........................................................................iv

List of Figures..............................................................................vii

List of Tables..............................................................................viii

Introduction ...................................................................................1

1.1 Features 2

1.2 Options 3

1.3 Applications 3

1.4 Operation Summary 3

Operating Instructions..................................................................5

2.1 Setup 5

2.1.1 Sensor Installation or Replacement 5

2.1.2 Mounting 7

2.1.2.1 V-Mount Adapter Installation 7

2.1.2.2 Universal Mounting Clamp Installation 8

2.1.3 Battery Installation 8

2.1.4 Calibration 9

2.1.5 Output 0-1 VDC or RS232 11

2.2 Operating Instructions 13

2.2.1 Procedure 13

2.3 Factors Affecting Sampling Accuracy 14

2.3.1 Humidity 14

2.3.2 Temperature 15

2.3.3 Pressure 15

2.3.4 Discrepancy in Readings 15

2.3.5 Anesthetic Gases 16

2.3.5.1 Gases That MAY INDUCE Reading Error 16

2.3.5.2 Care After Use in Nitrous Oxide 17

2.3.6 Cleaning 17

2.4 Dos and Don’ts 17

Service Instructions....................................................................19

AX300-I

Teledyne Analytical Instruments vi

3.1 General Service Information 19

3.2 Overall Maintenance 19

3.3 Battery Maintenance 19

3.4 Sensor Maintenance 19

3.5 Calibration 20

3.6 Factors Affecting Sampling Accuracy 20

3.7 Troubleshooting 20

3.8 Watchdog 23

3.9 Other Problems with the Analyzer 24

3.10 Return Authorization for Service 24

Appendix......................................................................................25

A.1 Specifications 25

A.2 Spare Parts List 26

A.3 Optional Accessories 26

Portable Oxygen Analyzer

Teledyne Analytical Instruments vii

List of Figures

Figure 1-1: AX300-I Front View ....................................................... 1

Figure 2-1: Installing the R17MED Sensor ...................................... 6

Figure 2-2: Sensor Cable Connection to Analyzer ......................... 6

Figure 2-3: Mounting the Sensor in the Tee Adapter....................... 7

Figure 2-4: V-Mount Adapter Installation ......................................... 7

Figure 2-5: Brass Insert for Universal Mounting Clamp................... 8

Figure 2-6: Installing Batteries......................................................... 9

Figure 2-7: Calibration Sequence.................................................. 10

Figure 2-8: 0-1 VDC or RS 232 Digital Output Port ....................... 12

AX300-I

Teledyne Analytical Instruments viii

List of Tables

Table 2-1: Oxygen Reading Error in a Mixture of Anesthetic Gas. 16

Table 3-1 Troubleshooting ............................................................ 20

Table 3.2 Error Codes................................................................... 23

Portable Oxygen Analyzer Introduction

Teledyne Analytical Instruments 1

Introduction

The Teledyne Analytical Instruments AX300-I Oxygen Analyzer,

hereinafter referred to as AX300-I or analyzer, is a portable analyzer de-

signed to analyze oxygen concentration in medical gas mixtures. Oxy-

gen analysis is linear across the single range of 0-100% using Tele-

dyne’s class R17MED oxygen sensor.

Figure 1-1: AX300-I Front View

The AX300-I’s liquid crystal display (LCD) consists of up to 3.5

characters plus a decimal point indicator capable of displaying up to

105%. An integral battery life indicator is displayed continuously on the

AX300-I.

The analyzer is powered by three AA alkaline batteries and is de-

signed to operate for 2000 hours on a single set of batteries in a Non-

alarm State.

A sensor failure alarm is incorporated which warns the user if the

sensor signal is lost or low. When this occurs, the √SENSOR display

and a visual green light will flash, and the alarm buzzer will activate.

Introduction AX300-I

Teledyne Analytical Instruments 2

This alarm condition is also triggered when the oxygen concentration at

the point of analysis falls below 18% (Reference: ISO 7767 standard).

For safety reasons, the audible alarm cannot be silenced until the alarm

condition is resolved.

CAUTION: DURING NORMAL USE, ALARM CONDITIONS SHOULD

NOT BE OVERRIDDEN BY ACTIONS SUCH AS HOLDING

THE ALARM SILENCE KEY DEPRESSED OR REMOVING

THE BATTERIES. THE CAUSE FOR THE ALARM CONDI-

TION SHOULD FIRST BE RESOLVED.

CAUTION: WHILE HOLDING DOWN THE ALARM SILENCE KEY MAY

MOMENTARILY SILENCE THE ALARM BUZZER, AUDIBLE

ALARM WILL RETURN UPON DISENGAGING THE ALARM

SILENCE KEY. HOLDING THE KEY FOR LONGER DURA-

TIONS WILL INITIATE THE “STUCK KEY” ALARM, WHICH

CAN BE DEACTIVATED ONLY VIA REMOVING THE BAT-

TERIES FROM THE ANALYZER. ANALYZER SHOULD BE

RECALIBRATED UP ON REPOWERING THE ANALYZER.

NOTE: THE ALARM SILENCE KEY DOES NOT PLAY ANY ROLE IN

THIS VERSION OF THE ANALYZER. IT IS DESIGNED IN

FOR ANY POSSIBLE FUTURE PRODUCT MODIFICATION.

1.1 Features

The following features are standard on the AX300-I:



Large easy to read 3½-digit LCD (see options)



Automatic LCD back lighting upon key press



Microprocessor controlled



Sensor fail/disconnect alarm indicator (audible and visual)



Non-adjustable concentration alarm below 18% O



2000 operating hours from 3 AA alkaline batteries



Battery status indicator



Stand for upright tabletop deployment



Optional hardware for pole clamping and V block support



Rugged high impact ABS plastic construction



Splash resistant case.



Long life class R17MED sensor



0-1 VDC digital output (optional RS-232)



FDA 510(k) market clearance and CSA/CE marking

Inhaltsverzeichnis

Andere Teledyne Analytisches Instrument Handbücher

Teledyne

Teledyne 306WA Bedienungsanleitung

Teledyne

Teledyne 3000ZA2G Bedienungsanleitung

Teledyne

Teledyne 2120 Bedienungsanleitung

Teledyne

Teledyne 316RA Bedienungsanleitung

Teledyne

Teledyne 4040 Stücklistenhandbuch

Teledyne

Teledyne 3000PB Bedienungsanleitung

Teledyne

Teledyne 335 Series Bedienungsanleitung

Teledyne

Teledyne 3000ZA-3X Bedienungsanleitung

Teledyne

Teledyne 307WA Bedienungsanleitung

Teledyne

Teledyne 3000TA-XL-EU Bedienungsanleitung

Teledyne

Teledyne 3000PA-EU Bedienungsanleitung

Teledyne

Teledyne 402R-EU Bedienungsanleitung

Teledyne

Teledyne 3000MB Bedienungsanleitung

Teledyne

Teledyne Snack O2 Bedienungsanleitung

Teledyne

Teledyne 6650B Bedienungsanleitung

Teledyne

Teledyne 3190 Series Bedienungsanleitung

Teledyne

Teledyne 311XL Series Bedienungsanleitung

Teledyne

Teledyne 318R Bedienungsanleitung

Teledyne

Teledyne 6400A Bedienungsanleitung

Teledyne

Teledyne 3010PA Bedienungsanleitung

Teledyne

Teledyne 3000MA Bedienungsanleitung

Teledyne

Teledyne 3010PAC Bedienungsanleitung

Teledyne

Teledyne 3020T Bedienungsanleitung

Teledyne

Teledyne BDS 3000 Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung

Würth

Würth MASTERVISION MINI REC Bedienungsanleitung

AMI

AMI 2001LC Bedienungsanleitung